For high-temperature JET and TFTR discharges, electron cyclotron emission (ECE) measurements of central electron temperature were systematically found to be up to 20% higher than those taken with Thomson scattering. In recent high-performance JET discharges, central Te measurements, performed with LIDAR Thomson scattering and the X-mode ECE interferometer, have been studied in a large database, including deuterium (DD), and deuterium-tritium plasmas (DT). Discrepancies between Te measurements have been observed outside of the experimental uncertainties. ECE measurements, at high Te, have been found to be higher or lower than those of LIDAR, depending on the specific plasma scenario. In addition, discrepancies between the peaks of the second and third harmonic ranges of the ECE spectrum have been interpreted as evidence for the presence of non-Maxwellian features in the electron distribution function. These comparisons seem to suggest that such features can be found in most of the high-performance scenarios selected in this JET database.

/pdf/investigation-of-te-measurements-discrepancies-between-ece-3fp0mg2x.pdf

Investigation of Te measurements discrepancies between ECE and Thomson diagnostics in high-performance plasmas in JET

LIBS characterization of the Frascati Tokamak Upgrade (FTU) limiter tiles after the experimental campaign with fusion plasma

Recent experiments performed in JET at high level of plasma heating, in preparation of, and during the DT campaign have shown significant discrepancies between electron temperature measurements by Thomson Scattering (TS) and Electron Cyclotron Emission (ECE). In order to perform a systematic analysis of this phenomenon, a simple model of bipolar distortion of the electron distribution function has been developed, allowing analytic calculation of the EC emission and absorption coefficients. Extensive comparisons of the modelled ECE spectra (at both the 2nd and the 3rd harmonic extraordinary mode) with experimental measurements display good agreement when bulk electron distribution distortions around 1-2 times the electron thermal velocity are used and prove useful for a first level of analysis of this effect.

/pdf/a-model-of-non-maxwellian-electron-distribution-function-for-1557i2pv.pdf

A model of non-Maxwellian electron distribution function for the analysis of ECE data in JET discharges

Plasma diagnostics techniques for thermonuclear fusion reactors

Abstract Since the 2018 IAEA FEC Conference, FTU operations have been devoted to several experiments covering a large range of topics, from the investigation of the behaviour of a liquid tin limiter to the runaway electrons mitigation and control and to the stabilization of tearing modes by electron cyclotron heating and by pellet injection. Other experiments have involved the spectroscopy of heavy metal ions, the electron density peaking in helium doped plasmas, the electron cyclotron assisted start-up and the electron temperature measurements in high temperature plasmas. The effectiveness of the laser induced breakdown spectroscopy system has been demonstrated and the new capabilities of the runaway electron imaging spectrometry system for in-flight runaways studies have been explored. Finally, a high resolution saddle coil array for MHD analysis and UV and SXR diamond detectors have been successfully tested on different plasma scenarios. 

https://iopscience.iop.org/article/10.1088/1741-4326/ac1802/pdf

Martin Reczko

Papers

Overview of the FTU results