The partitioning of the heat flux supplied at the wall is one of the key issues that needs to be resolved if one is to model subcooled flow boiling accurately. The first step in studying wall heat flux partitioning is to account for the various heat transfer mechanisms involved and to know the location at which the onset of nucleate boiling (ONB) occurs. Active nucleation site density data is required to account for the energy carried away by the bubbles departing from the wall. Subcooled flow boiling experiments were conducted using a flat plate copper surface and a nine-rod (zircalloy-4) bundle. The location of ONB during the experiments was determined from visual observations as well as from the thermocouple output. From the data obtained it is found that the heat flux and wall superheat required for inception are dependent on flow rate, liquid subcooling, and contact angle. The existing correlations for ONB underpredict the wall superheat at ONB in most cases. A correlation for predicting the wall superheat and wall heat flux at ONB has been developed from the data obtained in this study and that reported in the literature. Experimental data are within630 percent of that predicted from the correlation. Active nucleation site density was determined by manually counting the individual sites in pictures obtained using a CCD camera. Correlations for nucleation site density, which are independent of flow rate and liquid subcooling, but dependent on contact angle have been developed for two ranges of wall superheat—one below 15°C and another above 15°C. @DOI: 10.1115/1.1471522#

Onset of Nucleate Boiling and Active Nucleation Site Density During Subcooled Flow Boiling

Providing a comprehensive introduction to the fundamentals and applications of flow and heat transfer in conventional and miniature systems, this fully enhanced and updated edition covers all the topics essential for graduate courses on two-phase flow, boiling, and condensation. Beginning with a concise review of single-phase flow fundamentals and interfacial phenomena, detailed and clear discussion is provided on a range of topics, including two-phase hydrodynamics and flow regimes, mathematical modeling of gas-liquid two-phase flows, pool and flow boiling, flow and boiling in mini and microchannels, external and internal-flow condensation with and without noncondensables, condensation in small flow passages, and two-phase choked flow. Numerous solved examples and end-of-chapter problems that include many common design problems likely to be encountered by students, make this an essential text for graduate students. With up-to-date detail on the most recent research trends and practical applications, it is also an ideal reference for professionals and researchers in mechanical, nuclear, and chemical engineering.

/pdf/two-phase-flow-boiling-and-condensation-in-conventional-and-5aink3qfmk.pdf

Two-phase flow, boiling and condensation in conventional and miniature systems

Critical heat flux

Rationalization of existing mechanistic models for the prediction of water subcooled flow boiling critical heat flux

http://www2.egr.uh.edu/~dli9/2005_ijhmt_onb.pdf

M. Cumo

Papers

Rationalization of existing mechanistic models for the prediction of water subcooled flow boiling critical heat flux

Experimental evaluation of the onset of subcooled flow boiling at high liquid velocity and subcooling

Subcooled water flow boiling CHF with very high heat fluxes

The prediction of the critical heat flux in water-subcooled flow boiling

Heat transfer enhancement by air injection in upward heated mixed-convection flow of water