Showing papers by "Jason Glenn published in 1998"
TL;DR: Bolocam as mentioned in this paper, a bolometric camera for millimeter-wave observations at the Caltech Submillimeter Observatory, has 144 diffraction-limited detectors operating at 300 mK, an 8 arcminute field of view, and a sky noise limited NEFD of approximately 35 mJy Hz-1/2 per pixel at (lambda) equals 1.4 mm.
Abstract: We describe the design of Bolocam, a bolometric camera for millimeter-wave observations at the Caltech Submillimeter Observatory. Bolocam will have 144 diffraction-limited detectors operating at 300 mK, an 8 arcminute field of view, and a sky noise limited NEFD of approximately 35 mJy Hz-1/2 per pixel at (lambda) equals 1.4 mm. Observations will be possible at one of (lambda) equals 1.1., 1.4, or 2.1 mm per observing run. The detector array consists of sensitive NTD Ge thermistors bonded to silicon nitride micromesh absorbers patterned on a single wafer of silicon. This is a new technology in millimeter-wave detector array construction. To increase detector packing density, the feed horns will be spaced by 1.26 f(lambda) (at (lambda) equals 1.4 mm), rather than the conventional 2 f(lambda) . DC stable read out electronics will enable on-the-fly mapping and drift scanning. We will use Bolocam to map Galactic dust emission, to search for protogalaxies, and to observe the Sunyaev- Zel'dovich effect toward galaxy clusters.
104 citations
TL;DR: In this paper, the authors developed arrays of bolometers based on silicon nitride micromesh absorbers for the Spectral & Photometric Imaging Receiver (SPIRE) on the Far Infra-Red and Submillimeter Space Telescope (FIRST).
Abstract: We are developing arrays of bolometers based on silicon nitride micromesh absorbers for the Spectral & Photometric Imaging Receiver (SPIRE) on the Far Infra-Red and Submillimeter Space Telescope (FIRST). The bolometers are coupled to a close-packed array of 1 f(lambda) feedhorns which views the primary mirror through a cooled aperture stop. Feedhorn-coupled bolometers minimize the detector area and throughput and have good optical efficiency. A 1 f(lambda) feedhorn array provides, higher mapping speed than a 2 f(lambda) feedhorn array and reduces the number of jitters required to produce a fully sampled map, but at the cost of more detectors. Individual silicon nitride micromesh bolometers are already able to meet the performance requirements of SPIRE. In parallel we are developing transition-edge detectors read out by SQUID current amplifier. The relatively large cooling power available at 300 mK enables the array to be coupled to a cold SQUID multiplexer, creating a monolithic fully multiplexed array and making large format arrays possible for SPIRE.
60 citations