Mes premiers remtrciements trout aux auteurs des 206 communications th6matiquts et notes de projet, sans qui ces actes n'auraient 6videmment pas vu le jour. / Is oat contribu6 h la qualit6 scientifique et ,5 I'hmuog6t~6it6 pr6sentationntlle de leurs articles en refondant les versions iuitiales soumises an comit6 de programme, ea acceptant de suivre les r~gles de pr6sentation indiqu6es, et en nous envoyant parrots plusieurs versions am61ior6es surun point ou sur l'autrc.

/pdf/about-these-proceedings-4s0qpzq930.pdf

About these proceedings

In response to the 2013 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) study was launched, as an international collaboration hosted by CERN. This study covers a highest-luminosity high-energy lepton collider (FCC-ee) and an energy-frontier hadron collider (FCC-hh), which could, successively, be installed in the same 100 km tunnel. The scientific capabilities of the integrated FCC programme would serve the worldwide community throughout the 21st century. The FCC study also investigates an LHC energy upgrade, using FCC-hh technology. This document constitutes the second volume of the FCC Conceptual Design Report, devoted to the electron-positron collider FCC-ee. After summarizing the physics discovery opportunities, it presents the accelerator design, performance reach, a staged operation scenario, the underlying technologies, civil engineering, technical infrastructure, and an implementation plan. FCC-ee can be built with today’s technology. Most of the FCC-ee infrastructure could be reused for FCC-hh. Combining concepts from past and present lepton colliders and adding a few novel elements, the FCC-ee design promises outstandingly high luminosity. This will make the FCC-ee a unique precision instrument to study the heaviest known particles (Z, W and H bosons and the top quark), offering great direct and indirect sensitivity to new physics.

/pdf/fcc-ee-the-lepton-collider-future-circular-collider-61xh2cg09w.pdf

FCC-ee: The Lepton Collider: Future Circular Collider Conceptual Design Report Volume 2

Particle physics has arrived at an important moment of its history. The discovery of the Higgs boson, with a mass of 125 GeV, completes the matrix of particles and interactions that has constituted the “Standard Model” for several decades. This model is a consistent and predictive theory, which has so far proven successful at describing all phenomena accessible to collider experiments. However, several experimental facts do require the extension of the Standard Model and explanations are needed for observations such as the abundance of matter over antimatter, the striking evidence for dark matter and the non-zero neutrino masses. Theoretical issues such as the hierarchy problem, and, more in general, the dynamical origin of the Higgs mechanism, do likewise point to the existence of physics beyond the Standard Model. This report contains the description of a novel research infrastructure based on a highest-energy hadron collider with a centre-of-mass collision energy of 100 TeV and an integrated luminosity of at least a factor of 5 larger than the HL-LHC. It will extend the current energy frontier by almost an order of magnitude. The mass reach for direct discovery will reach several tens of TeV, and allow, for example, to produce new particles whose existence could be indirectly exposed by precision measurements during the earlier preceding e+e– collider phase. This collider will also precisely measure the Higgs self-coupling and thoroughly explore the dynamics of electroweak symmetry breaking at the TeV scale, to elucidate the nature of the electroweak phase transition. WIMPs as thermal dark matter candidates will be discovered, or ruled out. As a single project, this particle collider infrastructure will serve the world-wide physics community for about 25 years and, in combination with a lepton collider (see FCC conceptual design report volume 2), will provide a research tool until the end of the 21st century. Collision energies beyond 100 TeV can be considered when using high-temperature superconductors. The European Strategy for Particle Physics (ESPP) update 2013 stated “To stay at the forefront of particle physics, Europe needs to be in a position to propose an ambitious post-LHC accelerator project at CERN by the time of the next Strategy update”. The FCC study has implemented the ESPP recommendation by developing a long-term vision for an “accelerator project in a global context”. This document describes the detailed design and preparation of a construction project for a post-LHC circular energy frontier collider “in collaboration with national institutes, laboratories and universities worldwide”, and enhanced by a strong participation of industrial partners. Now, a coordinated preparation effort can be based on a core of an ever-growing consortium of already more than 135 institutes worldwide. The technology for constructing a high-energy circular hadron collider can be brought to the technology readiness level required for constructing within the coming ten years through a focused R&D programme. The FCC-hh concept comprises in the baseline scenario a power-saving, low-temperature superconducting magnet system based on an evolution of the Nb3Sn technology pioneered at the HL-LHC, an energy-efficient cryogenic refrigeration infrastructure based on a neon-helium (Nelium) light gas mixture, a high-reliability and low loss cryogen distribution infrastructure based on Invar, high-power distributed beam transfer using superconducting elements and local magnet energy recovery and re-use technologies that are already gradually introduced at other CERN accelerators. On a longer timescale, high-temperature superconductors can be developed together with industrial partners to achieve an even more energy efficient particle collider or to reach even higher collision energies.The re-use of the LHC and its injector chain, which also serve for a concurrently running physics programme, is an essential lever to come to an overall sustainable research infrastructure at the energy frontier. Strategic R&D for FCC-hh aims at minimising construction cost and energy consumption, while maximising the socio-economic impact. It will mitigate technology-related risks and ensure that industry can benefit from an acceptable utility. Concerning the implementation, a preparatory phase of about eight years is both necessary and adequate to establish the project governance and organisation structures, to build the international machine and experiment consortia, to develop a territorial implantation plan in agreement with the host-states’ requirements, to optimise the disposal of land and underground volumes, and to prepare the civil engineering project. Such a large-scale, international fundamental research infrastructure, tightly involving industrial partners and providing training at all education levels, will be a strong motor of economic and societal development in all participating nations. The FCC study has implemented a set of actions towards a coherent vision for the world-wide high-energy and particle physics community, providing a collaborative framework for topically complementary and geographically well-balanced contributions. This conceptual design report lays the foundation for a subsequent infrastructure preparatory and technical design phase.

/pdf/fcc-hh-the-hadron-collider-3zjqrxf0o5.pdf

FCC-hh: The Hadron Collider

A new local field quantity is presented which gives the high gradient performance limit of accelerating structures due to vacuum rf breakdown. The new field quantity, a modified Poynting vector ${S}_{c}$, is derived from a model of the breakdown trigger in which field emission currents from potential breakdown sites cause local pulsed heating. The field quantity ${S}_{c}$ takes into account both active and reactive power flow on the structure surface. This new quantity has been evaluated for many X-band and 30 GHz rf tests, both traveling wave and standing wave, and the value of ${S}_{c}$ achieved in the experiments agrees well with analytical estimates.

/pdf/new-local-field-quantity-describing-the-high-gradient-limit-3hyoz4vsgu.pdf

New local field quantity describing the high gradient limit of accelerating structures

In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre-of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries.

/pdf/he-lhc-the-high-energy-large-hadron-collider-future-circular-rhfa1n24n3.pdf

HE-LHC : The High-Energy Large Hadron Collider Future Circular Collider Conceptual Design Report Volume 4

The increase in efficiency of RF power generation for future large accelerators is considered a high priority issue. The vast majority of the existing commercial high-power RF klystrons operates in the electronic efficiency range between 40% and 55%. Only a few klystrons available on the market are capable of operating with 65% efficiency or above. In this paper, a new method to achieve 90% RF power conversion efficiency in a klystron amplifier is presented. The essential part of this method is a new bunching technique—bunching with bunch core oscillations. Computer simulations confirm that the RF production efficiency above 90% can be reached with this new bunching method. The results of a preliminary study of an $L$ -band, 20-MW peak RF power multibeam klystron for Compact Linear Collider with the efficiency above 85% are presented.

Toward High-Power Klystrons With RF Power Conversion Efficiency on the Order of 90%

The High Efficiency International Klystron Activity (HEIKA) was initiated at CERN in 2014 to evaluate and develop new klystron bunching technologies for high-efficiency klystrons in application to the large-scale scientific projects such as the Compact Linear Collider (CLIC) and the Future Circular Collider (FCC). The success of such development strongly depends on the availability of the specialized klystron computer codes. Unfortunately, the accurate and efficient 2-D large-signal codes are proprietary and are not freely available to the wide klystron community. The new 1.5-D klystron code called KlyC has been developed as an attempt to bridge the gap between fast, but approximate 1-D models and time/resources consuming particle-in-cell (PIC) codes. KlyC simulates the specific physical processes such as the current emission from the metal surface, the space charge depression along the klystron, and the residual RF current modulation of the spent beam. KlyC internal eigenmode solver allows fast simulations of the 2-D complex electromagnetic (EM) field in the axis-symmetrical cavity with the arbitrary cavity profile. The internal KlyC optimizer module can help the designer to speed up the klystron development process. In this paper, the theoretical model, general review of the code performance, and benchmarking between KlyC, AJDisk/1-D, PIC code MAGIC/2-D, and CST/3-D are presented using FCC klystrons as an example.

KlyC: 1.5-D Large-Signal Simulation Code for Klystrons

The RF power production efficiency is one of the major concerns in the 3-TeV Compact Linear Collider (CLIC) Drive Beam Accelerator, as it is responsible for almost 50% of the entire accelerator complex power consumption. The klystron technology with dc post acceleration of the prebunched beam was reconsidered recently, as an attempt to develop a technological solution for the high efficiency, high power ${L}$ -band multibeam klystrons (MBKs). In this article, the modeling and design study of the CLIC MBK with two-stage (TS) configuration is presented. The CLIC TS MBK performance validation has been done using the sophisticated 3-D particle-in-cell computer simulations of the entire device.

Modeling and Technical Design Study of Two-Stage Multibeam Klystron for CLIC

We present the design, construction and high-power test of an X-band radio-frequency accelerating structure, built as a prototype for the CERN LInear Collider (CLIC) study. X-band structures have been attracting increasing attention in recent years with applications foreseen in the domains of compact free electron lasers, medical accelerators and as diagnostics for ultra-short (femtosecond) electron bunches (when used in deflecting mode). To date, the main motivation for developments in this field has been as accelerating structures for linear colliders such as CLIC. In the context of a CERN/PSI collaboration we have built a prototype structure based on an existing CERN design, but with some modification, and following, as closely as possible, the realization and vacuum brazing techniques employed in the production of the Cband structures for the Swiss Free Electron Laser, SwissFEL. We will present the basic design of the structure and describe the fabrication process. The results of high power conditioning of the structure at CERN on an X-box test stand, to assess conditioning times, accelerating field and measure breakdown rates, will also be presented.

https://cds.cern.ch/record/2289650/files/thpik097.pdf

High Power Tests of a Prototype X-Band Accelerating Structure for CLIC

In CLIC, the rf power to accelerate the main beam is produced by decelerating a drive beam. The Test Beam Line (TBL) of the CLIC Test Facility (CTF3) is designed to study and validate the drive beam stability during deceleration. This is one of the R&D items required from the International Linear Collider Technical Review Committee to demonstrate feasibility of CLIC. It will produce 30 GHz rf power in the GW range and allow to benchmark computer codes used for the CLIC decelerator design. Different options of this experimental beam line are discussed.

/pdf/progress-on-the-ctf3-test-beam-line-4t98ilsfsd.pdf

Igor Syratchev

Papers

Toward High-Power Klystrons With RF Power Conversion Efficiency on the Order of 90%

KlyC: 1.5-D Large-Signal Simulation Code for Klystrons

Modeling and Technical Design Study of Two-Stage Multibeam Klystron for CLIC

High Power Tests of a Prototype X-Band Accelerating Structure for CLIC

Progress on the CTF3 Test Beam Line