Use of amphiphilic triblock copolymers to direct the organization of polymerizing silica species has resulted in the preparation of well-ordered hexagonal mesoporous silica structures (SBA-15) with uniform pore sizes up to approximately 300 angstroms. The SBA-15 materials are synthesized in acidic media to produce highly ordered, two-dimensional hexagonal (space group p6mm) silica-block copolymer mesophases. Calcination at 500°C gives porous structures with unusually large interlattice d spacings of 74.5 to 320 angstroms between the (100) planes, pore sizes from 46 to 300 angstroms, pore volume fractions up to 0.85, and silica wall thicknesses of 31 to 64 angstroms. SBA-15 can be readily prepared over a wide range of uniform pore sizes and pore wall thicknesses at low temperature (35° to 80°C), using a variety of poly(alkylene oxide) triblock copolymers and by the addition of cosolvent organic molecules. The block copolymer species can be recovered for reuse by solvent extraction with ethanol or removed by heating at 140°C for 3 hours, in both cases, yielding a product that is thermally stable in boiling water.

Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 angstrom pores

A family of highly ordered mesoporous (20−300 A) silica structures have been synthesized by the use of commercially available nonionic alkyl poly(ethylene oxide) (PEO) oligomeric surfactants and poly(alkylene oxide) block copolymers in acid media. Periodic arrangements of mescoscopically ordered pores with cubic Im3m, cubic Pm3m (or others), 3-d hexagonal (P63/mmc), 2-d hexagonal (p6mm), and lamellar (Lα) symmetries have been prepared. Under acidic conditions at room temperature, the nonionic oligomeric surfactants frequently form cubic or 3-d hexagonal mesoporous silica structures, while the nonionic triblock copolymers tend to form hexagonal (p6mm) mesoporous silica structures. A cubic mesoporous silica structure (SBA-11) with Pm3m diffraction symmetry has been synthesized in the presence of C16H33(OCH2CH2)10OH (C16EO10) surfactant species, while a 3-d hexagonal (P63/mmc) mesoporous silica structure (SBA-12) results when C18EO10 is used. Surfactants with short EO segments tend to form lamellar mesost...

Nonionic Triblock and Star Diblock Copolymer and Oligomeric Surfactant Syntheses of Highly Ordered, Hydrothermally Stable, Mesoporous Silica Structures

It is possible to say that zeolites are the most widely used catalysts in industry They are crystalline microporous materials which have become extremely successful as catalysts for oil refining, petrochemistry, and organic synthesis in the production of fine and speciality chemicals, particularly when dealing with molecules having kinetic diameters below 10 A The reason for their success in catalysis is related to the following specific features of these materials:1 (1) They have very high surface area and adsorption capacity (2) The adsorption properties of the zeolites can be controlled, and they can be varied from hydrophobic to hydrophilic type materials (3) Active sites, such as acid sites for instance, can be generated in the framework and their strength and concentration can be tailored for a particular application (4) The sizes of their channels and cavities are in the range typical for many molecules of interest (5-12 A), and the strong electric fields2 existing in those micropores together with an electronic confinement of the guest molecules3 are responsible for a preactivation of the reactants (5) Their intricate channel structure allows the zeolites to present different types of shape selectivity, ie, product, reactant, and transition state, which can be used to direct a given catalytic reaction toward the desired product avoiding undesired side reactions (6) All of these properties of zeolites, which are of paramount importance in catalysis and make them attractive choices for the types of processes listed above, are ultimately dependent on the thermal and hydrothermal stability of these materials In the case of zeolites, they can be activated to produce very stable materials not just resistant to heat and steam but also to chemical attacks Avelino Corma Canos was born in Moncofar, Spain, in 1951 He studied chemistry at the Universidad de Valencia (1967−1973) and received his PhD at the Universidad Complutense de Madrid in 1976 He became director of the Instituto de Tecnologia Quimica (UPV-CSIC) at the Universidad Politecnica de Valencia in 1990 His current research field is zeolites as catalysts, covering aspects of synthesis, characterization and reactivity in acid−base and redox catalysis A Corma has written about 250 articles on these subjects in international journals, three books, and a number of reviews and book chapters He is a member of the Editorial Board of Zeolites, Catalysis Review Science and Engineering, Catalysis Letters, Applied Catalysis, Journal of Molecular Catalysis, Research Trends, CaTTech, and Journal of the Chemical Society, Chemical Communications A Corma is coauthor of 20 patents, five of them being for commercial applications He has been awarded with the Dupont Award on new materials (1995), and the Spanish National Award “Leonardo Torres Quevedo” on Technology Research (1996) 2373 Chem Rev 1997, 97, 2373−2419

From Microporous to Mesoporous Molecular-Sieve Materials and Their Use in Catalysis

This critical review will be of interest to the experts in porous solids (including catalysis), but also solid state chemists and physicists. It presents the state-of-the-art on hybrid porous solids, their advantages, their new routes of synthesis, the structural concepts useful for their ‘design’, aiming at reaching very large pores. Their dynamic properties and the possibility of predicting their structure are described. The large tunability of the pore size leads to unprecedented properties and applications. They concern adsorption of species, storage and delivery and the physical properties of the dense phases. (323 references)

Hybrid porous solids: past, present, future

Materials with nanoscopic dimensions not only have potential technological applications in areas such as device technology and drug delivery but also are of fundamental interest in that the properties of a material can change in this regime of transition between the bulk and molecular scales. In this article, a relatively new method for preparing nanomaterials, membrane-based synthesis, is reviewed. This method entails synthesis of the desired material within the pores of a nanoporous membrane. Because the membranes used contain cylindrical pores of uniform diameter, monodisperse nanocylinders of the desired material, whose dimensions can be carefully controlled, are obtained. This "template" method has been used to prepare polymers, metals, semiconductors, and other materials on a nanoscopic scale.

https://science.sciencemag.org/content/sci/266/5193/1961.full.pdf

Nanomaterials: a membrane-based synthetic approach.

This invention relates to phase transfer catalysis (PTC) using a composition of synthetic ultra-large pore crystalline material which contains a cation of an onium compound, e.g. cetyltrimethylammonium, within the pores of said material. The crystalline material has, after calcination, an X-ray diffraction pattern with at least one peak at a d-spacing greater than 18 Angstrom Units and a benzene adsorption capacity of greater than 15 grams benzene per 100 grams of said material at 6.7 kPa (50 torr) and 25° C.

Phase-transfer catalysis with onium-containing synthetic mesoporous crystalline material

The M41S family of materials represent the first mesoporous molecular sieves. This new family of materials with high pore volumes and surface areas exhibits an array of structures that are thermally stable inorganic analogs of organic, lyotropic liquid crystalline phases. The ability of the surfactant/aluminosilicate intermediate to assemble into stable extended structures results in mesoporous materials that are structurally diverse exhibiting hexagonal, cubic, and lamellar phases. The materials can be prepared with narrow pore size distributions at pore sizes ranging from 15 to greater than 100 A, varied elemental compositions and variable surface properties. This variability in physical properties has resulted in catalytic and sorption separation applications.

A New Family of Mesoporous Molecular Sieves

There is provided a zeolite catalyst, which is first selectivated with a siliceous material and then treated with an aqueous solution comprising a dealuminizing agent such as an acid or a chelating agent.

Selectivated zeolite catalyst treated with a dealuminizing agent

There is provided a molecular sieve coated with a non-oxide ceramic. The molecular sieve may be a zeolite, such as ZSM-5, and the ceramic coating may be, e.g., boron nitride. The coated molecular sieve may be prepared by contacting the molecular sieve with a ceramic precursor material comprising a thermally decomposable material, such as polyborazylene, and thermally decomposing this thermally decomposable material. The coated molecular sieves may be used as organic conversion catalysts. The non-oxide ceramic coating may alter or enhance the shape-selective properties of the molecular sieve by providing a diffusion barrier to molecules.

Molecular sieves coated with non-oxide ceramics

There is provided a continuous toluene disproportionation process to selectively produce para-xylene. The process includes a steady-state of operation, wherein the conversion of toluene and selectivity to para-xylene is maintained at essentially constant target levels. Prior to such a steady-state of operation, the reaction is conducted under a relatively high temperature.

Jeffrey S. Beck

Papers

Phase-transfer catalysis with onium-containing synthetic mesoporous crystalline material

A New Family of Mesoporous Molecular Sieves

Selectivated zeolite catalyst treated with a dealuminizing agent

Molecular sieves coated with non-oxide ceramics

Continuous toluene disproportionation process