Human skin is a remarkable organ. It consists of an integrated, stretchable network of sensors that relay information about tactile and thermal stimuli to the brain, allowing us to maneuver within our environment safely and effectively. Interest in large-area networks of electronic devices inspired by human skin is motivated by the promise of creating autonomous intelligent robots and biomimetic prosthetics, among other applications. The development of electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin (e-skin) akin to human skin. E-skins are already capable of providing augmented performance over their organic counterpart, both in superior spatial resolution and thermal sensitivity. They could be further improved through the incorporation of additional functionalities (e.g., chemical and biological sensing) and desired properties (e.g., biodegradability and self-powering). Continued rapid progress in this area is promising for the development of a fully integrated e-skin in the near future.

25th Anniversary Article: The Evolution of Electronic Skin (E-Skin): A Brief History, Design Considerations, and Recent Progress

Permanently cross-linked materials have outstanding mechanical properties and solvent resistance, but they cannot be processed and reshaped once synthesized Non–cross-linked polymers and those with reversible cross-links are processable, but they are soluble We designed epoxy networks that can rearrange their topology by exchange reactions without depolymerization and showed that they are insoluble and processable Unlike organic compounds and polymers whose viscosity varies abruptly near the glass transition, these networks show Arrhenius-like gradual viscosity variations like those of vitreous silica Like silica, the materials can be wrought and welded to make complex objects by local heating without the use of molds The concept of a glass made by reversible topology freezing in epoxy networks can be readily scaled up for applications and generalized to other chemistries

Silica-Like Malleable Materials from Permanent Organic Networks

The controlled synthesis of monodisperse nanospheres faces a number of difficulties, such as extensive crosslinking during hydrothermal processes. Here, the authors show a route for the controlled synthesis of mesoporous polymer nanospheres, which can be further converted into carbon nanospheres through carbonization.

/pdf/a-facile-soft-template-synthesis-of-mesoporous-polymeric-and-8vdw1lf6wb.pdf

A facile soft-template synthesis of mesoporous polymeric and carbonaceous nanospheres

Smart materials with an in-built ability to repair damage caused by normal wear and tear could prove useful in a wide range of applications. Most healable polymer-based materials so far developed require heating of the damaged area. But Burnworth et al. have now produced materials — in the form of polymer strands linked through metal complexes — that can be mended through exposure to light. The metal complexes in these materials can absorb ultraviolet light that is then converted into heat, which temporarily unlinks the polymer strands for quick and efficient defect healing. In principle, healing can take place in situ and while under load. Polymers with the ability to repair themselves after sustaining damage could extend the lifetimes of materials used in many applications1. Most approaches to healable materials require heating the damaged area2,3,4. Here we present metallosupramolecular polymers that can be mended through exposure to light. They consist of telechelic, rubbery, low-molecular-mass polymers with ligand end groups that are non-covalently linked through metal-ion binding. On exposure to ultraviolet light, the metal–ligand motifs are electronically excited and the absorbed energy is converted into heat. This causes temporary disengagement of the metal–ligand motifs and a concomitant reversible decrease in the polymers’ molecular mass and viscosity5, thereby allowing quick and efficient defect healing. Light can be applied locally to a damage site, so objects can in principle be healed under load. We anticipate that this approach to healable materials, based on supramolecular polymers and a light–heat conversion step, can be applied to a wide range of supramolecular materials that use different chemistries.

/pdf/optically-healable-supramolecular-polymers-58jhlfa1ij.pdf

Optically healable supramolecular polymers

Self-healing polymers composed of microencapsulated healing agents exhibit remarkable mechanical performance and regenerative ability, but are limited to autonomic repair of a single damage event in a given location. Self-healing is triggered by crack-induced rupture of the embedded capsules; thus, once a localized region is depleted of healing agent, further repair is precluded. Re-mendable polymers can achieve multiple healing cycles, but require external intervention in the form of heat treatment and applied pressure. Here, we report a self-healing system capable of autonomously repairing repeated damage events. Our bio-inspired coating-substrate design delivers healing agent to cracks in a polymer coating via a three-dimensional microvascular network embedded in the substrate. Crack damage in the epoxy coating is healed repeatedly. This approach opens new avenues for continuous delivery of healing agents for self-repair as well as other active species for additional functionality.

/pdf/self-healing-materials-with-microvascular-networks-5eug4y8ngz.pdf

Self-healing materials with microvascular networks

We have developed a transparent organic polymeric material that can repeatedly mend or "re-mend" itself under mild conditions. The material is a tough solid at room temperature and below with mechanical properties equaling those of commercial epoxy resins. At temperatures above 120 degrees C, approximately 30% (as determined by solid-state nuclear magnetic resonance spectroscopy) of "intermonomer" linkages disconnect but then reconnect upon cooling, This process is fully reversible and can be used to restore a fractured part of the polymer multiple times, and it does not require additional ingredients such as a catalyst, additional monomer, or special surface treatment of the fractured interface.

https://science.sciencemag.org/content/sci/295/5560/1698.full.pdf

Kevin Sheran

Papers

A Thermally Re-mendable Cross-Linked Polymeric Material