The microtextures in a friction-stir-welded magnesium (Mg) alloy, AZ61, with a nugget-shaped stir zone were analyzed by orientation imaging microscopy (OIM). The base material had a (0002) 〈uvi0〉 texture ((0002) parallel to the sheet plane, 〈uvi0〉 parallel to the welding direction). Friction stir welding produced texture components different from those of the base material in the stir zone. Except for the upper surface of the plate, most of the stir zone had a texture with a strong tendency for the (0002) basal plane to align with the surface of the hard pin of the welding tool. Formation of this texture component was attributable to shear deformation arising from the rotation of the hard pin. The (0002) planes tended to align with an ellipsoidal surface in the nugget-shaped stir zone. The present study suggests that the nugget shape, which is a characteristic feature of the stir zone, is strongly related to formation of the ellipsoidal surface described by the (0002) basal plane.

Basal plane texture and flow pattern in friction stir weld of a magnesium alloy

The influence of pin geometry on bonding and mechanical properties in friction stir weld 2014 Al alloy

Dissimilar friction stir welding between magnesium and aluminum alloys

Friction stir process as a new manufacturing technique of ultrafine grained aluminum alloy

The objective of this article is to provide a review of friction stir processing (FSP) technology and its application for microstructure modification of particle reinforced composite materials. The main focus of FSP was on aluminum based alloys and composites. Recently, many researchers have investigated this technology for treating other alloys and materials including stainless steels, magnesium, titanium, and copper. It is shown that FSP technology is very effective in microstructure modification of reinforced metal matrix composite materials. FSP has also been used in the processing and structure modification of polymeric composite materials. Compared with other manufacturing processes, friction stir processing has the advantage of reducing distortion and defects in materials. The layout of this paper is as follows. The friction stir processing technology will be presented first. Then, the application of this technology in manufacturing and structure modification of particle reinforced composite materials will be introduced. Future application of friction stir processing in energy field, for example, for vanadium alloy and composites will be discussed. Finally, the challenges for improving friction stir processing technology will be mentioned.

/pdf/friction-stir-processing-of-particle-reinforced-composite-45o98njx7p.pdf

J.D Russell

Papers

Advanced welding processes for fusion reactor fabrication