Additive manufacturing is a revolutionary technology that offers a different pathway for material processing and design. However, innovations in either new materials or new processing technologies ...

In situ design of advanced titanium alloy with concentration modulations by additive manufacturing.

Properties and applications of additively manufactured metallic cellular materials: A review

Defect formation is a critical challenge for powder-based metal additive manufacturing (AM). Current understanding on the three important issues including formation mechanism, influence and control method of metal AM defects should be updated. In this review paper, multi-scale defects in AMed metals and alloys are identified and for the first time classified into three categories, including geometry related, surface integrity related and microstructural defects. In particular, the microstructural defects are further divided into internal cracks and pores, textured columnar grains, compositional defects and dislocation cells. The root causes of the multi-scale defects are discussed. The key factors that affect the defect formation are identified and analyzed. The detection methods and modeling of the multi-scale defects are briefly introduced. The effects of the multi-scale defects on the mechanical properties especially for tensile properties and fatigue performance of AMed metallic components are reviewed. Various control and mitigation methods for the corresponding defects, include process parameter control, post processing, alloy design and hybrid AM techniques, are summarized and discussed. From research aspect, current research gaps and future prospects from three important aspects of the multi-scale AM defects are identified and delineated. 

Multi-scale defects in powder-based additively manufactured metals and alloys

ABSTRACT Laser powder bed fusion (LPBF) additive manufacturing has been advancing in the fabrication of metallic multi-material structures with intricate structures and refined material layouts. Herein, a comprehensive review of the recent achievements of multi-material structures via LPBF is provided in terms of interface characteristics and strengthening methods, critical technical issues and potential applications. It begins with the introduction of multi-material structures and the scope of the review. The interface characteristics (including representative multi-material types printed by LPBF, interfacial microstructure, defects, etc.) and strengthening methods of multi-material structures are then presented. Thereafter, the critical technical issues in LPBF for multi-material structures are discussed with regard to equipment development, data preparation, thermodynamic calculation and process simulation, and powder cross-contamination and recycling. Moreover, the potential applications (particularly in biomedical, electronic, aerospace) are illustrated and discussed. Finally, the outlook is outlined to provide guidance for future research.

Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion

Laser powder bed fusion (LPBF) is one of the major additive manufacturing techniques that industries have adopted to produce complex metal components. The scientific and industrial literature from the past few years reveals that there is a growing demand for the development of high-strength aluminium alloys for LPBF. However, some major challenges remain for high-strength aluminium alloys, especially in relation to printability and the control of defects. Possible strategies that have been identified to achieve high strength with printability include the adaptation of existing high-strength cast and wrought alloys to LPBF, the design of new alloys specifically for LPBF, and the development of aluminium-based composites to achieve unique combinations of properties and processability. Whilst review papers exist for aluminium alloys in general for the related work up to 2019, the purpose of this paper is to review the latest developments related to high-strength aluminium alloys for LPBF up to early 2022, including alloy and process design strategies to achieve high strength without cracking. It aims to provide fresh insights into the current state-of-the-art based on a review of extensive yield strength data for a wide spectrum of aluminium alloys and tempers that have been studied and/or commercialised for LPBF. 

Review of High-Strength Aluminium Alloys for Additive Manufacturing by Laser Powder Bed Fusion

BACKGROUNDMetallic components are the cornerstone of modern industries such as aviation, aerospace, automobile manufacturing, and energy production. The stringent requirements for high-performance metallic components impede the optimization of materials selection and manufacturing. Laser-based additive manufacturing (AM) is a key strategic technology for technological innovation and industrial sustainability. As the number of applications increases, so do the scientific and technological challenges. Because laser AM has domain-by-domain (e.g., point-by-point, line-by-line, and layer-by-layer) localized forming characteristics, the requisite for printing process and performance control encompasses more than six orders of magnitude, from the microstructure (nanometer- to micrometer-scale) to macroscale structure and performance of components (millimeter- to meter-scale). The traditional route of laser-metal AM follows a typical “series mode” from design to build, resulting in a cumbersome trial-and-error methodology that creates challenges for obtaining high-performance goals.ADVANCESWe propose a holistic concept of material-structure-performance integrated additive manufacturing (MSPI-AM) to cope with the extensive challenges of AM. We define MSPI-AM as a one-step AM production of an integral metallic component by integrating multimaterial layout and innovative structures, with an aim to proactively achieve the designed high performance and multifunctionality. Driven by the performance or function to be realized, the MSPI-AM methodology enables the design of multiple materials, new structures, and corresponding printing processes in parallel and emphasizes their mutual compatibility, providing a systematic solution to the existing challenges for laser-metal AM. MSPI-AM is defined by two methodological ideas: “the right materials printed in the right positions” and “unique structures printed for unique functions.” The increasingly creative methods for engineering both micro- and macrostructures within single printed components have led to the use of AM to produce more complicated structures with multimaterials. It is now feasible to design and print multimaterial components with spatially varying microstructures and properties (e.g., nanocomposites, in situ composites, and gradient materials), further enabling the integration of functional structures with electronics within the volume of a laser-printed monolithic part. These complicated structures (e.g., integral topology optimization structures, biomimetic structures learned from nature, and multiscale hierarchical lattice or cellular structures) have led to breakthroughs in both mechanical performance and physical/chemical functionality. Proactive realization of high performance and multifunctionality requires cross-scale coordination mechanisms (i.e., from the nano/microscale to the macroscale).OUTLOOKOur MSPI-AM continues to develop into a practical methodology that contributes to the high performance and multifunctionality goals of AM. Many opportunities exist to enhance MSPI-AM. MSPI-AM relies on a more digitized material and structure development and printing, which could be accomplished by considering different paradigms for AM materials discovery with the Materials Genome Initiative, standardization of formats for digitizing materials and structures to accelerate data aggregation, and a systematic printability database to enhance autonomous decision-making of printers. MSPI-oriented AM becomes more intelligent in processes and production, with the integration of intelligent detection, sensing and monitoring, big-data statistics and analytics, machine learning, and digital twins. MSPI-AM further calls for more hybrid approaches to yield the final high-performance/multifunctional achievements, with more versatile materials selection and more comprehensive integration of virtual manufacturing and real production to navigate more complex printing. We hope that MSPI-AM can become a key strategy for the sustainable development of AM technologies. Download high-res image Open in new tab Download PowerpointMaterial-structure-performance integrated additive manufacturing (MSPI-AM).Versatile designed materials and innovative structures are simultaneously printed within an integral metallic component to yield high performance and multifunctionality, integrating in parallel the core elements of material, structure, process, and performance and a large number of related coupling elements and future potential elements to enhance the multifunctionality of printed components and the maturity and sustainability of laser AM technologies.

Jihong Zhu

Papers

Material-structure-performance integrated laser-metal additive manufacturing.