A review of heat transfer data for single circular jet impingement

Heat transfer to impinging isothermal gas and flame jets

Publisher Summary This chapter presents a discussion on jet impingement heat transfer. The chapter describes the applications and physics of the flow and heat transfer phenomena, available empirical correlations and values they predict, and numerical simulation techniques and results of impinging jet devices for heat transfer. The relative strengths and drawbacks of the Reynolds stress model, algebraic stress models, shear stress transport, and v 2 f turbulence models for impinging jet flow and heat transfer are compared in the chapter. The chapter provides select model equations as well as quantitative assessments of model errors and judgments of model suitability. The review of recent impinging jet research publications identified a series of engineering research tasks that are important for improving the design and resulting performance of impinging jets: (1) clearly resolve the physical mechanisms by which multiple peaks occur in the transfer coefficient profiles, and clarify which mechanism(s) dominate in various geometries and Reynolds number regimes, (2) develop a turbulence model, and associated wall treatment if necessary, that reliably and efficiently provides time-averaged transfer coefficients, (3) develop alternate nozzle and installation geometries that provide higher efficiency, meaning improved Nu profiles at either a set flow or set blower power, and (4) further explore the effects of jet interference in jet array geometries, both experimentally and numerically. This includes improved design of exit pathways for spent flow in array installations.

/pdf/jet-impingement-heat-transfer-physics-correlations-and-3h1zkpep1u.pdf

Jet Impingement Heat Transfer: Physics, Correlations, and Numerical Modeling

Effect of jet-jet spacing on convective heat transfer to confined, impinging arrays of axisymmetric air jets

A review of jet-impingement heat transfer in gas turbine systems is presented. Characteristics of the different flow regions for submerged jets--free jet, stagnation flow, and wall jet--are reviewed. Heat transfer characteristics of both single and multiple jets are discussed with consideration of the effects of important parameters relevant to gas turbine systems including curvature of surfaces, crossflow, angle of impact, and rotation.

Jet-impingement heat transfer in gas turbine systems.

An experimental investigation is described that characterizes the convective heat transfer of a heated circular air jet impinging on a flat surface. The radial distributions of the recovery factor, the effectiveness, and the local heat transfer coefficient are presented. The recovery factor and the effectiveness depend on the spacing from jet exit to the impingement plate, but do not depend on jet Reynolds number. The effectiveness does not depend on the temperature difference between the jet and the ambient. A correlation is obtained for the effectiveness. The heat transfer coefficient is independent of the temperature difference between the jet and the ambient if it is defined with the difference between the heated wall temperature and the adiabatic wall temperature.

K. A. Sobolik

Papers

Effect of entrainment on the heat transfer to a heated circular air jet impinging on a flat surface