BACKGROUND With a rising global population, increasing energy demands, and impending climate change, major concerns have been raised over the security of our energy future. Developing sustainable, fossil-free pathways to produce fuels and chemicals of global importance could play a major role in reducing carbon dioxide emissions while providing the feedstocks needed to make the products we use on a daily basis. One prospective goal is to develop electrochemical conversion processes that can convert molecules in the atmosphere (e.g., water, carbon dioxide, and nitrogen) into higher-value products (e.g., hydrogen, hydrocarbons, oxygenates, and ammonia) by coupling to renewable energy. Electrocatalysts play a key role in these energy conversion technologies because they increase the rate, efficiency, and selectivity of the chemical transformations involved. Today’s electrocatalysts, however, are inadequate. The grand challenge is to develop advanced electrocatalysts with the enhanced performance needed to enable widespread penetration of clean energy technologies. ADVANCES Over the past decade, substantial progress has been made in understanding several key electrochemical transformations, particularly those that involve water, hydrogen, and oxygen. The combination of theoretical and experimental studies working in concert has proven to be a successful strategy in this respect, yielding a framework to understand catalytic trends that can ultimately provide rational guidance toward the development of improved catalysts. Catalyst design strategies that aim to increase the number of active sites and/or increase the intrinsic activity of each active site have been successfully developed. The field of hydrogen evolution, for example, has seen important breakthroughs over the years in the development of highly active non–precious metal catalysts in acid. Notable advancements have also been made in the design of oxygen reduction and evolution catalysts, although there remains substantial room for improvement. The combination of theory and experiment elucidates the remaining challenges in developing further improved catalysts, often involving scaling relations among reactive intermediates. This understanding serves as an initial platform to design strategies to circumvent technical obstacles, opening up opportunities and approaches to develop higher-performance electrocatalysts for a wide range of reactions. OUTLOOK A systematic framework of combining theory and experiment in electrocatalysis helps to uncover broader governing principles that can be used to understand a wide variety of electrochemical transformations. These principles can be applied to other emerging and promising clean energy reactions, including hydrogen peroxide production, carbon dioxide reduction, and nitrogen reduction, among others. Although current paradigms for catalyst development have been helpful to date, a number of challenges need to be successfully addressed in order to achieve major breakthroughs. One important frontier, for example, is the development of both experimental and computational methods that can rapidly elucidate reaction mechanisms on broad classes of materials and in a wide range of operating conditions (e.g., pH, solvent, electrolyte). Such efforts would build on current frameworks for understanding catalysis to provide the deeper insights needed to fine-tune catalyst properties in an optimal manner. The long-term goal is to continue improving the activity and selectivity of these catalysts in order to realize the prospects of using renewable energy to provide the fuels and chemicals that we need for a sustainable energy future.

/pdf/combining-theory-and-experiment-in-electrocatalysis-insights-3l4yblici7.pdf

Combining theory and experiment in electrocatalysis: Insights into materials design

Owing to the increasing emissions of carbon dioxide (CO2), human life and the ecological environment have been affected by global warming and climate changes. To mitigate the concentration of CO2 in the atmosphere various strategies have been implemented such as separation, storage, and utilization of CO2. Although it has been explored for many years, hydrogenation reaction, an important representative among chemical conversions of CO2, offers challenging opportunities for sustainable development in energy and the environment. Indeed, the hydrogenation of CO2 not only reduces the increasing CO2 buildup but also produces fuels and chemicals. In this critical review we discuss recent developments in this area, with emphases on catalytic reactivity, reactor innovation, and reaction mechanism. We also provide an overview regarding the challenges and opportunities for future research in the field (319 references).

Recent advances in catalytic hydrogenation of carbon dioxide

ion. The oxidative addition mechanism was originally proposed22i because of the lack of a strong rate dependence on polar factors and on the acidity of the medium. Later, however, the electrophilic substitution mechanism also was proposed. Recently, the oxidative addition mechanism was confirmed by investigations into the decomposition and protonolysis of alkylplatinum complexes, which are the reverse of alkane activation. There are two routes which operate in the decomposition of the dimethylplatinum(IV) complex Cs2Pt(CH3)2Cl4. The first route leads to chloride-induced reductive elimination and produces methyl chloride and methane. The second route leads to the formation of ethane. There is strong kinetic evidence that the ethane is produced by the decomposition of an ethylhydridoplatinum(IV) complex formed from the initial dimethylplatinum(IV) complex. In D2O-DCl, the ethane which is formed contains several D atoms and has practically the same multiple exchange parameter and distribution as does an ethane which has undergone platinum(II)-catalyzed H-D exchange with D2O. Moreover, ethyl chloride is formed competitively with H-D exchange in the presence of platinum(IV). From the principle of microscopic reversibility it follows that the same ethylhydridoplatinum(IV) complex is the intermediate in the reaction of ethane with platinum(II). Important results were obtained by Labinger and Bercaw62c in the investigation of the protonolysis mechanism of several alkylplatinum(II) complexes at low temperatures. These reactions are important because they could model the microscopic reverse of C-H activation by platinum(II) complexes. Alkylhydridoplatinum(IV) complexes were observed as intermediates in certain cases, such as when the complex (tmeda)Pt(CH2Ph)Cl or (tmeda)PtMe2 (tmeda ) N,N,N′,N′-tetramethylenediamine) was treated with HCl in CD2Cl2 or CD3OD, respectively. In some cases H-D exchange took place between the methyl groups on platinum and the, CD3OD prior to methane loss. On the basis of the kinetic results, a common mechanism was proposed to operate in all the reactions: (1) protonation of Pt(II) to generate an alkylhydridoplatinum(IV) intermediate, (2) dissociation of solvent or chloride to generate a cationic, fivecoordinate platinum(IV) species, (3) reductive C-H bond formation, producing a platinum(II) alkane σ-complex, and (4) loss of the alkane either through an associative or dissociative substitution pathway. These results implicate the presence of both alkane σ-complexes and alkylhydridoplatinum(IV) complexes as intermediates in the Pt(II)-induced C-H activation reactions. Thus, the first step in the alkane activation reaction is formation of a σ-complex with the alkane, which then undergoes oxidative addition to produce an alkylhydrido complex. Reversible interconversion of these intermediates, together with reversible deprotonation of the alkylhydridoplatinum(IV) complexes, leads to multiple H-D exchange

Activation of c-h bonds by metal complexes

II. Structure of Perovskites 1982 A. Crystal Structure 1982 B. Nonstoichiometry in Perovskites 1983 1. Oxygen Nonstoichiometry 1983 2. Cation Nonstoichiometry 1984 C. Physical Properties 1985 D. Adsorption Properties 1986 1. CO and NO Adsorption 1986 2. Oxygen Adsorption 1987 E. Specific Surface and Porosity 1987 F. Thermal Stability in a Reducing Atmosphere 1989 III. Acid−Base and Redox Properties 1990 A. Acidity and Basicity 1990 B. Redox Processes 1991 1. Kinetics and Mechanisms 1992 2. Reduction−Oxidation Cycles 1993 C. Ion Mobility 1993 1. Oxygen Transport 1993 2. Cation Transport 1994 IV. Heterogeneous Catalysis 1995 A. Oxidation Reactions 1995 1. CO Oxidation 1995 2. Oxidation of Hydrocarbons 1996 B. Pollution Abatement 2001 1. NOx Decomposition 2001 2. Exhaust Treatment 2002 3. Stability 2004 C. Hydrogenation and Hydrogenolysis Reactions 2004 1. Hydrogenation of Carbon Oxides 2004 2. Hydrogenation and Hydrogenolysis Reactions 2006

Chemical structures and performance of perovskite oxides.

In this review the phenomenon of proton conductivity in materials and the elements of proton conduction mechanismsproton transfer, structural reorganization and diffusional motion of extended moietiesare discussed with special emphasis on proton chemistry. This is characterized by a strong proton localization within the valence electron density of electronegative species (e.g., oxygen, nitrogen) and self-localization effects due to solvent interactions which allows for significant proton diffusivities only when assisted by the dynamics of the proton environment in Grotthuss and vehicle type mechanisms. In systems with high proton density, proton/proton interactions lead to proton ordering below first-order phase transition rather than to coherent proton transfers along extended hydrogen-bond chains as is frequently suggested in textbooks of physical chemistry. There is no indication for significant proton tunneling in fast proton conduction phenomena for which almost barrierless proton transfer is suggest...

Proton Conductivity: Materials and Applications

Ammonia was synthesized from its elements at atmospheric pressure in a solid state proton (H+)-conducting cell-reactor. Hydrogen was flowing over the anode and was converted into protons that were transported through the solid electrolyte and reached the cathode (palladium) over which nitrogen was passing. At 570 degreesC and atmospheric pressure, greater than 78 percent of the electrochemically supplied hydrogen was converted into ammonia. The thermodynamic requirement for a high-pressure process is eliminated.

https://science.sciencemag.org/content/sci/282/5386/98.full.pdf

Michael Stoukides

Papers

Ammonia Synthesis at Atmospheric Pressure

Progress in the Electrochemical Synthesis of Ammonia

An Electrochemical Haber-Bosch Process

The effect of electrochemical oxygen pumping on the rate and selectivity of ethylene oxidation on polycrystalline silver

Electrocatalytic synthesis of ammonia from steam and nitrogen at atmospheric pressure