scispace - formally typeset
Search or ask a question

Showing papers by "Maurizio Volpe published in 2018"


Journal ArticleDOI
01 Dec 2018-Fuel
TL;DR: In this article, the authors demonstrate the impact of processing conditions on the formation and composition of hydrochars and secondary char of municipal solid waste (OFMSW) and demonstrate that the secondary char is extractable with organic solvents and is comprised predominantly of organic acids, furfurals and phenols.

184 citations


Journal ArticleDOI
TL;DR: X-ray diffraction, thermogravimetric data, microscopy and inductively coupled plasma mass spectrometry suggest that calcium oxalate in the raw biomass remains in the hydrochar; at higher temperatures, the mineral decomposes into CO2 and may catalyze char/tar decomposition.

130 citations


Journal ArticleDOI
TL;DR: This study reports the implications of using spent coffee hydrochar as substrate for anaerobic digestion (AD) processes by investigating their biomethane potential in AD process inoculated with cow manure.

96 citations


Journal ArticleDOI
TL;DR: Energy characterisation (HHV, TGA), ATR-FTIR analysis, fouling index evaluation and pelletisation results suggested that olive mill waste hydrochars could be used as energy dense and mechanical stable bio-fuels.

80 citations


Journal ArticleDOI
TL;DR: In this article, pyrolyzing a model MSW stream at 408°C, the peak mass loss rate pyrolysis temperature, was compared to pyrolynzing at 900°C.

57 citations


Journal ArticleDOI
TL;DR: In this article, the authors designed and constructed in-house a 2 L batch reactor equipped with four thermocouples, placed at different heights inside the reactor and capable of withstand pressures up to 140 bar and temperatures up to 300 °C.
Abstract: HydroThermal Carbonization (HTC) is a thermochemical process capable of converting wet biomass into a carbon-enriched solid, commonly referred to as hydrochar. Hydrochar finds application as bio-fuel, soil improver and for the production of carbon-advanced materials. In recent years, interest in HTC technology has grown significantly, in terms of both scientific research and industrial development. The HTC process consists of several reactions occurring both in series and in parallel: hydrolysis, dehydration, decarboxylation, condensation, aromatization, and others. Some reactions are known to be exothermic, while others are endothermic. Knowing the enthalpy of the “whole” HTC reaction would be beneficial in terms of both process design and energy calculations, in particular to evaluate the process heat duty. Unfortunately, such kind of information is barely available in the literature: some data have been obtained at the “micro-scale” using differential scanning calorimetry (DSC), with the limits of using a few milligrams of (usually heterogeneous) biomass per trial, while punctual data at larger scale are actually missing. In order to fill this gap, we designed and constructed in-house a 2 L batch reactor equipped with four thermocouples - placed at different heights inside the reactor - and capable to withstand pressures up to 140 bar and temperatures up to 300 °C. The reactor, controlled in temperature, is heated by four electrical resistances (1 kW each) and thermally insulated. An electric power meter allows monitoring and recording the electrical consumption during HTC trials.Thermal trials were performed with the bench-scale reactor fed with only water to provide a baseline for calculations. HTC trials were then performed using biomasses, namely organic fraction of municipal solid waste and agave pulp. At the different HTC operating conditions investigated (residence time: 3 h; reactor filling degree: 67 %; temperatures: 180, 220, and 250 °C; dry biomass to water ratio: 0.10 and 0.15), our data testify that the “whole” HTC reaction is exothermic, and the heat released by the reaction increases with temperature. The design of such a reactor and the data obtained so far encourage an in-depth analysis of the enthalpy of the HTC reaction for different biomasses and at various operating conditions.

38 citations


Journal ArticleDOI
TL;DR: In this paper, the decomposition of hemicellulose and cellulose were visible in the acquired hyperspectral images even without image calibration Image regression based on sample holocellulose, glucan and the sum of xylan, galactan, arabinan and mannan provided good calibration models and enabled visualizing the polysaccharide contents of biomass and biomass-derived chars.

37 citations