The American Society for Testing and Materials (ASTM) is an independent organization devoted to the development of standards.

American Society for Testing and Materials

Organ printing can be defined as layer-by-layer additive robotic biofabrication of three-dimensional functional living macrotissues and organ constructs using tissue spheroids as building blocks. The microtissues and tissue spheroids are living materials with certain measurable, evolving and potentially controllable composition, material and biological properties. Closely placed tissue spheroids undergo tissue fusion - a process that represents a fundamental biological and biophysical principle of developmental biology-inspired directed tissue self-assembly. It is possible to engineer small segments of an intraorgan branched vascular tree by using solid and lumenized vascular tissue spheroids. Organ printing could dramatically enhance and transform the field of tissue engineering by enabling large-scale industrial robotic biofabrication of living human organ constructs with "built-in" perfusable intraorgan branched vascular tree. Thus, organ printing is a new emerging enabling technology paradigm which represents a developmental biology-inspired alternative to classic biodegradable solid scaffold-based approaches in tissue engineering.

Organ Printing: Tissue Spheroids as Building Blocks

Three-dimensional (3D) printed scaffold and material selection for bone repair

Osteocytes comprise the overwhelming majority of cells in bone and are its only true "permanent" resident cell population. In recent years, conceptual and technological advances on many fronts have helped to clarify the role osteocytes play in skeletal metabolism and the mechanisms they use to perform them. The osteocyte is now recognized as a major orchestrator of skeletal activity, capable of sensing and integrating mechanical and chemical signals from their environment to regulate both bone formation and resorption. Recent studies have established that the mechanisms osteocytes use to sense stimuli and regulate effector cells (e.g., osteoblasts and osteoclasts) are directly coupled to the environment they inhabit-entombed within the mineralized matrix of bone and connected to each other in multicellular networks. Communication within these networks is both direct (via cell-cell contacts at gap junctions) and indirect (via paracrine signaling by secreted signals). Moreover, the movement of paracrine signals is dependent on the movement of both solutes and fluid through the space immediately surrounding the osteocytes (i.e., the lacunar-canalicular system). Finally, recent studies have also shown that the regulatory capabilities of osteocytes extend beyond bone to include a role in the endocrine control of systemic phosphate metabolism. This review will discuss how a highly productive combination of experimental and theoretical approaches has managed to unearth these unique features of osteocytes and bring to light novel insights into the regulatory mechanisms operating in bone.

Osteocytes: Master Orchestrators of Bone

Regenerative medicine holds the promise of engineering functional tissues or organs to heal or replace abnormal and necrotic tissues/organs, offering hope for filling the gap between organ shortage and transplantation needs. Three-dimensional (3D) bioprinting is evolving into an unparalleled biomanufacturing technology due to its high-integration potential for patient-specific designs, precise and rapid manufacturing capabilities with high resolution, and unprecedented versatility. It enables precise control over multiple compositions, spatial distributions, and architectural accuracy/complexity, therefore achieving effective recapitulation of microstructure, architecture, mechanical properties, and biological functions of target tissues and organs. Here we provide an overview of recent advances in 3D bioprinting technology, as well as design concepts of bioinks suitable for the bioprinting process. We focus on the applications of this technology for engineering living organs, focusing more specifically on vasculature, neural networks, the heart and liver. We conclude with current challenges and the technical perspective for further development of 3D organ bioprinting.

https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201601118%4010.1002/%28ISSN%292192-2659.Biofabrication-for-Tissue-Engineering

3D Bioprinting for Organ Regeneration

Comparison of standard two-dimensional and three-dimensional corrected glenoid version measurements.

Background:Accurate analysis of osseous glenoid morphology is important in treating glenohumeral arthritis and instability. Two-dimensional computed tomography scans are used to evaluate glenoid alignment. Accuracy of this method is dependent on the angle of axial reconstruction in relation to the p

Two-dimensional glenoid version measurements vary with coronal and sagittal scapular rotation.

Additive manufacturing technologies, including three-dimensional printing (3DP), have unlocked new possibilities for bone tissue engineering. Long-term regeneration of normal anatomic structure, shape, and function is clinically important subsequent to bone trauma, tumor, infection, nonunion after fracture, or congenital abnormality. Due to the great complexity in structure and properties of bone across the population, along with variation in the type of injury or defect, currently available treatments for larger bone defects that support load often fail in replicating the anatomic shape and structure of the lost bone tissue. 3DP could provide the ability to print bone substitute materials with a controlled chemistry, shape, porosity, and topography, thus allowing printing of personalized bone grafts customized to the patient and the specific clinical condition. 3DP and related fabrication approaches of bone grafts may one day revolutionize the way clinicians currently treat bone defects. This ar...

3D Printing of Personalized Artificial Bone Scaffolds.

Glenoid spherical orientation and version.

Mechanical unloading induces muscle atrophy and bone loss; however, the time course and interdependence of these effects is not well defined. We subjected 4-month-old C57BL/6J mice to hindlimb suspension (HLS) for 3 weeks, euthanizing 12 to 16 mice on day (D) 0, 7, 14, and 21. Lean mass was 7% to 9% lower for HLS versus control from D7-21. Absolute mass of the gastrocnemius (gastroc) decreased 8% by D7, and was maximally decreased 16% by D14 of HLS. mRNA levels of Atrogin-1 in the gastroc and quadriceps (quad) were increased 99% and 122%, respectively, at D7 of HLS. Similar increases in MuRF1 mRNA levels occurred at D7. Both atrogenes returned to baseline by D14. Protein synthesis in gastroc and quad was reduced 30% from D7-14 of HLS, returning to baseline by D21. HLS decreased phosphorylation of SK61, a substrate of mammalian target of rapamycin (mTOR), on D7-21, whereas 4E-BP1 was not lower until D21. Cortical thickness of the femur and tibia did not decrease until D14 of HLS. Cortical bone of controls did not change over time. HLS mice had lower distal femur bone volume fraction (-22%) by D14; however, the effects of HLS were eliminated by D21 because of the decline of trabecular bone mass of controls. Femur strength was decreased approximately 13% by D14 of HLS, with no change in tibia mechanical properties at any time point. This investigation reveals that muscle atrophy precedes bone loss during unloading and may contribute to subsequent skeletal deficits. Countermeasures that preserve muscle may reduce bone loss induced by mechanical unloading or prolonged disuse. Trabecular bone loss with age, similar to that which occurs in mature astronauts, is superimposed on unloading. Preservation of muscle mass, cortical structure, and bone strength during the experiment suggests muscle may have a greater effect on cortical than trabecular bone.

Gregory S. Lewis

Papers

Comparison of standard two-dimensional and three-dimensional corrected glenoid version measurements.

Two-dimensional glenoid version measurements vary with coronal and sagittal scapular rotation.

3D Printing of Personalized Artificial Bone Scaffolds.

Glenoid spherical orientation and version.

Interdependence of muscle atrophy and bone loss induced by mechanical unloading