In this paper, the idea of operating an inverter to mimic a synchronous generator (SG) is motivated and developed. We call the inverters that are operated in this way synchronverters. Using synchronverters, the well-established theory/algorithms used to control SGs can still be used in power systems where a significant proportion of the generating capacity is inverter-based. We describe the dynamics, implementation, and operation of synchronverters. The real and reactive power delivered by synchronverters connected in parallel and operated as generators can be automatically shared using the well-known frequency- and voltage-drooping mechanisms. Synchronverters can be easily operated also in island mode, and hence, they provide an ideal solution for microgrids or smart grids. Both simulation and experimental results are given to verify the idea.

/pdf/synchronverters-inverters-that-mimic-synchronous-generators-3yjna0swxx.pdf

Synchronverters: Inverters That Mimic Synchronous Generators

In this paper, a solution is described that makes it possible for wind turbines using doubly-fed induction generators to stay connected to the grid during grid faults. The key of the solution is to limit the high current in the rotor in order to protect the converter and to provide a bypass for this current via a set of resistors that are connected to the rotor windings. With these resistors, it is possible to ride through grid faults without disconnecting the turbine from the grid. Because the generator and converter stay connected, the synchronism of operation remains established during and after the fault and normal operation can be continued immediately after the fault has been cleared. An additional feature is that reactive power can be supplied to the grid during long dips in order to facilitate voltage restoration. A control strategy has been developed that takes care of the transition back to normal operation. Without special control action, large transients would occur.

/pdf/ridethrough-of-wind-turbines-with-doubly-fed-induction-519dcgz5m8.pdf

Ridethrough of wind turbines with doubly-fed induction generator during a voltage dip

Increasing levels of wind generation has resulted in an urgent need for the assessment of their impact on frequency control of power systems. Whereas increased system inertia is intrinsically linked to the addition of synchronous generation to power systems, due to differing electromechanical characteristics, this inherent link is not present in wind turbine generators. Regardless of wind turbine technology, the displacement of conventional generation with wind will result in increased rates of change of system frequency. The magnitude of the frequency excursion following a loss of generation may also increase. Amendment of reserve policies or modification of wind turbine inertial response characteristics may be necessary to facilitate increased levels of wind generation. This is particularly true in small isolated power systems.

Frequency control and wind turbine technologies

This paper presents a comprehensive study on the state-of-the-art and emerging wind energy technologies from the electrical engineering perspective. In an attempt to decrease cost of energy, increase the wind energy conversion efficiency, reliability, power density, and comply with the stringent grid codes, the electric generators and power electronic converters have emerged in a rigorous manner. From the market based survey, the most successful generator-converter configurations are addressed along with few promising topologies available in the literature. The back-to-back connected converters, passive generator-side converters, converters for multiphase generators, and converters without intermediate dc-link are investigated for high-power wind energy conversion systems (WECS), and presented in low and medium voltage category. The onshore and offshore wind farm configurations are analyzed with respect to the series/parallel connection of wind turbine ac/dc output terminals, and high voltage ac/dc transmission. The fault-ride through compliance methods used in the induction and synchronous generator based WECS are also discussed. The past, present and future trends in megawatt WECS are reviewed in terms of mechanical and electrical technologies, integration to power systems, and control theory. The important survey results, and technical merits and demerits of various WECS electrical systems are summarized by tables. The list of current and future wind turbines are also provided along with technical details.

High-Power Wind Energy Conversion Systems: State-of-the-Art and Emerging Technologies

Synchronous and fixed-speed induction generators release the kinetic energy of their rotating mass when the power system frequency is reduced. In the case of doubly fed induction generator (DFIG)-based wind turbines, their control system operates to apply a restraining torque to the rotor according to a predetermined curve with respect to the rotor speed. This control system is not based on the power system frequency and there is negligible contribution to the inertia of the power system. A DFIG control system was modified to introduce inertia response to the DFIG wind turbine. Simulations were used to show that with the proposed control system, the DFIG wind turbine can supply considerably greater kinetic energy than a fixed-speed wind turbine.

Comparison of the response of doubly fed and fixed-speed induction generator wind turbines to changes in network frequency

It is now recognized that many large wind farms will employ doubly fed induction generator (DFIG) variable speed wind turbines. A number of such wind farms are already in operation and more are planned or under construction. With the rising penetration of wind power into electricity networks, increasingly comprehensive studies are required to identify the interaction between the wind farm(s) and the power system. These require accurate models of doubly fed induction generator wind turbines and their associated control and protection circuits. A dynamic model has been derived, which can be used to simulate the DFIG wind turbine using a single-cage and double-cage representation of the generator rotor, as well as a representation of its control and protection circuits. The model is suitable for use in transient stability programs that can be used to investigate large power systems. The behavior of a wind farm and the network under various system disturbances was studied using this dynamic model. The influence of the DFIG control on the stability of the wind farm was also investigated by considering different control gains and by applying network voltage control through both stator side and rotor side converters.

/pdf/dynamic-modeling-of-doubly-fed-induction-generator-wind-5aukt7avly.pdf

Dynamic modeling of doubly fed induction generator wind turbines

The dynamic modelling of large (MW) capacity fixed and variable speed induction generator wind turbines is discussed. A reduced order dynamic machine model is derived suitable for modelling both fixed speed and doubly-fed asynchronous generator wind turbines. Control schemes for variable speed turbines, using doubly-fed induction generators (DFIG), are described and simulated. Speed control characteristics and converter protection of the DFIG are implemented in the model. The operation of the models during power system disturbances such as network voltage sags and three-phase faults, as well as the possibility of network voltage instability, are investigated. Simulation results are presented using typical turbine and network data for wind farm installations.

Comparison of fixed speed and doubly-fed induction wind turbines during power system disturbances

Comparison of 5th order and 3rd order machine models for doubly fed induction generator (DFIG) wind turbines

Throughout Europe there is an increasing trend of connecting high penetrations of wind turbines to the transmission networks. This has resulted in transmission system operators revising their grid code documents for the connection of large wind farms. These specifications require large MW capacity wind farms to have the ability to assist in some of the power system control services currently carried out by conventional synchronous generation. These services include voltage and frequency control. It is now recognized that much of this new wind generation plant will use either fixed speed induction generator (FSIG)- or doubly fed induction generator (DFIG)-based wind turbines. The addition of a control loop to synthesize inertia in the DFIG wind turbine using the power electronic control system has been described. The possibility of deloading wind turbines for frequency response using blade pitch angle control is discussed. A pitch control scheme to provide frequency response from FSIG and DFIG wind turbines is also described. A case study of an FSIG wind turbine with frequency response capabilities is investigated. Copyright © 2004 John Wiley & Sons, Ltd.

Power system frequency response from fixed speed and doubly fed induction generator-based wind turbines

The generation of electrical power using sustainable sources of energy is developing rapidly. The authors describe how the security and quality of electricity supply might be maintained. They discuss the control of variable speed using doubly fed induction generators (DFIG) in wind turbines. The DFIG is constructed from a wound rotor asynchronous machine. Variable speed operation is obtained by injecting a variable voltage into the rotor at slip frequency The injected rotor voltage is obtained using two AC/DC insulated gate bipolar transistor based voltage source converters (VSC), linked by a DC bus. The converter ratings determine the variable speed range. Speed control for optimum power, system frequency control, and machine inertia are also discussed.

L. Holdsworth

Papers

Dynamic modeling of doubly fed induction generator wind turbines

Comparison of fixed speed and doubly-fed induction wind turbines during power system disturbances

Comparison of 5th order and 3rd order machine models for doubly fed induction generator (DFIG) wind turbines

Power system frequency response from fixed speed and doubly fed induction generator-based wind turbines

Control of DFIG wind turbines