The effects of pH, ionic strength and temperature on sorption of Eu(III) on attapulgite were investigated in the presence and absence of fulvic acid (FA) and humic acid (HA). The results indicated that the sorption of Eu(III) on attapulgite was strongly dependent on pH and ionic strength, and independent of temperature. In the presence of FA/HA, Eu(III) sorption was enhanced at pH 7. The X-ray photoelectron spectroscopy (XPS) analysis suggested that the sorption of Eu(III) might be expressed as ?X3Eu0 ?SwOHEu3+ and ?SOEu-OOC-/HA in the ternary Eu/HA/attapulgite system. The extended X-ray absorption fine structure (EXAFS) analysis of Eu-HA complexes indicated that the distances of d(Eu-O) decreased from 2.451 to 2.360 A with increasing pH from 1.76 to 9.50, whereas the coordination number (N) decreased from ~9.94 to ~8.56. Different complexation species were also found for the different addition sequences of HA and Eu(III) to attapulgite suspension. The results are important to understand the influence of humic substances on Eu(III) behavior in the natural environment.

Sorption of Eu(III) on Attapulgite Studied by Batch, XPS and EXAFS Techniques

Heavy metal contamination has been a serious threat to environment and human health Carbon-based materials, from biochar/activated carbon to modified materials (ie carbon nanotubes-based materials, and graphene-based materials), have been widely studied as efficient adsorbents for the heavy metal removal from aqueous solutions This review discussed the recent achievements in adsorption isotherms, adsorption kinetics and adsorption mechanism according to the existing forms of heavy metals in water The effect of process conditions, such as temperature, pH value, and coexisting ions, on adsorption performance are combed, and the universal guidance law is obtained The physical adsorption, electrostatic interaction, ion exchange, surface complexation, and precipitation/coprecipitation play important roles in heavy metals adsorption process In addition to the common activated carbon(AC), biochar(BC) and the emerging carbon nanotubes(CNTs) and graphene(GN) adsorbent show good development potentials Meanwhile, though the modified carbonaceous materials can achieve high adsorption capacity and removal efficiency of heavy metals, the modification operation is complex, especially chemical modification Acid and alkali solution are often used to regenerate spent materials in desorption, however, further studies of other desorption reagent are really needed This review highlights the removal of heavy metal ions from aqueous solution using carbon-based materials as adsorbents, and discusses the existing deficiencies and suggestions on further study

Removal of heavy metals from aqueous solution using carbon-based adsorbents: A review

Contents: 1. Nuclear Power Development. 2. Natural Radioactivity and Radiation Exposures. 3. Neutron Reactions. 4. Nuclear Fission. 5. Chain Reaction and Nuclear Reactors. 6. Types of Nuclear Reactors. 7. Nuclear Fuel Cycle. 8. Nuclear Waste Disposal: Magnitudes of Waste. 9. Storage and Disposal of Nuclear Wastes. 10. Administrative and Policy Issues in Nuclear Waste Disposal. 11. Nuclear Reactor Safety. 12. Nuclear Reactor Accidents. 13. Reactor Safety and Future Nuclear Reactors. 14. Nuclear Energy and Weapons Proliferation. 15. Costs of Electricity from Nuclear Power. 16. The Prospects for Nuclear Power. Appendices.

Nuclear Energy: Principles, Practices, and Prospects

The removal mechanism of U(VI) on Mg–Al-layered double hydroxide-supported graphene oxide (LDH/GO) composites was investigated by batch, spectroscopic, and surface complexation modeling. The batch experiments showed that the enhanced removal of U(VI) on LDH and LDH/GO composites in the presence of carbonate was observed at pH < 5.0, whereas the presence of carbonate significantly inhibited U(VI) removal at pH starting from 7.0 to 9.0. It is demonstrated that the oxygenated functional groups (i.e., −OH) were responsible for the high effective removal of U(VI) by XPS analysis. The results of XANES and EXAFS spectra indicated that adsorption of U(VI) on LDH/GO composites was inner-sphere surface complexation. According to surface complexation modeling, the removal of U(VI) on LDH/GO composites can be satisfactorily fitted by a diffuse layer model with an ion exchange (X2UO2) and two inner-sphere surface complexes (SOUO2+ and SOUO2(CO3)23– species). The maximum adsorption capacities of LDH and LDH/GO composit...

One-Pot Synthesis of LDH/GO Composites as Highly Effective Adsorbents for Decontamination of U(VI)

Microscopic investigation on the adsorption of lubrication oil on microplastics

The study was undertaken to evaluate the feasibility of oxidized multiwalled carbon nanotube (oxidized MWCNT) for the removal of radiocobalt (60Co) from aqueous solutions. The oxygen functional groups of oxidized MWCNT were characterized by FT-IR and XPS. Batch experiments were performed to study the sorption of cobalt as a function of contact time, solid contents, pH, ionic strength, foreign ions, and temperature. Two kinetic models viz. pseudo-first-order and pseudo-second-order were used to determine kinetic sorption parameters, and the kinetic sorption could be described more favorably by the pseudo-second-order model. The thermodynamic parameters (∆G°, ∆S°, ∆H°) calculated from the temperature-dependent sorption isotherms indicated that the sorption of Co(II) on oxidized MWCNT was an endothermic and spontaneous processes. The results suggest that oxidized MWCNT can be used efficiently in the treatment of industrial effluents containing radioactive and heavy metal ions.

Liang Chen

Papers

Removal of radiocobalt from aqueous solution by oxidized MWCNT