Strong Formulation Finite Element Method Based on Differential Quadrature: A Survey

formulas for natural frequency and mode shape is available in our book collection an online access to it is set as public so you can get it instantly. Our book servers hosts in multiple countries, allowing you to get the most less latency time to download any of our books like this one. Kindly say, the formulas for natural frequency and mode shape is universally compatible with any devices to read.

Formulas For Natural Frequency And Mode Shape

On the free vibration analysis of laminated composite and sandwich plates: A review of recent literature with some numerical results

In this study, free vibration analysis of conical and cylindrical shells and annular plates made of composite laminated and functionally graded materials (FGMs) is investigated. Carbon nanotubes reinforced (CNTR) composite case is also taken consideration for FGM. The equations of motion for conical shell are obtained via Hamilton's principle using the transverse shear deformation theory. To obtain the eigenvalue problem of the system, the method of discrete singular convolution is employed. Material properties are graded in the thickness direction according to a volume fraction power law and four-parameter power law indexes for FGM cases. Five types of distributions of CNTR material are also considered. To verify the accuracy of this method, comparisons of the present results are made with results available in the open literature. Free vibrations of cylindrical shells and annular plates with FGM are treated as special cases. Results are also presented for carbon nanotubes reinforced (CNTR) composite cylindrical shells and annular plates. It is found that the convergence and accuracy of the present DSC method is very good for vibration problem of shells with functionally graded materials (FMG) and CNTR functionally graded materials.

Free vibration of carbon nanotubes reinforced (CNTR) and functionally graded shells and plates based on FSDT via discrete singular convolution method

The free vibration analysis of a circular plate made up of a porous material integrated by piezoelectric actuator patches has been studied. The plate is assumed to be thin and its shear deformations have been neglected. The porous material properties vary through the plate thickness according to some given functions. Using Hamilton's variational principle and the classical plate theory (CPT) the governing motion equations have been obtained. Simple and clamped supports have been considered for the boundary conditions. The differential quadrature method (DQM) has been used for the discretizations required for numerical analysis. The effect of some parameters such as thickness ratio, porosity, piezoelectric actuators, variation of piezoelectric actuators-to-porous plate thickness ratio, pores distribution and pores compressibility on the natural frequency, radial and circumferential stresses has been illustrated. The results have been compared with the similar ones in the literature.

Free vibration analysis of saturated porous FG circular plates integrated with piezoelectric actuators via differential quadrature method

In this study, free vibration of laminated skew plates was investigated. Discrete singular convolution (DSC) method is used for numerical solution of vibration problems. The straight-sided quadrilateral domain is mapped into a square domain in the computational space using a four-node element by using the geometric transformation. Typical results are presented for different geometric parameters and boundary conditions. It is concluded from the results that the skew angle have considerable influence on the variations of the frequencies with fibre orientation angle and number of layers in the laminate. The results obtained by DSC method are compared with those obtained by analytical and numerical approaches. It is shown that reasonable accurate results are obtained. Present work also indicates that the method of DSC is a promising and potential approach for computational mechanics. Copyright © 2009 John Wiley & Sons, Ltd.

Free vibration analysis of symmetric laminated skew plates by discrete singular convolution technique based on first‐order shear deformation theory

Frequencies of FGM shells and annular plates by the methods of discrete singular convolution and differential quadrature methods

A new eigenvalue problem solver for thermo‐mechanical vibration of Timoshenko nanobeams by an innovative nonlocal finite element method

This paper presents the dynamic responses of a fiber-reinforced composite beam under a moving load. The Timoshenko beam theory was employed to analyze the kinematics of the composite beam. The constitutive equations for motion were obtained by utilizing the Lagrange procedure. The Ritz method with polynomial functions was employed to solve the resulting equations in conjunction with the Newmark average acceleration method (NAAM). The influence of fiber orientation angle, volume fraction, and velocity of the moving load on the dynamic responses of the fiber-reinforced nonhomogeneous beam is presented and discussed.

https://www.mdpi.com/2227-7390/9/9/1048/pdf

Dynamic Analysis of a Fiber-Reinforced Composite Beam under a Moving Load by the Ritz Method

In the current article, in the presence of thermal and diffusion processes, the equations governing elastic materials through thermodiffusion are obtained. The Moore–Gibson–Thompson (MGT) equation modifies and defines the equations for thermal conduction and mass diffusion that occur in solids. This modification is based on adding heat and diffusion relaxation times in the Green–Naghdi Type III (GN-III) models. In an unbounded medium with a cylindrical hole, the built model has been applied to examine the influence of the coupling between temperature and mass diffusion and responses. At constant concentration as well as intermittent and decaying varying heat, the surrounding cavity surface is traction-free and is filled slowly. Laplace transform and Laplace inversion techniques are applied to obtain the solutions of the studied field variables. In order to explore thermal diffusion analysis and find closed solutions, a suitable numerical approximation technique has been used. Comparisons are made between the results obtained with the results of the corresponding previous models. Additionally, to explain and realize the presented model, tables and figures for various physical fields are presented.

Hakan Ersoy

Papers

Free vibration analysis of symmetric laminated skew plates by discrete singular convolution technique based on first‐order shear deformation theory

Frequencies of FGM shells and annular plates by the methods of discrete singular convolution and differential quadrature methods

A new eigenvalue problem solver for thermo‐mechanical vibration of Timoshenko nanobeams by an innovative nonlocal finite element method

Dynamic Analysis of a Fiber-Reinforced Composite Beam under a Moving Load by the Ritz Method

Solution of Moore–Gibson–Thompson Equation of an Unbounded Medium with a Cylindrical Hole