Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Fast parallel algorithms for short-range molecular dynamics

抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

MKT 6009 Marketing Internship (0 semester credit hours) Student gains experience and improves skills through appropriate developmental work assignments in a real business environment. Student must identify and submit specific business learning objectives at the beginning of the semester. The student must demonstrate exposure to the managerial perspective via involvement or observation. At semester end, student prepares an oral or poster presentation, or a written paper reflecting on the work experience. Student performance is evaluated by the work supervisor. Pass/Fail only. Prerequisites: (MAS 6102 or MBA major) and department consent required. (0-0) S MKT 6244 Digital Marketing Strategy (2 semester credit hours) Executive Education Course. The course explores three distinct areas within marketing and sales namely, digital marketing, traditional sales prospecting, and executive sales organization and strategy. The continuing convergence of the digital marketing and sales funnels has created a strategic continuum from digital lead generation to digital sales. The course identifies the current composition of this digital continuum while providing opportunities to evaluate sales and marketing digital strategies. Prerequisites: MKT 6301 and instructor consent required. (2-0) Y MKT 6301 (SYSM 6318) Marketing Management (3 semester credit hours) Overview of marketing management methods, principles and concepts including product, pricing, promotion and distribution decisions as well as segmentation, targeting and positioning. (3-0) S MKT 6309 Marketing Data Analysis and Research (3 semester credit hours) Methods employed in market research and data analysis to understand consumer behavior, customer journeys, and markets so as to enable better decision-making. Topics include understanding different sources of data, survey design, experiments, and sampling plans. The course will cover the techniques used for market sizing estimation and forecasting. In addition, the course will cover the foundational concepts and techniques used in data visualization and \"story-telling\" for clients and management. Corequisites: MKT 6301 and OPRE 6301. (3-0) Y MKT 6310 Consumer Behavior (3 semester credit hours) An exposition of the theoretical perspectives of consumer behavior along with practical marketing implication. Study of psychological, sociological and behavioral findings and frameworks with reference to consumer decision-making. Topics will include the consumer decision-making model, individual determinants of consumer behavior and environmental influences on consumer behavior and their impact on marketing. Prerequisite: MKT 6301. (3-0) Y MKT 6321 Interactive and Digital Marketing (3 semester credit hours) Introduction to the theory and practice of interactive and digital marketing. Topics covered include: online-market research, consumer behavior, conversion metrics, and segmentation considerations; ecommerce, search and display advertising, audiences, search engine marketing, email, mobile, video, social networks, and the Internet of Things. (3-0) T MKT 6322 Internet Business Models (3 semester credit hours) Topics to be covered are: consumer behavior on the Internet, advertising on the Internet, competitive strategies, market research using the Internet, brand management, managing distribution and supply chains, pricing strategies, electronic payment systems, and developing virtual organizations. Further, students learn auction theory, web content design, and clickstream analysis. Prerequisite: MKT 6301. (3-0) Y MKT 6323 Database Marketing (3 semester credit hours) Techniques to analyze, interpret, and utilize marketing databases of customers to identify a firm's best customers, understanding their needs, and targeting communications and promotions to retain such customers. Topics

Marketing for management.

Worldwide commercial interest in carbon nanotubes (CNTs) is reflected in a production capacity that presently exceeds several thousand tons per year. Currently, bulk CNT powders are incorporated in diverse commercial products ranging from rechargeable batteries, automotive parts, and sporting goods to boat hulls and water filters. Advances in CNT synthesis, purification, and chemical modification are enabling integration of CNTs in thin-film electronics and large-area coatings. Although not yet providing compelling mechanical strength or electrical or thermal conductivities for many applications, CNT yarns and sheets already have promising performance for applications including supercapacitors, actuators, and lightweight electromagnetic shields.

/pdf/carbon-nanotubes-present-and-future-commercial-applications-1nhq3xy4hh.pdf

Carbon Nanotubes: Present and Future Commercial Applications

Department of Materials Science, University of Patras, 26504 Rio Patras, Greece, Theoretical and Physical Chemistry Institute, National Hellenic Research Foundation, 48 Vass. Constantinou Avenue, 116 35 Athens, Greece, Institut de Biologie Moleculaire et Cellulaire, UPR9021 CNRS, Immunologie et Chimie Therapeutiques, 67084 Strasbourg, France, and Dipartimento di Scienze Farmaceutiche, Universita di Trieste, Piazzale Europa 1, 34127 Trieste, Italy

Chemistry of Carbon Nanotubes

The progress of Mobile Banking (M-banking) is unsatisfactory in terms of achieving a key objective, i.e. to reach the inaccessible unbanked customers at an affordable cost for financial inclusion. We identify the causes to this problem through the investigating the factors affecting the adoption of m-banking in remote areas of Bangladesh using a 236 primary sample of m-bank customers from seven geographical locations and across professions. We document a positive effect of perceived ease of use, trusts, and perceived usefulness, and a negative effect of user interface on adopting m-banking in rural Bangladesh. our findings provides significant policy implications for policy planners and the bank managers to enrich their policies and strategies for promoting financial inclusion as well as successful banking business in rural of Bangladesh.

/pdf/banking-access-for-the-poor-adoption-and-strategies-in-rural-3e4lznon23.pdf

Banking access for the poor: Adoption and strategies in rural areas of Bangladesh

Characterization of the structure and properties of processed alumina-graphene and alumina-zirconia composites

Objective: The medicinal values of Nigella sativa have been mentioned in ancient literature as useful in disorders of inflammation. The present study investigates the anti-inflammatory and analgesic activities of methanol extract of Nigella sativa seed during different phases of its germination on Wistar rats. Methods: Seeds of N. sativa were grown in vitro in glass petri plates using multiple folds of damp filter paper. Complete plantlet with two leaves was obtained in 11 days. The acute anti-inflammatory activity of N. sativa extracts during different phases of germination was measured plethysmographically using kaolin as inflammatory agent, analgesic activity was measured by hot plate method, keeping indomethacin (10mg/kg b.w) as reference standard in both tests. Results: All tested extracts of N. sativa (1gm/kg b.w) during different phases of germination showed significant reduction in paw oedema in comparison to control (P<0.001) in anti-inflammatory test and showed significant increased (P<0.001) in the reaction time on hot plate during analgesic test. Extract of 5th day germination showed significant anti-inflammatory and analgesic effect among the all tested extracts. Conclusion: It may be concluded that extracts of N. sativa possess enhanced anti-inflammatory and analgesic activities during germination as compared to seed extract. High metabolic activity and higher contents of secondary metabolites expressed during germination might be responsible for this activity.

In vivo evaluation of anti-inflammatory and analgesic activities of nigella sativa seed during germination

Semi-rigid and rigid structures have been utilized in many on-body applications including musculoskeletal support (e.g., braces and splints). However, most of these support structures are not very compliant, so effortless custom fitting becomes a unique design challenge. Furthermore, the weight and space needed to transport these structures impede adoption in mobile environments. Here, we introduce ExoForm, a compact, customizable, and semi-rigid wearable material system with self-fusing edges that can semi-autonomously assemble on-demand while providing integrated sensing, control, and mobility. We present a comprehensive and holistic engineering strategy that includes optimized material composition, computationally-guided design and fabrication, semi-autonomous self-morphing assembly and fusing steps, heating control, and sensing for our easy-to-wear ExoForm. Finally, we fabricate wearable braces using the ExoForm method as a demonstration along with preliminary evaluation of ExoForm's performance.

ExoForm: Shape Memory and Self-Fusing Semi-Rigid Wearables

Cadmium sulfide (CdS) and aluminum-doped zinc oxide (Al:ZnO) thin films are used as buffer layer and front window layer, respectively, in thin film solar cells. CdS and Al:ZnO thin films were produced using chemical bath deposition (CBD) and sol–gel technique, respectively. For CBD CdS, the effect of bath composition and temperature, dipping time and annealing temperature on film properties was investigated. The CdS films are found to be polycrystalline with metastable cubic crystal structure, dense, crack-free surface morphology and the crystallite size of either few nanometers or 12–17 nm depending on bath composition. In case of CdS films produced with 1:2 ratio of Cd and S precursors, spectrophotometer studies indicate quantum confinement effect, owing to extremely small crystallite size, with an increase in Eg value from 2.42 eV (for bulk CdS) to ~ 3.76 eV along with a shift in the absorption edge toward ~ 330 nm wavelength. The optimum annealing temperature is 400°C beyond which film properties deteriorate through S evaporation and CdO formation. On the other hand, Al:ZnO films prepared via spin coating of precursor sols containing 0.90–1.10 at.% Al show that, with an increase in Al concentration, the average grain size increases from 28 nm to 131 nm with an associated decrease in root-mean-square roughness. The minimum value of electrical resistivity, measured for the films prepared using 0.95 at.% Al in the precursor sol, is ~ 2.7 × 10-4 Ω ⋅ cm. The electrical resistivity value rises upon further increase in Al doping level due to introduction of lattice defects and Al segregation to the grain boundary area, thus limiting electron transport through it.

/pdf/solution-processing-of-cadmium-sulfide-buffer-layer-and-uick5ed4i9.pdf

Mohammad Islam

Papers

Banking access for the poor: Adoption and strategies in rural areas of Bangladesh

Characterization of the structure and properties of processed alumina-graphene and alumina-zirconia composites

In vivo evaluation of anti-inflammatory and analgesic activities of nigella sativa seed during germination

ExoForm: Shape Memory and Self-Fusing Semi-Rigid Wearables

Solution processing of cadmium sulfide buffer layer and aluminum-doped zinc oxide window layer for thin films solar cells