Showing papers by "Marta Królikowska published in 2012"
TL;DR: The results indicate that the interactions of thiocyanate ILs with water is not as strong as with alcohols, which is shown by the positive/slightly negative excess molar volumes in these binary systems.
Abstract: Densities and viscosities have been determined for binary mixtures of the ionic liquids (ILs) 1-butyl-3-methylimidazolium thiocyanate [BMIM][SCN], or 1-butyl-4-methylpyridinium thiocyanate [BMPy][SCN], or 1-butyl-1-methylpyrrolidinium thiocyanate [BMPYR][SCN], or 1-butyl-1-methylpiperidinium thiocyanate [BMPIP][SCN] with water over wide range of temperatures (298.15–348.15) K and ambient pressure. The thermal properties of [BMPy][SCN], i.e. glass transition temperature and the heat capacity at glass transition, have been measured using a differential scanning microcalorimetry, DSC. The decomposition of [BMPy][SCN] was detected. The density and viscosity correlations for these systems have been made using an empirical second-order polynomial and by the Vogel–Fulcher–Tammann equation, respectively. The concentration dependences have been described by polynomials. The excess molar volumes and deviations in viscosity have been calculated from the experimental values and were correlated by Redlich–Kister polynomial expansions. The variations of these parameters, with compositions of the mixtures and temperature, have been discussed in terms of molecular interactions. A qualitative analysis of the trend of properties with composition and temperature was performed. Further, the excess partial molar volumes, $V_{1}^{\mathrm{E}}$
and $V_{2}^{\mathrm{E}}$
, were calculated and discussed. The isobaric expansivities (coefficient of thermal expansion), α, and the excess isobaric expansivities, α
E, were determined for four ILs and their mixtures with water. The results indicate that the interactions of thiocyanate ILs with water is not as strong as with alcohols, which is shown by the positive/slightly negative excess molar volumes in these binary systems.
89 citations
TL;DR: In this article, the densities of pure thiocyanate-based ionic liquids were determined using a vibrating tube densimeter over the temperature range from T = −298.15 −338.15 K and pressure p = −0.1 −10 MPa.
71 citations
TL;DR: In this article, the binary mixtures containing the ionic liquid N-hexylisoquinolinium thiocyanate, [HiQuin][SCN] and water were considered as a new working pair for absorption refrigeration.
28 citations
TL;DR: Liquid-liquid phase equilibria (LLE) of binary mixtures containing a room-temperature ionic liquid N-hexylisoquinolinium thiocyanate with an aliphatic hydrocarbon with an aromatic hydrocarbon, cyclohexane, thiophene, water, and 1-alcohol have been determined using a dynamic method from room temperature to the boiling-point of the solvent at ambient pressure.
Abstract: Liquid-liquid phase equilibria (LLE) of binary mixtures containing a room-temperature ionic liquid N-hexylisoquinolinium thiocyanate, [HiQuin][SCN] with an aliphatic hydrocarbon (n-hexane, n-heptane), aromatic hydrocarbon (benzene, toluene, ethylbenzene, n-propylbenzene), cyclohexane, thiophene, water, and 1-alcohol (1-ethanol, 1-butanol, 1-hexanol, 1-octanol, 1-decanol) have been determined using a dynamic method from room temperature to the boiling-point of the solvent at ambient pressure. N-hexylisoquinolinium thiocyanate, [HiQuin][SCN] has been synthesized from N-hexyl-isoquinolinium bromide as a substrate. Specific basic characterization of the new compound including NMR spectra, elementary analysis, and water content have been done. The density and viscosity of pure ionic liquid were determined over a wide temperature range from 298.15 to 348.15 K. The mutual immiscibility with an upper critical solution temperature (UCST) for the binary systems {IL + aliphatic hydrocarbon, cyclohexane, or water} was detected. In the systems of {IL + aromatic hydrocarbon or thiophene} an immiscibility gap with a lower critical solution temperature (LCST) was observed. Complete miscibility in the liquid phase, over a whole range of ionic liquid mole fraction, was observed for the binary mixtures containing IL and an 1-alcohol. For the tested binary systems with immiscibility gap {IL + aliphatic hydrocarbon, aromatic hydrocarbon, cyclohexane, thiophene, or water}, the parameters of the LLE correlation have been derived using the NRTL equation. The basic thermal properties of the pure IL, that is, the glass-transition temperature as well as the heat capacity at the glass-transition temperature, have been measured using a differential scanning microcalorimetry technique (DSC). Decomposition of the IL was detected by simultaneous thermogravimetric/differential thermal analysis (TG/DTA) experiments.
24 citations