In this paper we summarize the hardware and software issues of impedance-based structural health moni- toring based on piezoelectric materials. The basic concept of the method is to use high-frequency structural excitations to monitor the local area of a structure for changes in structural impedance that would indicate imminent damage. A brief overview of research work on experimental and theoretical stud- ies on various structures is considered and several research papers on these topics are cited. This paper concludes with a discussion of future research areas and path forward. Piezoelectric materials acting in the "direct" manner pro- duce an electrical charge when stressed mechanically. Con- versely, a mechanical strain is produced when an electrical field is applied. The direct piezoelectric effect has often been used in sensors such as piezoelectric accelerometers. With the converse effect, piezoelectric materials apply local- ized strains and directly influence the dynamic response of the structural elements when either embedded or surface bonded into a structure. Piezoelectric materials have been widely used in structural dynamics applications because they are lightweight, robust, inexpensive, and come in a variety of forms ranging from thin rectangular patches to complex shapes being used in microelectromechanical systems (MEMS) fabrications. The applications of piezoelectric mate- rials in structural dynamics are too numerous to mention and are detailed in the literature (Niezrecki et al., 2001; Chopra, 2002). The purpose of this paper is to explore the importance and effectiveness of impedance-based structural health mon- itoring from both hardware and software standpoints. Imped- ance-based structural health monitoring techniques have been developed as a promising tool for real-time structural dam- age assessment, and are considered as a new non-destructive evaluation (NDE) method. A key aspect of impedance-based structural health monitoring is the use of piezoceramic (PZT) materials as collocated sensors and actuators. The basis of this active sensing technology is the energy transfer between the actuator and its host mechanical system. It has been shown that the electrical impedance of the PZT material can be directly related to the mechanical impedance of a host structural component where the PZT patch is attached. Uti- lizing the same material for both actuation and sensing not only reduces the number of sensors and actuators, but also reduces the electrical wiring and associated hardware. Fur- thermore, the size and weight of the PZT patch are negligible compared to those of the host structures so that its attach- ment to the structure introduces no impact on dynamic char- acteristics of the structure. A typical deployment of a PZT on a structure being monitored is shown in Figure 1. The first part of this paper (Sections 2 and 3) deals with the theoretical background and design considerations of the impedance-based structural health monitoring. The signal processing of the impedance method is outlined in Section 4. In Section 5, experimental studies using the impedance approaches are summarized and related previous works are listed. Section 6 presents a brief comparison of the imped- ance method with other NDE approaches and, finally, sev- eral future issues are outlined in Section 7. 2. Theoretical Background

Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward

HIS article presents an overview and assessment of the technology leading to the development of intelligent structures. Intelligent structures are those which incorporate actuators and sensors that are highly integrated into the structure and have structural functionality, as well as highly integrated control logic, signal conditioning, and power amplification electronics. Such actuating, sensing, and signal processing elements are incorporated into a structure for the purpose of influencing its states or characteristics, be they mechanical, thermal, optical, chemical, electrical, or magnetic. For example, a mechanically intelligent structure is capable of altering both its mechanical states (its position or velocity) or its mechanical characteristics (its stiffness or damping). An optically intelligent structure could, for example, change color to match its background.17 Definition of Intelligent Structures Intelligent structures are a subset of a much larger field of research, as shown in Fig. I.123 Those structures which have actuators distributed throughout are defined as adaptive or, alternatively, actuated. Classical examples of such mechanically adaptive structures are conventional aircraft wings with articulated leading- and trailing-edge control surfaces and robotic systems with articulated manipulators and end effectors. More advanced examples currently in research include highly articulated adaptive space cranes. Structures which have sensors distributed throughout are a subset referred to as sensory. These structures have sensors which might detect displacements, strains or other mechanical states or properties, electromagnetic states or properties, temperature or heat flow, or the presence or accumulation of damage. Applications of this technology might include damage detection in long life structures, or embedded or conformal RF antennas within a structure. The overlap structures which contain both actuators and sensors (implicitly linked by closed-loop control) are referred to as controlled structures. Any structure whose properties or states can be influenced by the presence of a closed-loop control system is included in this category. A subset of controlled structures are active structures, distinguished from controlled structures by highly distributed actuators which have structural functionality and are part of the load bearing system.

Intelligent structures for aerospace - A technology overview and assessment

Passive piezoelectric damping devices are studied. These devices, consisting of a piezoelectric element and a resonant shunt, are analogous to mechanical damped vibration ab sorbers. In the past, a...

Multimodal passive vibration suppression with piezoelectric materials and resonant shunts

A survey on hysteresis modeling, identification and control

Research on shunted piezoelectric transducers, performed mainly over the past decade, has generated new opportunities for control of vibration and damping in flexible structures. This is made possible by the strong electromechanical coupling associated with modern piezoelectric transducers. In vibration control applications, a piezoelectric transducer is bonded to, or embedded in a base structure. As the structure deforms, the piezoelectric element strains and converts a portion of the structural vibration energy into electrical energy. By shunting the piezoelectric transducer to an electrical impedance, a part of the induced electrical energy can be dissipated. Hence, the impedance acts as a means of extracting mechanical energy from the base structure. This paper reviews recent research related to the use of shunted piezoelectric elements for vibration damping and control. In particular, the paper presents an overview of the literature on piezoelectric shunt damping and discusses recent observations on the feedback nature of piezoelectric shunt damping systems.

/pdf/a-survey-of-recent-innovations-in-vibration-damping-and-2qxnhuyc54.pdf

A survey of recent innovations in vibration damping and control using shunted piezoelectric transducers

Issues related to modeling and implementation of a self-sensing piezoelectric actuator are investigated The necessary formulation for modeling the simultaneous sensing and actuation phenomenon is provided Open and closed loop experiments performed on a cantilevered beam test specimen are described The sensitivity of the results to representative errors introduced in the implementation of the transducer is demonstrated analytically and experimentally The self-sensing actuator is also implemented using an active piezoelectric strut in a truss structure

Self-sensing piezoelectric actuation - Analysis and application to controlled structures

Issues related to modeling and implementation of a self-sensing piezoelectric actuator are investigated. The necessary formulation for modeling the simultaneous sensing and actuation phenomenon is provided. Open and closed loop experiments performed on a cantilevered beam test specimen are described. The sensitivity of the results to representative errors introduced in the implementation of the transducer is demonstrated analytically and experimentally. The self-sensing actuator is also implemented using an active piezoelectric strut in a truss structure.

Jay M. Goodliffe

Papers

Self-sensing piezoelectric actuation - Analysis and application to controlled structures

Self-sensing piezoelectric actuation - Analysis and application to controlled structures