National Institute of Standards and Technology における超伝導研究及び生活

The increasing use of wireless networks and the constant miniaturization of electrical devices has empowered the development of Wireless Body Area Networks (WBANs). In these networks various sensors are attached on clothing or on the body or even implanted under the skin. The wireless nature of the network and the wide variety of sensors offer numerous new, practical and innovative applications to improve health care and the Quality of Life. The sensors of a WBAN measure for example the heartbeat, the body temperature or record a prolonged electrocardiogram. Using a WBAN, the patient experiences a greater physical mobility and is no longer compelled to stay in the hospital. This paper offers a survey of the concept of Wireless Body Area Networks. First, we focus on some applications with special interest in patient monitoring. Then the communication in a WBAN and its positioning between the different technologies is discussed. An overview of the current research on the physical layer, existing MAC and network protocols is given. Further, cross layer and quality of service is discussed. As WBANs are placed on the human body and often transport private data, security is also considered. An overview of current and past projects is given. Finally, the open research issues and challenges are pointed out.

/pdf/a-survey-on-wireless-body-area-networks-f3nx5ii4yv.pdf

A survey on wireless body area networks

A communication infrastructure is an essential part to the success of the emerging smart grid. A scalable and pervasive communication infrastructure is crucial in both construction and operation of a smart grid. In this paper, we present the background and motivation of communication infrastructures in smart grid systems. We also summarize major requirements that smart grid communications must meet. From the experience of several industrial trials on smart grid with communication infrastructures, we expect that the traditional carbon fuel based power plants can cooperate with emerging distributed renewable energy such as wind, solar, etc, to reduce the carbon fuel consumption and consequent green house gas such as carbon dioxide emission. The consumers can minimize their expense on energy by adjusting their intelligent home appliance operations to avoid the peak hours and utilize the renewable energy instead. We further explore the challenges for a communication infrastructure as the part of a complex smart grid system. Since a smart grid system might have over millions of consumers and devices, the demand of its reliability and security is extremely critical. Through a communication infrastructure, a smart grid can improve power reliability and quality to eliminate electricity blackout. Security is a challenging issue since the on-going smart grid systems facing increasing vulnerabilities as more and more automation, remote monitoring/controlling and supervision entities are interconnected.

https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1315&context=electricalengineeringfacpub

A Survey on Smart Grid CommunicationInfrastructures: Motivations, Requirements andChallenges

Recent advances in microelectronics and integrated circuits, system-on-chip design, wireless communication and intelligent low-power sensors have allowed the realization of a Wireless Body Area Network (WBAN). A WBAN is a collection of low-power, miniaturized, invasive/non-invasive lightweight wireless sensor nodes that monitor the human body functions and the surrounding environment. In addition, it supports a number of innovative and interesting applications such as ubiquitous healthcare, entertainment, interactive gaming, and military applications. In this paper, the fundamental mechanisms of WBAN including architecture and topology, wireless implant communication, low-power Medium Access Control (MAC) and routing protocols are reviewed. A comprehensive study of the proposed technologies for WBAN at Physical (PHY), MAC, and Network layers is presented and many useful solutions are discussed for each layer. Finally, numerous WBAN applications are highlighted.

/pdf/a-comprehensive-survey-of-wireless-body-area-networks-4zgwb61yeq.pdf

A Comprehensive Survey of Wireless Body Area Networks

Buildings are among the largest consumers of electricity in the US. A significant portion of this energy use in buildings can be attributed to HVAC systems used to maintain comfort for occupants. In most cases these building HVAC systems run on fixed schedules and do not employ any fine grained control based on detailed occupancy information. In this paper we present the design and implementation of a presence sensor platform that can be used for accurate occupancy detection at the level of individual offices. Our presence sensor is low-cost, wireless, and incrementally deployable within existing buildings. Using a pilot deployment of our system across ten offices over a two week period we identify significant opportunities for energy savings due to periods of vacancy. Our energy measurements show that our presence node has an estimated battery lifetime of over five years, while detecting occupancy accurately. Furthermore, using a building simulation framework and the occupancy information from our testbed, we show potential energy savings from 10% to 15% using our system.

[ACM Press the 2nd ACM Workshop - Zurich, Switzerland (2010.11.02-2010.11.02)] Proceedings of the 2nd ACM Workshop on Embedded Sensing Systems for Energy-Efficiency in Building - BuildSys \'10 - Occupancy-driven energy management for smart building automation

We analyze IPv6 handover over wireless LAN. Mobile IPv6 is designed to manage mobile nodes' movements between wireless IPv6 networks. Nevertheless, the active communications of a mobile node are interrupted until the handover completes. Therefore, several extensions to Mobile IPv6 have been proposed to reduce the handover latency and the number of lost packets. We describe two of them, hierarchical Mobile IPv6, which manages local movements into a domain, and fast handover protocol, which allows the use of layer 2 triggers to anticipate the handover. We expose the specific handover algorithms proposed by all these methods. We also evaluate the handover latency over IEEE 802.11b wireless LAN. We compare the layer 2 and layer 3 handover latency in the Mobile IPv6 case in order to show the saving of time expected by using anticipation. We conclude by showing how to adapt the IEEE 802.11b control frames to set up such anticipation.

Handover management for mobile nodes in IPv6 networks

The objectives of this article are to survey the benefits and challenges posed by the deployment and operation of wireless communications in support of healthcare networks. While the main advantage of wireless communications remains to provide ubiquitous connectivity, thus allowing greater physical mobility and interoperability, a number of engineering issues need to be addressed before this vision is realized. Our intent in this article is to explore some of these issues, including deployment, interference, and mobility, and provide insights for potential solutions.

Prevailing over wires in healthcare environments: benefits and challenges

/pdf/prevailing-over-wires-in-healthcare-environments-benefits-17cine8auc.pdf

Prevailing Over Wires in Healthcare Environments: Benefits and Challenges | NIST

This document introduces extensions to Mobile IPv6 [1] and Nemo Basic
Support [2] that allow nodes to bind one or more flows to a care-of
address. These extensions allow multihomed nodes to take full
advantage of the different properties associated with each of their
interfaces.

Flow Bindings in Mobile IPv6 and Nemo Basic Support

This document introduces extensions to Mobile IPv6 that allow nodes to
bind one or more flows to a care-of address. These extensions allow
multihomed nodes to instruct their peers to direct downlink flows to
specific addresses.

/pdf/flow-bindings-in-mobile-ipv6-and-network-mobility-nemo-basic-5arq8lp8pm.pdf

Nicolas Montavont

Papers

Handover management for mobile nodes in IPv6 networks

Prevailing over wires in healthcare environments: benefits and challenges

Prevailing Over Wires in Healthcare Environments: Benefits and Challenges | NIST

Flow Bindings in Mobile IPv6 and Nemo Basic Support

Flow Bindings in Mobile IPv6 and Network Mobility (NEMO) Basic Support