Semiconductor nanowires represent an important class of nanostructure building block for photovoltaics as well as direct solar-to-fuel application because of their high surface area, tunable bandgap and efficient charge transport and collection. In this talk, I will highlight several recent examples in this lab using semiconductor nanowires and their heterostructures for the purpose of solar energy harvesting. In addition, we have also discovered that the thermoconductivity of the silicon nanowires can be significantly reduced due to phonon scattering, pointing to a very promising approach to design better thermoelectrical materials. It is important to note that the engines that generate most of the world's power typically operate at only 30–40 per cent efficiency, releasing roughly 15 terawatts of heat to the environment. If this “wasted heat” could be recycled, the impact globally would be enormous. Our silicon nanowire thermoelectric technology could have a significant impact in alternative energy generation.

Semiconductor nanowires for energy conversion.

One-dimensional (1D) ZnO nanostructures have been studied intensively and extensively over the last decade not only for their remarkable chemical and physical properties, but also for their current and future diverse technological applications. This article gives a comprehensive overview of the progress that has been made within the context of 1D ZnO nanostructures synthesized via wet chemical methods. We will cover the synthetic methodologies and corresponding growth mechanisms, different structures, doping and alloying, position-controlled growth on substrates, and finally, their functional properties as catalysts, hydrophobic surfaces, sensors, and in nanoelectronic, optical, optoelectronic, and energy harvesting devices.

/pdf/one-dimensional-zno-nanostructures-solution-growth-and-30xs4d6be7.pdf

One-dimensional ZnO nanostructures: Solution growth and functional properties

CONTENTS 1. Introduction 1.1. Fundamental Theory of Surface-Enhanced Raman Scattering 1.2. Optical Properties of SERS Tags 2. Synthesis of SERS Tags 2.1. Noble Metal Nanosubstrates 2.1.1. Single Particle-Based SERS Substrates 2.1.2. Nanoparticle Cluster-Based Substrates 2.2. Raman Reporter Molecules 2.2.1. Selection Principles and Reporter Types 2.2.2. Self-Assembled Monolayer Coverage Strategy 2.3. Surface Coating for Protection 2.3.1. Biomolecule Coating 2.3.2. Polymer Coating 2.3.3. Liposome Coating 2.3.4. Silica Coating 2.4. Attachment of Targeting Molecules 3. Bioanalysis Applications 3.1. Ionic and Molecular Detection 3.2. Pathogen Detection 3.3. Live-Cell Imaging 3.3.1. Cancer Marker Detection 3.3.2. Intercellular Microenvironment Sensing 3.4. Tissue SERS Imaging 3.5. In Vivo SERS Imaging 4. Challenges and Perspectives 4.1. Reproducible Signal of SERS Tags 4.1.1. Precisely Controlled Hot Spots for Nanosubstrates 4.1.2. Calibration of SERS Intensities and Enhancements 4.2. Improving Multiplexing Capability 4.3. Reduced Size for Subcellular Imaging 4.4. Development of Multifunctional Nanoplatforms 4.4.1. Magnetic SERS Dots 4.4.2. Multimodal Imaging Dots 4.4.3. SERS Tag-Based Therapeutic Systems 4.5. Biocompatibility 5. Conclusions and Remarks

SERS Tags: Novel Optical Nanoprobes for Bioanalysis

We report the rational synthesis of nitrogen-doped zinc oxide (ZnO:N) nanowire arrays, and their implementation as photoanodes in photoelectrochemical (PEC) cells for hydrogen generation from water splitting. Dense and vertically aligned ZnO nanowires were first prepared from a hydrothermal method, followed by annealing in ammonia to incorporate N as a dopant. Nanowires with a controlled N concentration (atomic ratio of N to Zn) up to ∼4% were prepared by varying the annealing time. X-ray photoelectron spectroscopy studies confirm N substitution at O sites in ZnO nanowires up to ∼4%. Incident-photon-to-current-efficiency measurements carried out on PEC cell with ZnO:N nanowire arrays as photoanodes demonstrate a significant increase of photoresponse in the visible region compared to undoped ZnO nanowires prepared at similar conditions. Mott−Schottky measurements on a representative 3.7% ZnO:N sample give a flat-band potential of −0.58 V, a carrier density of ∼4.6 × 1018 cm−3, and a space-charge layer of ∼...

Nitrogen-Doped ZnO Nanowire Arrays for Photoelectrochemical Water Splitting

We review the application of impedance spectroscopy in dye-sensitized solar cells, quantum dot-sensitized solar cells and organic bulk heterojunction solar cells. We emphasize the interpretation of the impedance parameters for determining the internal features of the device, concerning the carrier distribution, materials properties such as the density of states and/or doping of the semiconductors, and the match of energy levels for photoinduced charge generation and separation. Another central task is the determination of recombination mechanisms from the measured resistances, and the factors governing the device performance by combined analysis of resistances as a function of voltage and current–voltage curves.

Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy

The carrier density of ZnO nanowires has been determined by means of electrochemical impedance spectroscopy. A model taking into account the geometry of ZnO nanowires has been developed and the differences with the standard flat model, as curved Mott-Schottky plots, are discussed. The as-grown electrodeposited samples present a high donor density of 6.2×1019cm−3, dramatically reduced by two orders of magnitude after an annealing in air at 450°C during 1h. The results show that the surface of the ZnO nanowires is active; therefore this system appears as a useful structure to support a functionalized nanostructured devices.

Determination of carrier density of ZnO nanowires by electrochemical techniques

A systematic study of the role of KCl on the electrodeposition of ZnO nanowire arrays from the reduction of oxygen in ZnCl2 solutions was performed. Besides its role as a supporting electrolyte, other major effects were found. An increase of KCl concentration ([KCl]) considerably decreased the rate of O2 reduction. The consequent decrease in OH- production rate resulted in an augmentation of the ZnO deposition efficiency, from a value around 3% for [KCl] = 5 × 10-2 M to more than 40% for [KCl] = 3.4 M. The increase of the deposition efficiency mainly resulted in an enhancement of the longitudinal growth rate. However, high [KCl] (>1 M) also favored the lateral growth of the ZnO nanowires, resulting in diameters as big as 300 nm (in comparison to the diameter of 80 nm obtained for [KCl] < 1 M). The observed effects were discussed in terms of Cl- ion adsorption on the cathode surface. The possible preferential adsorption of the anion on the (0001) ZnO surface was emphasized. Transmission electron microscopy...

Role of Chloride Ions on Electrochemical Deposition of ZnO Nanowire Arrays from O2 Reduction

An innovative route is presented to obtain arrays of single-crystal ZnO nanotubes with tailored dimensions. The three-step process combines electrochemical and chemical approaches. The first step consists in the electrodeposition of ZnO nanowire arrays from the O2 reduction in an aqueous solution of zinc chloride (ZnCl2) and potassium chloride (KCl). In the second step the core of ZnO nanowires is selectively etched in a KCl solution, resulting in the formation of tubular structures. The influence of KCl concentration, temperature, and immersion time in the ZnO nanotube formation process is investigated, with the finding that the dissolution of the nanowire core occurs for [KCl] ≥ 1 M and the etching rate is enhanced with the temperature. Arrays of ZnO nanotubes with tailored dimensions (200−500 nm external diameter and 1−5 μm length) are obtained by varying the conditions of nanowire array deposition and taking into account the dimensions of the nanowires to adjust the dissolution time. A precise control...

Jamil Elias

Papers

Determination of carrier density of ZnO nanowires by electrochemical techniques

Role of Chloride Ions on Electrochemical Deposition of ZnO Nanowire Arrays from O2 Reduction

Conversion of ZnO Nanowires into Nanotubes with Tailored Dimensions

Electrochemical deposition of ZnO nanowire arrays with tailored dimensions

Electrodeposition of ZnO nanowires with controlled dimensions for photovoltaic applications : Role of buffer layer