Disruptions in ITER and strategies for their control and mitigation

An overview of the present status of research toward the final design of the ITER disruption mitigation system (DMS) is given. The ITER DMS is based on massive injection of impurities, in order to radiate the plasma stored energy and mitigate the potentially damaging effects of disruptions. The design of this system will be extremely challenging due to many physics and engineering constraints such as limitations on port access and the amount and species of injected impurities. Additionally, many physics questions relevant to the design of the ITER disruption mitigation system remain unsolved such as the mechanisms for mixing and assimilation of injected impurities during the rapid shutdown and the mechanisms for the subsequent formation and dissipation of runaway electron current.

https://publications.lib.chalmers.se/records/fulltext/207054/local_207054.pdf

Status of research toward the ITER disruption mitigation system

/pdf/physics-of-runaway-electrons-in-tokamaks-53zgw20f64.pdf

Physics of runaway electrons in tokamaks

Disruptions are a critical issue for ITER because of the high thermal and magnetic energies that are released on short timescales, which results in extreme forces and heat loads. The choice of material of the plasma-facing components (PFCs) can have significant impact on the loads that arise during a disruption. With the ITER-like wall (ILW) in JET made of beryllium in the main chamber and tungsten in the divertor, the main finding is a low fraction of radiation. This has dropped significantly with the ILW from 50?100% of the total energy being dissipated during disruptions in CFC wall plasmas, to less than 50% on average and down to just 10% for vertical displacement events (VDEs). All other changes in disruption properties and loads are consequences of this low radiation: long current quenches (CQs), high vessel forces caused by halo currents and toroidal current asymmetries as well as severe heat loads. Temperatures close to the melting limit have been locally observed on upper first wall structures during deliberate VDE and even at plasma currents as low as 1.5 MA and thermal energy of about 1.5?MJ only. A high radiation fraction can be regained by massive injection of a mixture of 10% Ar with 90% D2. This accelerates the CQ thus reducing the halo current and sideways impulse. The temperature of PFCs stays below 400??C. MGI is now a mandatory tool to mitigate disruptions in closed-loop operation for currents at and above 2.5?MA in JET.

/pdf/impact-and-mitigation-of-disruptions-with-the-iter-like-wall-f8b9qpgclp.pdf

Impact and mitigation of disruptions with the ITER-like wall in JET

Disruptions are a major operational concern for next generation tokamaks, including ITER. They may generate excessive heat loads on plasma facing components, large electromagnetic forces in the machine structures and several MA of multi-MeV runaway electrons. A more complete understanding of the runaway generation processes and methods to suppress them is necessary to ensure safe and reliable operation of future tokamaks. Runaway electrons were studied at JET-ILW showing that their generation dependencies (accelerating electric field, avalanche critical field, toroidal field, MHD fluctuations) are in agreement with current theories. In addition, vertical stability plays a key role in long runaway beam formation. Energies up to 20 MeV are observed. Mitigation of an incoming runaway electron beam triggered by massive argon injection was found to be feasible provided that the injection takes place early enough in the disruption process. However, suppressing an already accelerated runaway electron beam in the MA range was found to be difficult even with injections of more than 2 kPa.m3 high-Z gases such as krypton or xenon. This may be due to the presence of a cold background plasma weakly coupled to the runaway electron beam which prevents neutrals from penetrating in the electron beam core. Following unsuccessful mitigation attempts, runaway electron impacts on beryllium plasma-facing components were observed, showing localized melting with toroidal asymmetries.

https://iopscience.iop.org/article/10.1088/0029-5515/55/9/093013/pdf

Runaway electron beam generation and mitigation during disruptions at JET-ILW

Disruption mitigation is mandatory for ITER in order to reduce forces, to mitigate heat loads during the thermal quench and to avoid runaway electrons (REs). A fast disruption mitigation valve has been installed at JET to study mitigation by massive gas injection. Different gas species and amounts have been investigated with respect to timescales and mitigation efficiency. We discuss the mitigation of halo currents as well as sideways forces during vertical displacement events, the mitigation of heat loads by increased energy dissipation through radiation, the heat loads which could arise by asymmetric radiation and the suppression of REs.

/pdf/disruption-mitigation-by-massive-gas-injection-in-jet-ra3xd86li0.pdf

N. Baumgarten

Papers

Disruption mitigation by massive gas injection in JET