There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Phd by thesis

Exploration of new superconductors and functional materials, and fabrication of superconducting tapes and wires of iron pnictides

A material that rapidly absorbs molecular oxygen (known as an oxygen scavenger or deoxygenation agent (DOA)) has various industrial applications, such as in food preservation, anticorrosion of metal and coal deoxidation. Given that oxygen is vital to cancer growth, to starve tumours through the consumption of intratumoral oxygen is a potentially useful strategy in fighting cancer. Here we show that an injectable polymer-modified magnesium silicide (Mg2Si) nanoparticle can act as a DOA by scavenging oxygen in tumours and form by-products that block tumour capillaries from being reoxygenated. The nanoparticles are prepared by a self-propagating high-temperature synthesis strategy. In the acidic tumour microenvironment, the Mg2Si releases silane, which efficiently reacts with both tissue-dissolved and haemoglobin-bound oxygen to form silicon oxide (SiO2) aggregates. This in situ formation of SiO2 blocks the tumour blood capillaries and prevents tumours from receiving new supplies of oxygen and nutrients.

Magnesium silicide nanoparticles as a deoxygenation agent for cancer starvation therapy

This review focuses on the superconducting properties of MgB2 that are relevant for power applications. The reversible mixed state parameters are the most important, since they define the limiting conditions for loss-free currents: the transition temperature, the upper critical field and the depairing current. They also determine the flux pinning energy, the pinning force and the elastic properties of the flux line lattice and, therefore, strongly influence the critical current densities. The magnetic properties of magnesium diboride are anisotropic and influenced by the two different energy gaps of the σ- and π-bands. Whereas the transition temperature could not be enhanced significantly during the past five years, the upper critical field was considerably increased by impurity scattering or doping. Flux pinning is very weak in MgB2 single crystals and was only improved by irradiation techniques so far. In polycrystalline samples, grain boundary pinning seems to play the dominant role. High critical currents close to the theoretical limit were found in c-axis oriented thin films. The anisotropy of the upper critical field strongly reduces the critical currents in untextured MgB2 at high magnetic fields, where the supercurrents become highly percolative, since not all grains are superconducting anymore. The performance of polycrystalline wires and tapes was significantly improved during the past few years by increasing the upper critical field and by reducing its anisotropy. Pinning seems to be nearly optimized in many forms of this material, but the connectivity between the grains might be further improved.

https://iopscience.iop.org/article/10.1088/0953-2048/20/12/R01/pdf

Magnetic properties and critical currents of MgB2

Doping of MgB2 by nano-SiC and its potential for the improvement of flux pinning were studied for MgB2−x(SiC)x/2 with x=0, 0.2, and 0.3 and for 10 wt % nano-SiC-doped MgB2 samples. Cosubstitution of B by Si and C counterbalanced the effects of single-element doping, decreasing Tc by only 1.5 K, introducing intragrain pinning centers effective at high fields and temperatures, and significantly enhancing Jc and Hirr. Compared to the undoped sample, Jc for the 10 wt % doped sample increased by a factor of 32 at 5 K and 8 T, 42 at 20 K and 5 T, and 14 at 30 K and 2 T. At 20 K and 2 T, the Jc for the doped sample was 2.4×105 A/cm2, which is comparable to Jc values for the best Ag/Bi-2223 tapes. At 20 K and 4 T, Jc was twice as high as for the best MgB2 thin films and an order of magnitude higher than for the best Fe/MgB2 tapes. The magnetic Jc is consistent with the transport Jc which remains at 20 000 A/cm2 even at 10 T and 5 K for the doped sample, an order of magnitude higher than the undoped one. Because o...

/pdf/enhancement-of-the-critical-current-density-and-flux-pinning-huyv4rsie0.pdf

Enhancement of the critical current density and flux pinning of MgB2 superconductor by nanoparticle SiC doping

Doping of MgB2 by nano-SiC and its potential for improvement of flux pinning was studied for MgB2-x(SiC)x/2 with x = 0, 0.2 and 0.3 and a 10wt% nano-SiC doped MgB2 samples. Co-substitution of B by Si and C counterbalanced the effects of single-element doping, decreasing Tc by only 1.5K, introducing pinning centres effective at high fields and temperatures and enhancing Jc and Hirr significantly. Compared to the non-doped sample, Jc for the 10wt% doped sample increased by a factor of 32 at 5K and 8T, 42 at 20K and 5T, and 14 at 30K and 2T. At 20K, which is considered to be a benchmark operating temperature for MgB2, the best Jc for the doped sample was 2.4x10^5A/cm2 at 2T, which is comparable to Jc of the best Ag/Bi-2223 tapes. At 20K and 4T, Jc was 36,000A/cm2, which was twice as high as for the best MgB2 thin films and an order of magnitude higher than for the best Fe/MgB2 tapes. Because of such high performance, it is anticipated that the future MgB2 conductors will be made using the formula of MgBxSiyCz instead of the pure MgB2.

/pdf/enhancement-of-the-critical-current-density-and-flux-pinning-1ob8ezxe4f.pdf

Resistive transition measurements are reported for MgB2 strands with SiC dopants. The starting Mg powders were 325 mesh 99.9% pure, and the B powders were amorphous, 99.9% pure, and at a typical size of 1–2 μm. The SiC was added as 10 mol % of SiC to 90 mol % of binary MgB2 [(MgB2)0.9(SiC)0.1]. Three different SiC powders were used; the average particle sizes were 200 nm, 30 nm, and 15 nm. The strands were heat treated for times ranging from 5 to 30 min at temperatures from 675 °C to 900 °C. Strands with 200 nm size SiC additions had μ0Hirr and Bc2 which maximized at 25.4 T and 29.7 T after heating at 800 °C for 30 min. The highest values were seen for a strand with 15 nm SiC heated at 725 °C for 30 min which had a μ0Hirr of 29 T and a Bc2 higher than 33 T.

/pdf/large-upper-critical-field-and-irreversibility-field-in-mgb2-3hwrhoq2ne.pdf

Large upper critical field and irreversibility field in MgB2 wires with SiC additions

Resistive transition measurements are reported for Magnesium diboride strands with SiC dopants. The SiC was added as 10 mol of SiC to 90 mol of binary magnesium diboride. Three different SiC powders were used, the average particle sizes were 200 nm, 30 nm, and 15 nm. The strands were heat treated for times ranging from 5 to 30 minutes at temperatures from 675 to 900. Strands with 200 nm size SiC additions had Hirr and Bc2 which maximized at 25.4 T and 29.7 T after heating at 800C for 30 minutes. The highest values were seen for a strand with 15 nm SiC heated at 725C for 30 minutes which had a Hirr of 29 T and a Bc2 higher than 33 T

/pdf/large-upper-critical-field-and-irreversibility-field-in-mgb2-4bs9c4xdtd.pdf

Large Upper Critical Field and Irreversibility Field in MgB2 wires with SiC additions

We report a systematic study on the effect of sintering temperature on the phase formation, critical current density, upper critical field and irreversibility field of nanoscale SiC doped MgB2. Bulk and Fe sheathed wires doped with different nano-SiC particle sizes have been made and heat treated at temperatures ranging from 580 to 1000 °C. A systematic correlation between the sintering temperature, normal state resistivity, RRR, Jc, Hc2, and Hirr has been found in all samples of each batch. Samples sintered at a lower temperature have a very fine and well consolidated grain structure while samples sintered at a high temperature contain large grains with easily distinguishable grain boundaries. Low temperature sintering resulted in a higher concentration of impurity precipitates, larger resistivity, higher Jc up to 15 T and lower Tc values. These samples show higher Hc2 and Hirr at T near Tc but lower Hc2 near T = 0 than samples sintered at high temperature. It is proposed that huge local strains produced by nano-precipitates and grain boundary structure are the dominant mechanism responsible for higher Hc2 at T near Tc. However, higher impurity scattering due to C substitution is responsible for higher Hc2 in the low temperature regime for samples sintered at a higher temperature. In addition to high Hc2, it is also proposed that the large number of nano-impurities serve as pinning centres and improve the flux pinning, resulting in higher Jc values at high magnetic fields up to 15 T.

http://iopscience.iop.org/article/10.1088/0953-2048/18/5/013/pdf

M.J. Tomsic

Papers

Enhancement of the critical current density and flux pinning of MgB2 superconductor by nanoparticle SiC doping

Enhancement of the critical current density and flux pinning of MgB2 superconductor by nanoparticle SiC doping

Large upper critical field and irreversibility field in MgB2 wires with SiC additions

Large Upper Critical Field and Irreversibility Field in MgB2 wires with SiC additions

High transport critical current density and large Hc2 and Hirr in nanoscale SiC doped MgB2 wires sintered at low temperature