This thesis explores transport phenomena in nanochannels on a chip. Fundamental nanofluidic ionic studies form the basis for novel separation and preconcentration applications for proteomic purposes. The measurements were performed with 50-nm-high 1D nanochannels, which are easily accessible from both sides by two microchannels. Nanometer characteristic apertures were manufactured in the bonded structure of Pyrex-amorphous silicon – Pyrex, in which the thickness of the amorphous silicon layer serves as a spacer to define the height of the nanochannels. The geometry of the nanometer-sized apertures is well defined, which simplifies the modeling of the transport across them. Compared to biological pores, the present nanochannels in Pyrex offer increased stability. Fundamental characteristics of nanometer-sized apertures were obtained by impedance spectroscopy measurements of the nanochannel at different ionic strengths and pH values. A conductance plateau (on a log-log scale) was modeled and measured, establishing due to the dominance of the surface charge density in the nanochannels, which induces an excess of mobile counterions to maintain electroneutrality. The nanochannel conductance can be regulated at low ionic strengths by pH adjustment, and by an external voltage applied on the chip to change the zeta potential. This field-effect allows the regulation of ionic flow which can be exploited for the fabrication of nanofluidic devices. Fluorescence measurements confirm that 50-nm-high nanochannels show an exclusion of co-ions and an enrichment of counterions at low ionic strengths. This permselectivity is related to the increasing thickness of the electrical double layer (EDL) with decreasing salt concentrations, which results in an EDL overlap in an aperture if the height of the nanochannel and the thickness of the EDL are comparable in size. The diffusive transport of charged species and therefore the exclusion-enrichment effect was described with a simple model based on the Poisson-Boltzmann equation. The negatively charged Pyrex surface of the nanometer characteristic apertures can be inversed with chemical surface pretreatments, resulting in an exclusion of cations and an enrichment of anions. When a pressure gradient is applied across the nanochannels, charged molecules are electrostatically rejected at the entrance of the nanometer-sized apertures, which can be used for separation processes. Proteomic applications are presented such as the separation and preconcentration of proteins. The diffusion of Lectin proteins with different isoelectric points and very similar compositions were controlled by regulating the pH value of the buffer. When the proteins are neutral at their pI value, the diffusion coefficient is maximal because the biomolecules does not interact electrostatically with the charged surfaces of the nanochannel. This led to a fast separation of three Lectin proteins across the nanochannel. The pI values measured in this experiment are slightly shifted compared to the values obtained with isoelectric focusing because of reversible adsorption of proteins on the walls which affects the pH value in the nanochannel. An important application in the proteomic field is the preconcentration of biomolecules. By applying an electric field across the nanochannel, anionic and cationic analytes were preconcentrated on the cathodic side of the nanometer-sized aperture whereas on the anodic side depletion of ions was observed. This is due to concentration polarization, a complex of effects related to the formation of ionic concentration gradients in the electrolyte solution adjacent to an ion-selective interface. It was measured that the preconcentration factor increased with the net charge of the molecule, leading to a preconcentration factor of > 600 for rGFP proteins in 9 minutes. Such preconcentrations are important in micro total analysis systems to achieve increased detection signals of analytes contained in dilute solutions. Compared to cylindrical pores, our fabrication process allows the realization of nanochannels on a chip in which the exclusion-enrichment effect and a big flux across the nanometer-sized aperture can be achieved, showing the interest for possible micro total analysis system applications. The described exclusion-enrichment effect as well as concentration polarization play an important role in transport phenomena in nanofluidics. The appendix includes preliminary investigations in DNA molecule separation and fluorescence correlation spectroscopy measurements, which allows investigating the behavior of molecules in the nanochannel itself.

/pdf/transport-phenomena-in-nanofluidics-1di3nwdyom.pdf

Transport phenomena in nanofluidics

Droplet microfluidics generates and manipulates discrete droplets through immiscible multiphase flows inside microchannels Due to its remarkable advantages, droplet microfluidics bears significant value in an extremely wide range of area In this review, we provide a comprehensive and in-depth insight into droplet microfluidics, covering fundamental research from microfluidic chip fabrication and droplet generation to the applications of droplets in bio(chemical) analysis and materials generation The purpose of this review is to convey the fundamentals of droplet microfluidics, a critical analysis on its current status and challenges, and opinions on its future development We believe this review will promote communications among biology, chemistry, physics, and materials science

Emerging Droplet Microfluidics

Microfluidics is an emerging field that has given rise to a large number of scientific and technological developments over the last few years. This review reports on the use of various materials, such as silicon, glass and polymers, and their related technologies for the manufacturing of simple microchannels and complex systems. It also presents the main application fields concerned with the different technologies and the most significant results reported by academic and industrial teams. Finally, it demonstrates the advantage of developing approaches for associating polymer technologies for manufacturing of fluidic elements with integration of active or sensitive elements, particularly silicon devices.

https://iopscience.iop.org/article/10.1088/0960-1317/17/5/R01/pdf

Lab-on-chip technologies: making a microfluidic network and coupling it into a complete microsystem : a review

The magnitude and direction of the electro-osmotic flow (EOF) inside a microfabricated fluid channel can be controlled by a perpendicular electric field of 1.5 megavolts per centimeter generated by a voltage of only 50 volts. A microdevice called a "flowFET," with functionality comparable to that of a field-effect transistor (FET) in microelectronics, has been realized. Two flowFETs integrated with a channel junction have been used to generate opposite flows inside a single EOF-pumped channel, thus illustrating the potential of the flowFET as a controlling and switching element in microfluidic networks.

Field-Effect Flow Control for Microfabricated Fluidic Networks

This review gives an overview of developments in the field of microchip analysis for clinical diagnostic and forensic applications. The approach chosen to review the literature is different from that in most microchip reviews to date, in that the information is presented in terms of analytes tested rather than microchip method. Analyte categories for which examples are presented include (i) drugs (quality control, seizures) and explosives residues, (ii) drugs and endogenous small molecules and ions in biofluids, (iii) proteins and peptides, and (iv) analysis of nucleic acids and oligonucleotides. Few cases of microchip analysis of physiological samples or other "real-world" matrices were found. However, many of the examples presented have potential application for these samples, especially with ongoing parallel developments involving integration of sample pretreatment onto chips and the use of fluid propulsion mechanisms other than electrokinetic pumping.

https://onlinelibrary.wiley.com/doi/pdf/10.1002/1522-2683%28200203%2923%3A5%3C677%3A%3AAID-ELPS677%3E3.0.CO%3B2-8

Microfluidic chips for clinical and forensic analysis

This paper shows that in situ micromachining can be used to simultaneously position and define (i) support particles, (ii) convective transport channels, (iii) an inlet distribution network of channels, and (iv) outlet channels in multiple chromatography columns on a single quartz wafer to the level of a few tenths of a micrometer. Stationary phases were bonded to 5 × 5 × 10 μm collocated monolith support structures separated by rectangular channels 1.5 μm wide and 10 μm deep with a low degree of deviation of channel width between the top and bottom of channels. High aspect ratio microfabrication can only be achieved with deep reactive ion etching. The volume of a 150 μm × 4.5 cm column was 18 nL. Column efficiency was evaluated in the capillary electrochromatography (CEC) mode using rhodamine 123 and a hydrocarbon stationary phase. Plate heights in these columns were typically 0.6 μm in the nonretained and 1.3 μm in the retained modes of operation. Columns were designed to have identical mobile-phase vel...

Niall Tait

Papers

Fabrication of Nanocolumns for Liquid Chromatography