This paper describes computer simulations of various SOI MOSFETs with double and triple-gate structures, as well as gate-all-around devices. The concept of a triple-gate device with sidewalls extending into the buried oxide (hereby called a "/spl Pi/-gate" or "Pi-gate" MOSFET) is introduced. The Pi-gate device is simple to manufacture and offers electrical characteristics similar to the much harder to fabricate gate-all-around MOSFET. To explore the optimum design space for four different gate structures, simulations were performed with four variable device parameters: gate length, channel width, doping concentration, and silicon film thickness. The efficiency of the different gate structures is shown to be dependent of these parameters. The simulation results indicate that the the Pi-gate device is a very promising candidate for future nanometer MOSFET applications.

Multiple-gate SOI MOSFETs: device design guidelines

Conduction mechanisms in junctionless nanowire transistors (gated resistors) are compared to inversion-mode and accumulation-mode MOS devices. The junctionless device uses bulk conduction instead of surface channel. The current drive is controlled by doping concentration and not by gate capacitance. The variation of threshold voltage with physical parameters and intrinsic device performance is analyzed. A scheme is proposed for the fabrication of the devices on bulk silicon.

Junctionless nanowire transistor (JNT): Properties and design guidelines

This paper examines the performance degradation of a MOS device fabricated on silicon-on-insulator (SOI) due to the undesirable short-channel effects (SCE) as the channel length is scaled to meet the increasing demand for high-speed high-performing ULSI applications. The review assesses recent proposals to circumvent the SCE in SOI MOSFETs and a short evaluation of strengths and weaknesses specific to each attempt is presented. A new device structure called the dual-material gate (DMG) SOI MOSFET is discussed and its efficacy in suppressing SCEs such as drain-induced barrier lowering (DIBL), channel length modulation and hot-carrier effects, all of which affect the reliability of ultra-small geometry MOSFETs, is assessed.

https://web.iitd.ac.in/~mamidala/HTMLobj-161/March04.pdf

Controlling short-channel effects in deep-submicron SOI MOSFETs for improved reliability: a review

This paper describes computer simulations of various SOI MOSFETs with double and triple gate structures, as well as gate-all-around devices. The concept of a triple-gate device with sidewalls extending into the buried oxide (hereby called a "/spl Pi/-gate" or "Pi-gate" MOSFET) is introduced, The proposed device is simple to manufacture and offers electrical characteristics similar to the much harder to fabricate gate-all-around MOSFET.

Pi-Gate SOI MOSFET

Multi-gate SOI MOSFETs

Thin, narrow silicon-on-insulator n-channel MOSFETs have been fabricated. The drain current characteristics, when measured as a function of gate voltage at low temperature, exhibit a series of oscillations, which is characteristic of current transport in one-dimensional systems (quantum wires). Theoretical calculation of the current oscillations in the device show reasonable agreement with the experimental characteristics.

Jp. Colinge

Papers

A silicon-on-insulator quantum wire