The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.

Ultracapacitors: Why, How, and Where is the Technology

Interpretation of X-ray Powder Diffraction Patterns . By H. Lipson and H. Steeple. Pp. viii + 335 + 3 plates. (Mac-millan: London; St Martins Press: New York, May 1970.) £4.

X-Ray Diffraction

Recent developments of zinc oxide based photocatalyst in water treatment technology: A review

Persistent organic pollutants (POPs) are carbon-based chemical substances that are resistant to environmental degradation and may not be completely removed through treatment processes. Their persistence can contribute to adverse health impacts on wild-life and human beings. Thus, the solar photocatalysis process has received increasing attention due to its great potential as a green and eco-friendly process for the elimination of POPs to increase the security of clean water. In this context, ZnO nanostructures have been shown to be prominent photocatalyst candidates to be used in photodegradation owing to the facts that they are low-cost, non-toxic and more efficient in the absorption across a large fraction of the solar spectrum compared to TiO 2 . There are several aspects, however, need to be taken into consideration for further development. The purpose of this paper is to review the photo-degradation mechanisms of POPs and the recent progress in ZnO nanostructured fabrication methods including doping, heterojunction and modification techniques as well as improvements of ZnO as a photocatalyst. The second objective of this review is to evaluate the immobilization of photocatalyst and suspension systems while looking into their future challenges and prospects.

A review of ZnO nanoparticles as solar photocatalysts: Synthesis, mechanisms and applications

Over the last decade, significant effort has been devoted to the applications of hierarchically structured porous materials owing to their outstanding properties such as high surface area, excellent accessibility to active sites, and enhanced mass transport and diffusion. The hierarchy of porosity, structural, morphological and component levels in these materials is key for their high performance in all kinds of applications. The introduction of hierarchical porosity into materials has led to a significant improvement in the performance of materials. Herein, recent progress in the applications of hierarchically structured porous materials from energy conversion and storage, catalysis, photocatalysis, adsorption, separation, and sensing to biomedicine is reviewed. Their potential future applications are also highlighted. We particularly dwell on the relationship between hierarchically porous structures and properties, with examples of each type of hierarchically structured porous material according to its chemical composition and physical characteristics. The present review aims to open up a new avenue to guide the readers to quickly obtain in-depth knowledge of applications of hierarchically porous materials and to have a good idea about selecting and designing suitable hierarchically porous materials for a specific application. In addition to focusing on the applications of hierarchically porous materials, this comprehensive review could stimulate researchers to synthesize new advanced hierarchically porous solids.

Applications of hierarchically structured porous materials from energy storage and conversion, catalysis, photocatalysis, adsorption, separation, and sensing to biomedicine

Animal fleshing (ANFL) generated as solid waste from tannery industries was vermicomposted using the epigeic earthworm Eisenia foetida. The mixing ratio of ANFL with cow dung and agricultural residues as feed mixtures was maintained to be 3:1:1 respectively during the vermicomposting experiments for 50 days. Vermicomposting resulted in the reduction of pH 6.74 and C:N ratio 15.5 compared to the control sample. A notable increase in earthworm biomass was also observed in the vermin bioreactor. The germination index of 84% for tomato seedlings (Lycopersicon esculentum cv. PKM1) was observed for the vermicomposted soil. Scanning electron microscope and Fourier transform infrared spectroscopy were recorded to identify the changes in surface morphology and functional groups in the control and vermicomposted samples. The results obtained from the present study indicated that the earthworm E. foetida was able to convert ANFL into nutrient-enriched products.

Vermicomposting of Solid Waste Generated from Leather Industries Using Epigeic Earthworm Eisenia foetida

Microwave combustion synthesis, structural, optical and magnetic properties of Zn1−xSrxFe2O4 nanoparticles

Electrical conductivity study of porous carbon composite derived from rice husk

ZnO nanomaterials with different morphologies such as nanoflakes, spherical nanoparticles (SNPs), and nanorods have been synthesized via a simple low temperature coprecipitation method. The concent...

Effects of Morphology and Zr Doping on Structural, Optical, and Photocatalytic Properties of ZnO Nanostructures

Studies on the microwave assisted and conventional combustion synthesis of Hibiscus rosa-sinensis plant extract based ZnFe2O4 nanoparticles and their optical and magnetic properties

L. John Kennedy

Papers

Vermicomposting of Solid Waste Generated from Leather Industries Using Epigeic Earthworm Eisenia foetida

Microwave combustion synthesis, structural, optical and magnetic properties of Zn1−xSrxFe2O4 nanoparticles

Electrical conductivity study of porous carbon composite derived from rice husk

Effects of Morphology and Zr Doping on Structural, Optical, and Photocatalytic Properties of ZnO Nanostructures

Studies on the microwave assisted and conventional combustion synthesis of Hibiscus rosa-sinensis plant extract based ZnFe2O4 nanoparticles and their optical and magnetic properties