Magnetic confinement fusion (MCF) based on neutral particle beam irradiation reached the highest gains with JET and is discussed in relation to the ITER project for a possible re-orientation with respect to the ignition process. Ignition plays a similar role for inertial confinement fusion (ICF). After a short review about specific ICF developments, the fast igniter development offered a re-consideration of igniting DT fuel at modest or low compression. The observation of extreme anomalies (Sauerbrey 1996, Zhang et al., 1998 and Badziak et al., 1999) at interaction of picosecond (ps) laser pulses above TW power could be explained as a skin layer mechanism based on earlier computations (Hora et al., 2002) with nonlinear (ponderomotive) force acceleration. The resulting very high ion current density space charge neutral plasma blocks interacting as pistons to ignite DT may lead to a new scheme of laser fusion with low cost energy generation.

New aspects for fusion energy using inertial confinement

High energy heavy ions were generated in laser produced plasma at moderate laser energy, with a large focal spot size of 0.5 mm diameter. The laser beam was provided by the 10 GW GSI-NHELIX laser systems, and the ions were observed spectroscopically in status nascendi with high spatial and spectral resolution. Due to the focal geometry, plasma jet was formed, containing high energy heavy ions. The velocity distribution was measured via an observation of Doppler shifted characteristic transition lines. The observed energy of up to 3 MeV of F-ions deviates by an order of magnitude from the well-known Gitomer (Gitomer et al., 1986) scaling, and agrees with the higher energies of relativistic self focusing.

/pdf/high-energy-heavy-ion-jets-emerging-from-laser-plasma-3hjrk2goi7.pdf

High energy heavy ion jets emerging from laser plasma generated by long pulse laser beams from the NHELIX laser system at GSI

It is shown that the effective hot electron temperature, Thot, associated with the energetic electrons produced during the interaction of an ultra-intense laser with thin solid targets is dependent on the thickness of the target. We report the first direct experimental observations of electron energy spectra obtained from laser-solid interactions that indicates the reflexing of electrons in thin targets results in higher electron temperatures than those obtained in thick target interactions. This can occur for targets whose thickness, xt, is less than about half the range of an electron at the energy associated with the initial effective electron temperature, provided the laser pulse length is at least cτp > 2xt. A simple theoretical model that demonstrates the physical mechanism behind this enhanced heating is presented and the results of computer simulations are used to verify the model.

Evidence of enhanced effective hot electron temperatures in ultraintense laser-solid interactions due to reflexing

The results of studies of high-intensity proton beam generation from thin (1–3 μm) solid targets irradiated by 0.35 ps laser pulse of energy up to 15 J and intensity up to 2×1019 W/cm2 are reported. It is shown that the proton beams of terawatt power and intensity around 1018 W/cm2 at the source can be produced when the laser-target interaction conditions approach the skin-layer ponderomotive acceleration requirements. The proton beam parameters remarkably depend on the target structure and can be significantly increased with the use of a double-layer Au/PS target (plastic covered by 0.1–0.2 μm Au front layer).

Ultraintense proton beams from laser-induced skin-layer ponderomotive acceleration

Some preliminary views are presented to the topic “Fast High Density Plasma Blocks Driven by Picosecond Terawatt Lasers” of the UWS-International Workshop 1–4 December 2004 in Sydney, Australia, underlining the motivation to explain the difference between the relativistic and the subrelativistic effects of ps-laser pulse interaction with plasma at powers above TW. This refers to specifically selected experimental and theoretical presentations at the workshop containing results for explaining the differences but also the important applications for studies on the fast ignitor scheme for application on nuclear fusion energy. One of the aims with relativistic proton beams is to realize conditions of spark ignition, while the subrelativistic case implies the generation of fast plasma blocks eventually with the possibility to ignite a fusion flame in uncompressed solid DT fuel for a power station with high efficiency.

https://www.cambridge.org/core/services/aop-cambridge-core/content/view/S0263034605050627

Difference between relativistic petawatt-picosecond laser-plasma interaction and subrelativistic plasma-block generation

Measurements of the ion emission from targets irradiated with neodymium glass and iodine lasers were analyzed and a very significant anomaly observed. The fastest ions with high charge number Z, which usually are of megaelectron volt energy following the relativistic self-focusing and nonlinear-force acceleration theory, were reduced to less than 50 times lower energies when 1.2 ps laser pulses of about 1 J were incident. We clarify this discrepancy by the model of skin depth plasma front interaction in contrast to the relativistic self-focusing with filament generation. This was indicated also from the unique fact that the ion number was independent of the laser intensity. The skin layer theory prescribes prepulse control and lower (near relativistic threshold) laser intensities for nonlinear-force-driven plasma blocks for high-gain ignition similar to light ion beam fusion.

https://www.cambridge.org/core/services/aop-cambridge-core/content/view/S0263034604221164

Li-Hua Cao

Papers

Skin depth plasma front interaction mechanism with prepulse suppression to avoid relativistic self-focusing for high-gain laser fusion