The total annual production of synthetic dye is more than 7 × 105 tons. Annually, through only textile waste effluents, around one thousand tons of non-biodegradable textile dyes are discharged into natural streams and water bodies. Therefore, with growing environmental concerns and environmental awareness there is a need for the removal of dyes from local and industrial water effluents with a cost effective technology. In general, these dyes have been found to be resistant to biological as well as physical treatment technologies. In this regard, heterogeneous advanced oxidation processes (AOPs), involving photo-catalyzed degradation of dyes using semiconductor nanoparticles is considered as an efficient cure for dye pollution. In the last two decades TiO2 has received considerable interest because of its high potential as a photocatalyst to degrade a wide range of organic material including dyes. This review starts with (i) a brief overview on dye pollution, dye classification and dye decolourization/degradation strategies; (ii) focuses on the mechanisms involved in comparatively well understood TiO2 photocatalysts and (iii) discusses recent advancements to enhance TiO2 photocatalytic efficiency by (a) doping with metals, non-metals, transition metals, noble metals and lanthanide ions, (b) structural modifications of TiO2 and (c) immobilization of TiO2 by using various supports to make it a flexible and cost-effective commercial dye treatment technology.

https://pubs.rsc.org/EN/content/articlepdf/2014/ra/c4ra06658h

Principles and mechanisms of photocatalytic dye degradation on TiO 2 based photocatalysts: a comparative overview

https://iris.unipa.it/bitstream/10447/74239/1/Di%20Paola-J%20hzardous%20mater%202012-survey.pdf

A survey of photocatalytic materials for environmental remediation.

We have reviewed the humidity sensors based on ceramic materials. We first discuss the operating principle of ceramic humidity sensors. This is followed by a section on the relationship between the conduction mechanism and microstructure characteristics of the sensing elements of ceramic humidity sensors. This part of the review is also focused on the methods for optimization of the microstructure of ceramic porous elements. The next section summarizes the information on the materials used for the ceramic humidity sensors fabrication and effect of dopants or hybrid compositions on the sensing ceramic-based materials. Then we analyze state-of-the-art techniques for producing ceramic sensors. The key research and technological challenges in the field are discussed at the end of the review. The review is based on 424 references published during from 1998–2013.

Recent trends of ceramic humidity sensors development: A review

https://pubs.rsc.org/en/content/articlepdf/2017/cc/c6cc06475b

Haiyan He

Papers

Nanosized Rh grown on single-walled carbon nanohorns for efficient methanol oxidation reaction

Preparation of Bi2S3 thin films with a nanoleaf structure by electrodeposition method

Efficient interface-induced effect of novel reduced graphene oxide-CoS heteronanostructures in enhancing photocatalytic acitivities

Photoinduced superhydrophilicity and high photocatalytic activity of ZnO–reduced graphene oxide nanocomposite films for self-cleaning applications

Synthesis and photocatalytic property of N-doped TiO2 nanorods and nanotubes with high nitrogen content