The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

http://ieeexplore.ieee.org/iel5/6354/16969/00781867.pdf

Photonic crystals

In this article we review state-of-the-art concepts of space mapping and place them con- textually into the history of design optimization and modeling of microwave circuits. We formulate a generic space-mapping optimization algorithm, explain it step-by-step using a simple microstrip filter example, and then demonstrate its robustness through the fast design of an interdigital filter. Selected topics of space mapping are discussed, including implicit space mapping, gradient-based space mapping, the optimal choice of surrogate model, and tuning space mapping. We consider the application of space mapping to the modeling of microwave structures. We also discuss a software package for automated space-mapping optimization that involves both electromagnetic (EM) and circuit simulators.

Space mapping

A compact microstrip-line ultra-wideband (UWB) bandpass filter (BPF) using the proposed stub-loaded multiple-mode resonator (MMR) is presented. This MMR is formed by loading three open-ended stubs in shunt to a simple stepped-impedance resonator in center and two symmetrical locations, respectively. By properly adjusting the lengths of these stubs, the first four resonant modes of this MMR can be evenly allocated within the 3.1-to-10.6 GHz UWB band while the fifth resonant frequency is raised above 15.0GHz. It results in the formulation of a novel UWB BPF with compact-size and widened upper-stopband by incorporating this MMR with two interdigital parallel-coupled feed lines. Simulated and measured results are found in good agreement with each other, showing improved UWB bandpass behaviors with the insertion loss lower than 0.8dB, return loss higher than 14.3dB, and maximum group delay variation less than 0.64ns in the realized UWB passband

Compact UWB Bandpass Filter Using Stub-Loaded Multiple-Mode Resonator

In this paper, synthesis and design techniques of dual- and triple-passband filters with Chebyshev and quasi-elliptic symmetric frequency responses are proposed and demonstrated for the first time on the basis of substrate integrated waveguide technology. The inverter coupled resonator section is first investigated, and then a dual-passband Chebyshev filter, a triple-passband Chebyshev filter, and a dual-passband quasi-elliptic filter, which consist of the inverter coupled resonator sections, are synthesized from the generalized low-pass prototypes having Chebyshev or quasi-elliptic responses, respectively. Subsequently, theses filters with a symmetric response are designed and implemented using the substrate integrated waveguide scheme over the -band frequency range. The inverter coupled resonator sections composed of side-by-side horizontally oriented substrate integrated waveguide cavities are coupled, in turn, by post-wall irises. 50-Omega microstrip lines are used to directly excite the filters. Measured results are presented and compared to those simulated by Ansoft's High Frequency Structure Simulator (HFSS) software package. A good agreement between the simulated and measured results is observed, which has also validated the proposed concept of design and synthesis with the substrate integration technology.

Dual-Band and Triple-Band Substrate Integrated Waveguide Filters With Chebyshev and Quasi-Elliptic Responses

This paper presents a comprehensive critical overview of fundamental and practical aspects of the modern stripline broadband ferromagnetic resonance (BFMR) spectroscopy largely employed for the characterisation of magnetic low-dimensional systems, such as thin ferro- and ferromagnetic, multiferroic and half-metallic films, multi-layers and nanostructures. These planar materials form the platform of the nascent fields of magnonics and spintronics. Experimental and theoretical results of research on these materials are summarised, along with systematic description of various phenomena associated with the peculiarities of the stripline BFMR, such as the geometry of stripline transducers, the orientation of the static magnetic field, the presence of microwave eddy currents, and the impacts of non-magnetic layers, interfaces and surfaces in the samples. Results from 240 articles, textbooks and technical reports are presented and many practical examples are discussed in detail. This review will be of interest to both general physical audience and specialists conducting research on various aspects of magnetisation dynamics and nanomagnetism.

/pdf/broadband-stripline-ferromagnetic-resonance-spectroscopy-of-1at9ae3yp6.pdf

Broadband stripline ferromagnetic resonance spectroscopy of ferromagnetic films, multilayers and nanostructures

We report on a new topology of coupling between substrate integrated circular cavities designed to produce particular filtering functions through combination with the classical iris-based coupling. This coupling is achieved by a grounded coplanar line etched at the top of cavities. This topology was used to realize a Ku-Band third-order filter, whose synthesis, electromagnetic simulation with HFSS, and experimental performances are presented here.

Design of a Substrate Integrated Waveguide (SIW) Filter Using a Novel Topology of Coupling

The two topologies and associated syntheses described here are dedicated to the design of capacitive-coupled dual-behavior resonator filters. The technique is based on the coupling of adjacent dual-behavior resonators (DBRs). The aim is to control the spurious resonances associated to classical DBR filters. In the first coupling technique, the inverter is replaced with an equivalent scheme composed of a set of three capacitors, i.e., a positive capacitor associated with two negative ones in parallel on both sides. The second technique relies on the same principle, but two equivalent schemes are moved along each stub of the resonators; the capacitance is then calculated by considering the position of the coupling effect on the stub and the value of the inverter. In both cases the synthesis is totally defined. In order to validate this concept, capacitive-coupled DBR filters and classical filters were designed on alumina substrate so as to compare simulation and experimental data

Synthesis of capacitive-coupled dual-behavior resonator (CCDBR) filters

This paper proposes several topologies of filters based on Substrate Integrated Circular Cavities (SICCs). SICC works on TM modes and the benefits of this technology are mainly an increased quality factor and a better design flexibility. Filters are made from cylindrical cavities integrated into a planar substrate and are fed by microstrip lines through coupling slots. Cavities are inter-coupled by irises. One-order, second-order and third-order filters are presented. Preliminary measurement data are compared to those from simulations performed with a 3-D electromagnetic structure simulator. These filters rely on the SICC concept, whose principle is explained hereafter.

Design of Ku-Band Filter based on Substrate-Integrated Circular Cavities (SICCs)

This paper deals with a rigorous synthesis of dual behavior resonator (DBR) filters with integrated low-pass filter for spurious response suppression. The basic low-pass filter consists in an L-C-L structure associating two transmission lines and an open-ended stub. After full definition, the synthesis is validated from comparisons between simulation- and experimental-data acquired with some third-order filters designed on alumina substrate

Synthesis of dual behavior resonator (DBR) filters with integrated low-pass structures for spurious responses suppression

This paper reports on the application of dual behavior resonators to design triband filters. The principle is briefly presented by considering monoband, dual-band and triband filters. A circuit is proposed by using an approximate synthesis. Then, a hybrid (electromagnetic / circuit) simulation is performed to take into account the parasitic effects induced by the junction discontinuities and to allow a fast triband optimization in the same time. An example of layout with associated simulated and experimental results is proposed.

Jean-François Favennec

Papers

Design of a Substrate Integrated Waveguide (SIW) Filter Using a Novel Topology of Coupling

Synthesis of capacitive-coupled dual-behavior resonator (CCDBR) filters

Design of Ku-Band Filter based on Substrate-Integrated Circular Cavities (SICCs)

Synthesis of dual behavior resonator (DBR) filters with integrated low-pass structures for spurious responses suppression

Planar tri-band filter based on dual behavior resonator (DBR)