A curable composition for producing a fluid permeable composite material comprising: a particulate material and a binding agent comprising: 25-40 % by weight of an acrylic polymer, 0.5-20 % by weight of 10-35 % by weight of a homopolymer of an isocyanate and corresponding isocyanate polymerising agent for forming a crosslinked polymer with said acrylic polymer, and 20-50 % by weight of n-butyl acetate. The composite material, having high breaking and flexural strengths, is suitable for use in making pavers, bricks, tiles and stormwater entry grates.

Fluid permeable composite material and process for same

A process for producing solid surface material is provided with a thin layer of filled polymer integrally formed with a backing of bubble-filled polymer, without an interface or transition zone in the polymer mix, using one-step casting, with vibration to aid separation of filler and bubbles.

Two-step process for producing solid surface material with foam backing

PURPOSE:To make any special circuit protecting element unnecessary, by a method wherein a discharging element is permitted to be employed for the protections of a power source circuit and a load commonly except the detection of overvoltage. CONSTITUTION:An AC input is rectified by a rectifying circuit constituted of diodes D1-D4, then, is smoothed by capacitors C1, C2 and is supplied to loads L1, L2 through a DC/DC converter. when a switch SW is opened, the rectifying circuit becomes a full wave rectifying circuit but it becomes a voltage multiplying rectifier when the switch is closed. The series connecting body of a resistor R and a discharge tube NL is connected between the terminals 3, 4 of the rectifying circuit. when the switch SW is closed by error or when the circuit is abnormal, the discharge tube NL is conducted and a current is conducted through the resistor R, therefore, a fuse F is blown to protect the title power source circuit and the loads.

Power source circuit

Water pervious elastic paving method

PURPOSE:To improve water permeability and gas permeability, by a method wherein an inorganic solid and a molded product made of epoxy resin are adhered to a block comprising an inorganic material having longitudinal perforation at the inside CONSTITUTION:A dry inorganic solid sizing 15-15mm and epoxy resin containing a hardener, which is enough to cover said solid surface, are mixed at higher than 10 degC, molded, and cured on a block 1 consisting of an inorganic material in an appropriate side shape comprising a flat, a concave, or a convex surface, and a molded body 2, having a side in the same shape as that of the block 1, is adhered thereto to form an interlocking block Moisture, passing through the molded body 2, is absorbed into earth after passage to the side on one side and through perforations 3 in the block on the other

Hisao Morimoto

Papers

Method of paving water permeability

Method of producing resin concrete molded article with patterns