The application of ferroelectric materials (i.e. solids that exhibit spontaneous electric polarisation) in solar cells has a long and controversial history. This includes the first observations of the anomalous photovoltaic effect (APE) and the bulk photovoltaic effect (BPE). The recent successful application of inorganic and hybrid perovskite structured materials (e.g. BiFeO3, CsSnI3, CH3NH3PbI3) in solar cells emphasises that polar semiconductors can be used in conventional photovoltaic architectures. We review developments in this field, with a particular emphasis on the materials known to display the APE/BPE (e.g. ZnS, CdTe, SbSI), and the theoretical explanation. Critical analysis is complemented with first-principles calculation of the underlying electronic structure. In addition to discussing the implications of a ferroelectric absorber layer, and the solid state theory of polarisation (Berry phase analysis), design principles and opportunities for high-efficiency ferroelectric photovoltaics are presented.

/pdf/ferroelectric-materials-for-solar-energy-conversion-2y5gwkw07q.pdf

Ferroelectric Materials for Solar Energy Conversion: Photoferroics Revisited

Self-Powered Photodetectors Based on 2D Materials

Although there has been significant progress in the fabrication and performance optimization of one-dimensional nanostructure-based photodetectors, it is still a challenge to develop an effective and low-cost device with high performance characteristics, such as a high photocurrent/ dark-current ratio, photocurrent stability, and fast time response. Herein an efficient and low-cost method to achieve high-performance 'visible-blind' microscale ZnS nanobelt-based ultraviolet (UV)-light sensors without using a lithography technique, by increasing the nanobelt surface areas exposed to light, is reported. The devices exhibit about 750 times enhancement of a photocurrent compared with individual nanobelt-based sensors and an ultrafast time response. The photocurrent stability and time response to UV-light do not change significantly when a channel distance is altered from 2 to 100 μm or the sensor environment changes from air to vacuum and different measurement temperatures (60 and 150°C). The photoelectrical behaviors can be recovered well after returning the measurement conditions to air and room temperature again. The low cost and high performance of the resultant ZnS nanobelt photodetectors guarantee their highest potential for visible-blind UV-light sensors working in the UV-A band.

An Efficient Way to Assemble ZnS Nanobelts as Ultraviolet-Light Sensors with Enhanced Photocurrent and Stability

https://ddd.uab.cat/pub/artpub/2018/233375/36-Piezoelectrically_Enhanced_Photocatalysis_with.pdf

Piezoelectrically enhanced photocatalysis with BiFeO3 nanostructures for efficient water remediation

Piezoelectric materials are widely referred to as "smart" materials because they can transduce mechanical pressure acting on them to electrical signals and vice versa. They are extensively utilized in harvesting mechanical energy from vibrations, human motion, mechanical loads, etc., and converting them into electrical energy for low power devices. Piezoelectric transduction offers high scalability, simple device designs, and high-power densities compared to electro-magnetic/static and triboelectric transducers. This review aims to give a holistic overview of recent developments in piezoelectric nanostructured materials, polymers, polymer nanocomposites, and piezoelectric films for implementation in energy harvesting. The progress in fabrication techniques, morphology, piezoelectric properties, energy harvesting performance, and underpinning fundamental mechanisms for each class of materials, including polymer nanocomposites using conducting, non-conducting, and hybrid fillers are discussed. The emergent application horizon of piezoelectric energy harvesters particularly for wireless devices and self-powered sensors is highlighted, and the current challenges and future prospects are critically discussed.

Piezoelectric Materials for Energy Harvesting and Sensing Applications: Roadmap for Future Smart Materials

Ferroelectric materials can be utilized for fabricating photodetectors because of the photovoltaic effect. Enhancing the photovoltaic performance of ferroelectric materials is still a challenge. Here, a self-powered ultraviolet (UV) photodetector is designed based on the ferroelectric BiFeO3 (BFO) material, exhibiting a high current/voltage response to 365 nm light in heating/cooling states. The photovoltaic performance of the BFO-based device can be well modulated by applying different temperature variations, where the output current and voltage can be enhanced by 60 and 75% in heating and cooling states, respectively. The enhancement mechanism of the photocurrent is associated with both temperature effect and thermo-phototronic effect in the photovoltaic process. Moreover, a 4 × 4 matrix photodetector array has been designed for detecting the 365 nm light distribution in the cooling state by utilizing photovoltage signals. This study clarifies the role of the temperature effect and the thermo-phototroni...

Jia Qi

Papers

Enhanced Photocurrent in BiFeO3 Materials by Coupling Temperature and Thermo-Phototronic Effects for Self-Powered Ultraviolet Photodetector System.

Photovoltaic–Pyroelectric Coupled Effect Based Nanogenerators for Self-Powered Photodetector System

Optically Controlled Abnormal Photovoltaic Current Modulation with Temperature in BiFeO3