Orthogonal differential vector signaling codes are described which support encoded sub-channels allowing transport of distinct but temporally aligned data and clocking signals over the same transport medium. Embodiments providing enhanced LPDDR interfaces are described which are suitable for implementation in both conventional high-speed CMOS and DRAM integrated circuit processes.

Orthogonal differential vector signaling codes with embedded clock

Multi-drop communications channels can have significantly deep notches in their frequency response causing a corresponding limitation of the effective data transmission rate. A special time-ordered coding method is described which results in the emitted spectrum of the data stream transmitted into the channel having a notch at the same frequency as the notch in the channel frequency response, permitting channel receivers to successfully decode the transmitted data stream. The described coding method may be applied at various multiples of the channel notch frequency to support different throughput rates, and may be combined with other coding techniques such as group or vector signaling codes.

Multidrop data transfer

Methods and systems are described for generating, using a voltage-controlled oscillator (VCO), a plurality of phases of a local clock signal, generating a phase-error signal using a phase comparator receive a phase of the local clock signal and a reference clock signal, and configured to output the phase-error signal, generating a frequency-lock assist (FLA) signal using a FLA circuit receiving one or more phases of the local clock signal and the reference clock signal, the FLA signal indicative of a magnitude of a frequency error between the reference clock signal and the local clock signal, and generating a VCO control signal using an error accumulator circuit receiving the phase-error signal and the FLA signal, and responsively providing the VCO control signal to the VCO to lock the local clock signal to the reference clock signal

Lock detector for phase lock loop

PROBLEM TO BE SOLVED: To provide systems, methods and apparatus that enable improved transmission rates on physical interfaces between devices within an apparatus.SOLUTION: System, methods and apparatus are described that facilitate transmission of data, particularly between two devices within an electronic apparatus. Information is transmitted in N-phase polarity encoded symbols. Drivers may be adapted or configured to align state transitions on two or more connectors in order to minimize a transition period between consecutive symbols. The drivers may include circuits that advance or delay certain transitions. The drivers may include pre-emphasis circuits that operate to drive the state of a connector for a portion of the transition period, even when the connector is transitioned to an undriven state.SELECTED DRAWING: Figure 10

N-phase signal transition alignment

Described are apparatuses and methods for reducing channel physical layer (C-PHY) switching jitter. An apparatus may include a pattern dependent delay circuit to detect a switching pattern of at least three data signals on respective wires and adaptively change delays of the at least three data signals based on the switching pattern. The apparatus may further include a transmitter, coupled to the pattern dependent delay circuit, to transmit the at least three data signals.

Apparatuses and methods for reducing switching jitter

System, methods and apparatus are described that improve signaling in a three-wire multiphase communication link. A method for data communications includes determining a transition in signaling state of three wires of a communication link between a pair of consecutive symbols transmitted on the communication link, and enhancing or attenuating energy of a signal prior to the transition in signaling state of the three wires when the transition in signaling state includes a change in signaling state of a wire on which the signal is transmitted. Each symbol may define a different signaling state of the three wires of the communication link. For each symbol transmitted, two of the three wires are differentially encoded and the third wire is in a neutral state. Different wires are differentially encoded during transmission of consecutive symbols.

Programmable pre-emphasis circuit for MIPI C-PHY

Serializers and deserializers for odd ratio parallel data buses are disclosed. In one embodiment, serializers and deserializers operating with an odd number of parallel data bits work with a half-rate clock to provide a serial data stream at a full clock rate. By providing a half-rate clock, power and area are conserved on the integrated circuit incorporating the serializer. Additionally, by providing a 7:1 serializer, the bus is now compatible with the MIPI C-PHY standard.

Serializer and deserializer for odd ratio parallel data bus

A feed-forward bias circuit biases body bias terminals of transistors of another circuit to compensate for PVT variations in the other circuit.In some aspects,the feed- forward bias circuit compensates for transistor process corners in a circuit by enabling the generation of different bias signals under different corner conditions.In some implementations,the feed-forward bias circuit is used to bias a delay circuit so that the delay circuit exhibits relatively constant delay characteristics over different PVT conditions.

Feed-forward bias circuit

A divide-by-seven divider includes a first module clocked with a clock input, and a second module coupled to the first module and clocked with an output of the first module. The first and second modules are configured to divide the clock input by seven and to output the divided clock input. The first module may be configured to store a count between 0 and 3 in a count cycle. The divide-by-seven divider may further include a feedback module coupled between the first module and the second module that is configured to cause the first module to skip one count in the count between 0 and 3 once every other count cycle. Specifically, the first module may be configured to store incrementally the count “00,” “10,” “11,” and “01” in a count cycle and to skip the count “01” every other count cycle based on input from the feedback module.

Le Zhang

Papers

Programmable pre-emphasis circuit for MIPI C-PHY

Serializer and deserializer for odd ratio parallel data bus

Feed-forward bias circuit

Low power divide-by-seven divider