Poly(ethylene oxide) (PEO) based materials are widely considered as promising candidates of polymer hosts in solid-state electrolytes for high energy density secondary lithium batteries. They have several specific advantages such as high safety, easy fabrication, low cost, high energy density, good electrochemical stability, and excellent compatibility with lithium salts. However, the typical linear PEO does not meet the production requirement because of its insufficient ionic conductivity due to the high crystallinity of the ethylene oxide (EO) chains, which can restrain the ionic transition due to the stiff structure especially at low temperature. Scientists have explored different approaches to reduce the crystallinity and hence to improve the ionic conductivity of PEO-based electrolytes, including blending, modifying and making PEO derivatives. This review is focused on surveying the recent developments and issues concerning PEO-based electrolytes for lithium-ion batteries.

Poly(ethylene oxide)-based electrolytes for lithium-ion batteries

https://krc.cecri.res.in/ro_2006/034-2006.pdf

Review on gel polymer electrolytes for lithium batteries

Ionic liquids (ILs) are liquids consisting entirely of ions and can be further defined as molten salts having melting points lower than 100 °C. One of the most important research areas for IL utilization is undoubtedly their energy application, especially for energy storage and conversion materials and devices, because there is a continuously increasing demand for clean and sustainable energy. In this article, various application of ILs are reviewed by focusing on their use as electrolyte materials for Li/Na ion batteries, Li-sulfur batteries, Li-oxygen batteries, and nonhumidified fuel cells and as carbon precursors for electrode catalysts of fuel cells and electrode materials for batteries and supercapacitors. Due to their characteristic properties such as nonvolatility, high thermal stability, and high ionic conductivity, ILs appear to meet the rigorous demands/criteria of these various applications. However, for further development, specific applications for which these characteristic properties becom...

Application of Ionic Liquids to Energy Storage and Conversion Materials and Devices

Ionic liquids are defined today as liquids which solely consist of cations and anions and which by definition must have a melting point of 100 °C or below. Originating from electrochemistry in AlCl3 based liquids an enormous progress was made during the recent 10 years to synthesize ionic liquids that can be handled under ambient conditions, and today about 300 ionic liquids are already commercially available. Whereas the main interest is still focussed on organic and technical chemistry, various aspects of physical chemistry in ionic liquids are discussed now in literature. In this review article we give a short overview on physicochemical aspects of ionic liquids, such as physical properties of ionic liquids, nanoparticles, nanotubes, batteries, spectroscopy, thermodynamics and catalysis of/in ionic liquids. The focus is set on air and water stable ionic liquids as they will presumably dominate various fields of chemistry in future.

Air and water stable ionic liquids in physical chemistry

Ionic liquids as electrolytes for Li-ion batteries—An overview of electrochemical studies

The lithium ion binary room-temperature molten salt (i.e., ionic liquid), LiEMIBF 4 was prepared by mixing 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF 4 ) with LiBF 4 . The ionic conductivity of LiEMIBF 4 was 7.4 mS cm -1 at 20°C and lower than that of EMIBF 4 . A solidified LiEMIBF 4 , named GLiEMIBF 4 , was prepared by in situ polymerization of poly (ethyleneglycol) diacrylate with LiEMIBF 4 . The ionic conductivity of the homogeneous transparent membrane obtained was smaller than that of LiEMIBF 4 . The thermal decomposition temperatures of these ionic media measured by thermogravimetry-differential thermal analysis showed that LiEMIBF 4 and GLiEMIBF 4 have high thermal stability around 300°C. The cathodic limit of EMIBF 4 was ca. 1.1 V vs. Li/Li + measured by linear sweep voltammetry. To test the possibility of use of these ionic media for lithium-ion batteries, demonstration cells of Li[Li 1/3 Ti 5/3 ]O 4 /LiEMIBF 4 or GLiEMIBF 4 /LiCoO 2 were assembled. The capacity retention after 50 cycles was 93.8% of the initial capacity in the LiEMIBF 4 cell. Discharge potential profile of the GLiEMIBF 4 cell showed decline probably due to the concentration polarization in the gelled electrolyte. Liquid and gelled electrolytes composed of lithium ion coexisting room-temperature molten salt are shown to function as nonflammable electrolytes in the lithium-ion batteries.

K. Kuwana

Papers

Liquid and Polymer Gel Electrolytes for Lithium Batteries Composed of Room-Temperature Molten Salt Doped by Lithium Salt

Investigation on solvent-free solid polymer electrolytes for advanced lithium batteries and their performance

Development of solid polymer lithium secondary batteries

Ion diffusion mechanisms in the cross-linked poly(ether) doped with LiN(CF3SO2)2