Flexible and wearable electronics are attracting wide attention due to their potential applications in wearable human health monitoring and care systems. Carbon materials have combined superiorities such as good electrical conductivity, intrinsic and structural flexibility, light weight, high chemical and thermal stability, ease of chemical functionalization, as well as potential mass production, enabling them to be promising candidate materials for flexible and wearable electronics. Consequently, great efforts are devoted to the controlled fabrication of carbon materials with rationally designed structures for applications in next-generation electronics. Herein, the latest advances in the rational design and controlled fabrication of carbon materials toward applications in flexible and wearable electronics are reviewed. Various carbon materials (carbon nanotubes, graphene, natural-biomaterial-derived carbon, etc.) with controlled micro/nanostructures and designed macroscopic morphologies for high-performance flexible electronics are introduced. The fabrication strategies, working mechanism, performance, and applications of carbon-based flexible devices are reviewed and discussed, including strain/pressure sensors, temperature/humidity sensors, electrochemical sensors, flexible conductive electrodes/wires, and flexible power devices. Furthermore, the integration of multiple devices toward multifunctional wearable systems is briefly reviewed. Finally, the existing challenges and future opportunities in this field are summarized.

Advanced Carbon for Flexible and Wearable Electronics.

Heterocyclic pyrrole molecules are in situ aligned and polymerized in the -absence of an oxidant between layers of the 2D Ti3C2Tx (MXene), resulting in high volumetric and gravimetric capacitances with capacitance retention of 92% after 25,000 cycles at a 100 mV s(-1) scan rate.

Pseudocapacitive Electrodes Produced By Oxidant-Free Polymerization of Pyrrole Between the Layers of 2D Titanium Carbide (MXene)

Efficient Carbon Nanotube Photodiodes A single photon absorbed in a single-walled carbon nanotube device can generate multiple unbound particles carrying an electric charge. Gabor et al. (p. 1367) report that in such a device at low temperatures, excitation with light of increasing energy leads to well-defined stepwise increases in current. Interestingly, because of the unique band structure of carbon nanotubes, this behavior is analogous to particle-antiparticle creation commonly observed in high-energy particle physics. These observations point to the promise of investigations in other nanoscale carbon systems, such as graphene, and could lead to numerous applications, including highly sensitive photon detection and ultra-efficient photovoltaics. The decay of photoexcited electrons in a carbon nanotube device creates multiple pairs of charge carriers. We observed highly efficient generation of electron-hole pairs due to impact excitation in single-walled carbon nanotube p-n junction photodiodes. Optical excitation into the second electronic subband E22 leads to striking photocurrent steps in the device I-VSD characteristics that occur at voltage intervals of the band-gap energy EGAP/e. Spatially and spectrally resolved photocurrent combined with temperature-dependent studies suggest that these steps result from efficient generation of multiple electron-hole pairs from a single hot E22 carrier. This process is both of fundamental interest and relevant for applications in future ultra-efficient photovoltaic devices.

https://www.lassp.cornell.edu/lassp_data/mceuen/homepage/Publications/Gabor_Science_2009_supmat.pdf

Supporting Online Material for Extremely Efficient Multiple Electron-Hole Pair Generation in Carbon Nanotube Photodiodes

2D Black Phosphorus–Based Biomedical Applications

Infection is a major obstacle to wound healing. To enhance the healing of infected wounds, dressings with antibacterial activities and multifunctional properties to promote wound healing are highly desirable. Herein, gelatin-grafted-dopamine (GT-DA) and polydopamine-coated carbon nanotubes (CNT-PDA) were used to engineer antibacterial, adhesive, antioxidant and conductive GT-DA/chitosan/CNT composite hydrogels through the oxidative coupling of catechol groups using a H2O2/HRP (horseradish peroxidase) catalytic system. The addition of the antibiotic doxycycline endowed the hydrogels with antimicrobial activity to treat infected full-thickness defect wounds. Additionally, CNT-PDA endowed these hydrogels with an excellent photothermal effect, leading to good in vitro and in vivo antibacterial activities against Gram-positive and Gram-negative bacteria. The catechol group and polydopamine imparted tissue adhesiveness, and the hemostatic and antioxidant abilities of these hydrogels were also investigated. The porosity, degradability, swelling, rheological, mechanical, and conductive behaviors of these hydrogels were finely regulated by changing the concentration of CNT-PDA. Hemolysis and cytocompatibility tests using L929 fibroblast cells confirmed the good biocompatibility of these hydrogels. The wound closure, collagen deposition, histomorphological examination and immunofluorescence staining results demonstrated the excellent effects of these hydrogels in an infected full-thickness mouse skin defect wound. In summary, the adhesive antibacterial and conductive GT-DA/chitosan/CNT hydrogels showed great potential as multifunctional bioactive dressings for the treatment of infected wounds.

Mussel-inspired, antibacterial, conductive, antioxidant, injectable composite hydrogel wound dressing to promote the regeneration of infected skin.

Transparent conducting films (TCFs) are a critical component in many personal electronic devices. Transparent and conductive doped metal oxides are widely used in industry due to their excellent optoelectronic properties as well as the mature understanding of their production and handling. However, they are not compatible with future flexible electronics developments where large-scale production will likely involve roll-to-roll manufacturing. Recent studies have shown that carbon nanotubes provide unique chemical, physical, and optoelectronic properties, making them an important alternative to doped metal oxides. This Review provides a comprehensive analysis of carbon nanotube transparent conductive films covering detailed fabrication methods including patterning of the films, chemical doping effects, and hybridization with other materials. There is a focus on optoelectronic properties of the films and potential in applications such as photovoltaics, touch panels, liquid crystal displays, and organic light-emitting diodes in conjunction with a critical analysis of both the merits and shortcomings of carbon nanotube transparent conductive films.

Recent Development of Carbon Nanotube Transparent Conductive Films

Single-walled carbon nanotubes (SWCNTs) have attracted significant attention due to their outstanding mechanical, chemical and optoelectronic properties, which makes them promising candidates for use in a wide range of applications. However, as-produced SWCNTs have a wide distribution of various chiral species with different properties (i.e. electronic structures). In order to take full advantage of SWCNT properties, highly purified and well-separated SWCNTs are of great importance. Recent advances have focused on developing new strategies to effectively separate nanotubes into single-chirality and/or semiconducting/metallic species and integrating them into different applications. This review highlights recent progress in this cutting-edge research area alongside the enormous development of their identification and structural characterization techniques. A comprehensive review of advances in both controlled synthesis and post-synthesis separation methods of SWCNTs are presented. The relationship between the unique structure of SWCNTs and their intrinsic properties is also discussed. Finally, important future directions for the development of sorting and purification protocols for SWCNTs are provided.

Synthesis, purification, properties and characterization of sorted single-walled carbon nanotubes

Single-walled carbon nanotubes (SWCNTs) exhibit outstanding properties that make them appealing in a wide range of applications. However, their properties are variable depending on the tube helicity (chirality), which has been a challenge for a long time and needs to be effectively controlled. In recent years, tremendous efforts have been made to control the electrical type/chirality of nanotubes through both direct controlled synthesis and postsynthesis separation methods. Driven by these breakthroughs, the applications of separated families of SWCNTs in various fields have emerged as a new topic of research. In this Review, an overview of recent advances in the use of highly purified and well-separated SWCNTs in a comprehensive range of applications is presented including photovoltaics, transistors, batteries, sensors, light emitters, biological/medical fields, and others. Finally, important future directions for the utilization of separated SWCNTs in these fields are provided.

Recent Advances in Applications of Sorted Single‐Walled Carbon Nanotubes

High‐quality, few‐layer black‐phosphorus (BP) flakes are prepared in a common organic solvent with very short processing times using microwave‐assisted liquid‐phase exfoliation. A comprehensive range of analysis, combined with density‐functional theory calculations, confirms that the product prepared using the microwave technique is few‐layer BP with small‐ and large‐area flakes. The suspended exfoliated BP sheets show excellent stability, while samples dispersed onto silicon from the suspensions exhibit low oxidation levels after several days in ambient conditions. This straightforward synthesis method is facile, efficient, and extremely fast, and does not involve use of any surfactant or ultrasonication steps and will facilitate future development of phosphorene research.

/pdf/efficient-and-fast-synthesis-of-few-layer-black-phosphorus-c9t2tx17o3.pdf

Efficient and Fast Synthesis of Few-Layer Black Phosphorus via Microwave-Assisted Liquid-Phase Exfoliation

A novel type of solar cell has been developed based on charge separation at the heterojunction formed by a transparent conducting MXene electrode and an n-type silicon (n-Si) wafer. A thin layer of the native silicon dioxide plays an important role in suppressing the recombination of charge carriers. A two-step chemical treatment can increase the device efficiency by about 40%. Promisingly, an average power conversion efficiency of over 10% under simulated full sunlight is achieved for this novel class of solar cell with the application of an antireflection layer. The efficiencies of these novel solar cells based on a MXene-Si heterojunction achieved in this work point to great promise in emerging photovoltaic technology. In addition to their high efficiency, the excellent reproducibility of such devices establishes a solid base for possible future commercialization.

https://espace.library.uq.edu.au/view/UQ:708e84b/UQ708e84b_OA.pdf

LePing Yu

Papers

Recent Development of Carbon Nanotube Transparent Conductive Films

Synthesis, purification, properties and characterization of sorted single-walled carbon nanotubes

Recent Advances in Applications of Sorted Single‐Walled Carbon Nanotubes

Efficient and Fast Synthesis of Few-Layer Black Phosphorus via Microwave-Assisted Liquid-Phase Exfoliation

Ti3C2Tx (MXene)-Silicon Heterojunction for Efficient Photovoltaic Cells