https://www.jpcomplex.ir/Content/media/image/2013/08/772_orig.pdf

Electrochemical technologies in wastewater treatment

Diamond may be grown at low pressures where it is the metastable form of carbon. Recent advances in a wide variety of plasma and electrical discharge methods have led to dramatic increases in growth rates. All of these methods have certain aspects in common, namely, the presence of atomic hydrogen and the production of energetic carbon-containing fragments under conditions that support high mobilities on the diamond surface. Some understanding of the processes taking place during nucleation and growth of diamond has been achieved, but detailed molecular mechanisms are not yet known. Related research has led to the discovery of a new class of materials, the "diamondlike" phases. Vapor-grown diamond and diamondlike materials may have eventual applications in abrasives, tool coatings, bearing surfaces, electronics, optics, tribological surfaces, and corrosion protection.

https://science.sciencemag.org/content/sci/241/4868/913.full.pdf

Low-Pressure, Metastable Growth of Diamond and "Diamondlike" Phases

Diamond synthesis from gas phase in microwave plasma

Current issues and problems in the chemical vapor deposition (CVD) of diamond are those which relate to its characterization, its nucleation on foreign surfaces, the question of its formation in preference to the other phases of solid carbon (for example, graphite, chaoite, or lonsdaleite), why different morphologies and crystallographic orientations (textures) are seen in different experiments or with different parameters in the same experiment, and finally whether well-crystallized metastable phases can be obtained by CVD in other material systems or are only a peculiarity of carbon chemistry. Whether a given carbon coating is justly described as diamond has been such an issue, and coatings should clearly show evidence for diamond by x-ray diffraction and Raman spectroscopy before the claim of diamond is made. Experimental results have not been consistent in many cases, and much work remains to be done before an accurate assessment can be made of the technological impact of the development.

https://science.sciencemag.org/content/sci/247/4943/688.full.pdf

Current Issues and Problems in the Chemical Vapor Deposition of Diamond

Microcrystals of diamond were grown on non-diamond substrates including silicon, molybdenum and silica, as well as on diamond by chemical vapour deposition. Deposition was carried out by passing a mixture of hydrocarbon and hydrogen gases through a heated reaction chamber in which a hot tungsten filament was held near the substrates. The deposit was identified by reflection electron diffraction and Raman spectroscopy. The effects of experimental conditions on the growth features were studied.

Growth of diamond particles from methane-hydrogen gas

Microcrystalline diamond has been formed on silicon or molybdenum substrates by vapor deposition from a geseous mixture of methane and hydrogen. Cubo-octahedral or multiply-twinned crystals were obtained. The structure of the deposits was identified by electron diffraction and Raman scattering.

https://iopscience.iop.org/article/10.1143/JJAP.21.L183/pdf

Vapor Deposition of Diamond Particles from Methane

A method for synthesizing diamond wherein hydrogen gas which has passed through a micro-wave non-electrode discharge and mixed with hydrocarbon gas, or a mixture gas consisting of hydrocarbon and hydrogen after its passing through a micro-wave non-electrode discharge, is introduced onto the surface of a substrate heated to a temperature of from 300° to 1300° C. to decompose hydrocarbon in its energetically activated state for the diamond deposition.

Method for synthesizing diamond

A powder mixture of diamond—8.9 vol % Co was consolidatedin situ on a WC-10 wt % Co base at temperatures of 1300 to 1500° C under a pressure of 5.8 GPa. The sintered body obtained at 1300° C, which is below the diamond—cobalt eutectic point, was not hard, and the surface of the diamond particle was partially graphitized. On the other hand, the sintered body obtained at 1400 to 1500° C was fairly hard. A strong correlation was also observed between hardness and the cobalt content found in the sintered body. The cobalt content in the harder sintered body was clearly lower compared with that of the softer one. The surface graphitization of the diamond particles is necessary to the transfer of cobalt during the sintering of diamond. In sintering the diamond-cobalt system, the sinterability of diamond was closely related to the feasibility of transformation from diamond to graphite.

Nobuo Setaka

Papers

Diamond synthesis from gas phase in microwave plasma

Vapor Deposition of Diamond Particles from Methane

Growth of diamond particles from methane-hydrogen gas

Method for synthesizing diamond

Sintering behaviour of the diamond-cobalt system at high temperature and pressure