Polymer/Inorganic nanocomposite coatings with superior corrosion protection performance: A review

In the present work, prototypes of polymeric cantilever-based magnetic microstructures were fabricated by means of stereolithography (SL). To this end, a UV-curable system suitable for high-resolution SL-processing was formulated by blending a bifunctional acrylic monomer with photoinitiator and visible dye whose content was tuned to tailor resin SL sensitivity. Subsequently, to confer ferromagnetic properties to the photopolymer, two different strategies were implemented. A two-step approach involved selective deposition of a metal layer on photopolymer SL-cured surfaces through an electroless plating process. On the other hand, SL-processable ferromagnetically responsive nanocomposites (FRCs) were obtained by directly loading magnetite nanoparticles within the photopolymer matrix. In order to achieve high-printing resolution, resin SL sensitivities were studied as a function of the various additives contents. Photocalorimetric analyses were also performed to investigate the photopolymer conversion effic...

3D Printing of Cantilever-Type Microstructures by Stereolithography of Ferromagnetic Photopolymers.

It is of great significance to realize high thermal conductivity of polymer composites, which are used in electronic devices. However, traditional polymer composites exhibit limited thermal conductivity due to high interfacial thermal resistance. Herein, network Al2O3 (N-Al2O3) with multidimensional continuous structures is fabricated by a feasible strategy and first used as fillers for phenolic resin (PR), achieving significantly enhanced thermal conductivity of 4.01 Wm−1 K−1, enhanced by 1800% compared with neat matrix. The unique N-Al2O3 is responsible for the excellent thermal conductivity, which contributes to the continuous thermal transfer pathways with decreased interfacial thermal resistance. Additionally, owing to the interpenetrating structure of N-Al2O3 and PR, composites display improved mechanical properties and thermal stability. Dielectric loss tangent of composites decreases with increasing N-Al2O3, which is unusual and desired for thermal interface materials used in electronic devices. Therefore, our strategy offers new guidelines in fabricating high-quality composites for commercial applications.

Design of network Al2O3 spheres for significantly enhanced thermal conductivity of polymer composites

Among carbon fillers, carbon fiber is considered to be an ideal reinforcement for epoxy because of its outstanding electrical, mechanical, and thermal features. Several inorganic fillers such as zinc oxide, titania, and silica are also used in epoxy matrix for property enhancement. The review initially focuses the preparation methods and physical characteristics of epoxy/carbon fiber composite. Afterward, fabrication and properties of epoxy/zinc oxide/titania/silica composites are also conversed. Moreover, the effect of filler dispersion on polymer properties’ improvement is also highlighted. Epoxy/carbon fiber composites are employed more frequently and effectively in defense-related applications compared with epoxy/inorganic nanofiller composite.

Epoxy Resin Composite Reinforced with Carbon Fiber and Inorganic Filler: Overview on Preparation and Properties

The layer-by-layer (LbL) assembly approach is a versatile way for the construction of multilayered nanoparticles coating. We demonstrated that the TiO 2 nanoparticles could be assembled on magnesium (Mg) alloys via the modification of opposite charged poly(styrenesulfonate) and polyethylenimine. Adsorption of the polyelectrolyte layer occurred in the beaker where particles and the selected polyelectrolyte solution were mixed, creating a layer of polyelectrolyte on the nanoparticles. Then these surfaced-modified nanoparticles were LbL assembled on the Mg alloy by electro-deposition. Finally, the surface silanization would prevent the peeling off of the TiO 2 nanoparticles and leads to stable assembly. The coated samples were examined using field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The corrosion of the alloys was examined using potentiodynamic polarization, electrochemical impedance spectroscopy. The results show that a well-controlled and integrated silanized LbL system has been constructed via PMTMS and polyelectrolyte modified nanoparticles, which could provide good protection for Mg alloys.

Electrodeposition of TiO2 layer-by-layer assembled composite coating and silane treatment on Mg alloy for corrosion resistance

Effect of silane surface modified titania nanoparticles on the thermal, mechanical, and corrosion protective properties of a bisphenol-A based phthalonitrile resin

A new type of nanocomposites based on a high performance bisphenol-A phthalonitrile resin and surface-modified alumina nanoparticles was prepared by a hot compression molding technique. The effect of adding different amounts of the reinforcing phase on the thermal and mechanical properties of the resulting nanocomposites was investigated. Thermogravimetric analysis showed that the starting decomposition temperatures and the residual weight at 800°C were highly improved upon adding the nanofillers. At 15 wt% nanoloading, the glass transition temperature and the storage modulus were considerably enhanced, reaching 346°C and 3.4 GPa, respectively. The tensile strength and modulus as well as the microhardness values increased with the increasing amount of the nanoparticles. The tensile modulus calculations were investigated using Series, Halpin-Tsai, and Kerner models. Haplin-Tsai model was found to reproduce the experimental data with the best accuracy. Estimation of the nanofillers shape factors for both Haplin-Tsai and Kerner models significantly improved the precision of the cited predictive models. The fractured surface of the nanocomposites analyzed by SEM exhibited homogeneous and rougher surfaces compared to that of the pristine resin. Finally, this new kind of nanocomposites is a highly attractive candidate for use in advanced technological applications such as the aerospace and military fields.POLYM. COMPOS., 2015. © 2015 Society of Plastics Engineers

Thermal and mechanical properties enhancements obtained by reinforcing a bisphenol‐a based phthalonitrile resin with silane surface‐modified alumina nanoparticles

H.K.S. Rahoma

Papers

Effect of silane surface modified titania nanoparticles on the thermal, mechanical, and corrosion protective properties of a bisphenol-A based phthalonitrile resin

Thermal and mechanical properties enhancements obtained by reinforcing a bisphenol‐a based phthalonitrile resin with silane surface‐modified alumina nanoparticles

Effect of (α + β) heat treatment on microstructure and mechanical properties of (TiB + TiC)/Ti–B20 matrix composite