Transition metal carbides and nitrides (MXenes), a family of two-dimensional (2D) inorganic compounds, are materials composed of a few atomic layers of transition metal carbides, nitrides, or carbonitrides. Ti3C2, the first 2D layered MXene, was isolated in 2011. This material, which is a layered bulk material analogous to graphite, was derived from its 3D phase, Ti3AlC2 MAX. Since then, material scientists have either determined or predicted the stable phases of >200 different MXenes based on combinations of various transition metals such as Ti, Mo, V, Cr, and their alloys with C and N. Extensive experimental and theoretical studies have shown their exciting potential for energy conversion and electrochemical storage. To this end, we comprehensively summarize the current advances in MXene research. We begin by reviewing the structure types and morphologies and their fabrication routes. The review then discusses the mechanical, electrical, optical, and electrochemical properties of MXenes. The focus then turns to their exciting potential in energy storage and conversion. Energy storage applications include electrodes in rechargeable lithium- and sodium-ion batteries, lithium-sulfur batteries, and supercapacitors. In terms of energy conversion, photocatalytic fuel production, such as hydrogen evolution from water splitting, and carbon dioxide reduction are presented. The potential of MXenes for the photocatalytic degradation of organic pollutants in water, such as dye waste, is also addressed, along with their promise as catalysts for ammonium synthesis from nitrogen. Finally, their application potential is summarized.

Applications of 2D MXenes in energy conversion and storage systems

Solar vapour generation is an efficient way of harvesting solar energy for the purification of polluted or saline water. However, water evaporation suffers from either inefficient utilization of solar energy or relies on complex and expensive light-concentration accessories. Here, we demonstrate a hierarchically nanostructured gel (HNG) based on polyvinyl alcohol (PVA) and polypyrrole (PPy) that serves as an independent solar vapour generator. The converted energy can be utilized in situ to power the vaporization of water contained in the molecular meshes of the PVA network, where water evaporation is facilitated by the skeleton of the hydrogel. A floating HNG sample evaporated water with a record high rate of 3.2 kg m−2 h−1 via 94% solar energy from 1 sun irradiation, and 18–23 litres of water per square metre of HNG was delivered daily when purifying brine water. These values were achievable due to the reduced latent heat of water evaporation in the molecular mesh under natural sunlight. Effective energy confinement via tailored water transport in hierarchical nanostructured gels enables highly efficient solar vapour generation.

Highly efficient solar vapour generation via hierarchically nanostructured gels

As a ubiquitous solar-thermal energy conversion process, solar-driven evaporation has attracted tremendous research attention owing to its high conversion efficiency of solar energy and transformative industrial potential. In recent years, solar-driven interfacial evaporation by localization of solar-thermal energy conversion to the air/liquid interface has been proposed as a promising alternative to conventional bulk heating-based evaporation, potentially reducing thermal losses and improving energy conversion efficiency. In this Review, we discuss the development of the key components for achieving high-performance evaporation, including solar absorbers, evaporation structures, thermal insulators and thermal concentrators, and discuss how they improve the performance of the solar-driven interfacial evaporation system. We describe the possibilities for applying this efficient solar-driven interfacial evaporation process for energy conversion applications. The exciting opportunities and challenges in both fundamental research and practical implementation of the solar-driven interfacial evaporation process are also discussed. The thermal properties of solar energy can be exploited for many applications, including evaporation. Tao et al. review recent developments in the field of solar-driven interfacial evaporation, which have enabled higher-performance structures by localizing energy conversion to the air/liquid interface.

Solar-driven interfacial evaporation

MXene, a new series of 2D material, has been steadily advancing its applications to a variety of fields, such as catalysis, supercapacitor, molecular separation, electromagnetic wave interference shielding. This work reports a carefully designed aqueous droplet light heating system along with a thorough mathematical procedure, which combined leads to a precise determination of internal light-to-heat conversion efficiency of a variety of nanomaterials. The internal light-to-heat conversion efficiency of MXene, more specifically Ti3C2, was measured to be 100%, indicating a perfect energy conversion. Furthermore, a self-floating MXene thin membrane was prepared by simple vacuum filtration and the membrane, in the presence of a rationally chosen heat barrier, produced a light-to-water-evaporation efficiency of 84% under one sun irradiation, which is among the state of art energy efficiency for similar photothermal evaporation system. The outstanding internal light-to-heat conversion efficiency and great light...

MXene Ti3C2: An Effective 2D Light-to-Heat Conversion Material

Photothermal materials with broad solar absorption and high conversion efficiency have recently attracted significant interest. They are becoming a fast-growing research focus in the area of solar-driven vaporization for clean water production. The parallel development of thermal management strategies through both material and system designs has further improved the overall efficiency of solar vaporization. Collectively, this green solar-driven water vaporization technology has regained attention as a sustainable solution for water scarcity. In this review, we will report the recent progress in solar absorber material design based on various photothermal conversion mechanisms, evaluate the prerequisites in terms of optical, thermal and wetting properties for efficient solar-driven water vaporization, classify the systems based on different photothermal evaporation configurations and discuss other correlated applications in the areas of desalination, water purification and energy generation. This article aims to provide a comprehensive review on the current development in efficient photothermal evaporation, and suggest directions to further enhance its overall efficiency through the judicious choice of materials and system designs, while synchronously capitalizing waste energy to realize concurrent clean water and energy production.

Solar absorber material and system designs for photothermal water vaporization towards clean water and energy production

Self-assembling aluminium nanoparticles are used to make a plasmon-enhanced device for desalination. Plasmonics has generated tremendous excitement because of its unique capability to focus light into subwavelength volumes1, beneficial for various applications such as light harvesting2,3, photodetection4, sensing5, catalysis6 and so on. Here we demonstrate a plasmon-enhanced solar desalination device, fabricated by the self–assembly of aluminium nanoparticles into a three-dimensional porous membrane. The formed porous plasmonic absorber can float naturally on water surface, efficiently absorb a broad solar spectrum (>96%) and focus the absorbed energy at the surface of the water to enable efficient (∼90%) and effective desalination (a decrease of four orders of magnitude). The durability of the devices has also been examined, indicating a stable performance over 25 cycles under various illumination conditions. The combination of the significant desalination effect, the abundance and low cost of the materials, and the scalable production processes suggest that this type of plasmon-enhanced solar desalination device could provide a portable desalination solution.

Jingyang Wang

Papers

3D self-assembly of aluminium nanoparticles for plasmon-enhanced solar desalination

Reply to 'The merits of plasmonic desalination'