다중혈관 관상동맥 환자에서 y-문합을 이용하여 양쪽 내흉동맥만을 사용한 우회술의 조기 성적

Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications

1. Introduction and overview 2. Film stress and substrate curvature 3. Stress in anisotropic and patterned films 4. Delamination and fracture 5. Film buckling, bulging and peeling 6. Dislocation formation in epitaxial systems 7. Dislocation interactions and strain relaxation 8. Equilibrium and stability of surfaces 9. The role of stress in mass transport.

Thin Film Materials: Stress, Defect Formation and Surface Evolution

http://web.mit.edu/durint/PDF/Dao_et_alFR.pdf

Computational modeling of the forward and reverse problems in instrumented sharp indentation

A class of phenomenological strain gradient plasticity theories is formulated to accommodate more than one material length parameter. The objective is a generalization of the classical J2 3ow theory of plasticity to account for strain gradient e4ects that emerge in deformation phenomena at the micron scale. A special case involves a single length parameter and is of similar form to that proposed by Aifantis and co-workers. Distinct computational advantages are associated with this class of theories that make them attractive for applications requiring the generation of numerical solutions. The higher-order nature of the theories is emphasized, involving both higher-order stresses and additional boundary conditions. Competing members in the class of theories will be examined in light of experimental data on wire torsion, sheet bending, indentation and other micron scale plasticity phenomena. The data strongly suggest that at least two distinct material length parameters must be introduced in any phenomenological gradient plasticity theory, one parameter characterizing problems for which stretch gradients are dominant and the other relevant to problems when rotation gradients (or shearing gradients) are controlling. Flow and deformation theory versions of the theory are highlighted that can accommodate multiple length parameters. Examination of several basic problems reveals that the new formulations predict quantitatively similar plastic behavior to the theory proposed earlier by the present authors. The new formulations improve on the earlier theory in the manner in which elastic and plastic strains are decomposed and in the representation of behavior in the elastic range. ? 2001 Elsevier Science Ltd. All rights reserved.

http://www-mech.eng.cam.ac.uk/profiles/fleck/papers/143.pdf

A reformulation of strain gradient plasticity

Failure in steel weldments operating at high temperatures often occurs in the heat-affected zone adjacent to the weld. Such failures can be a result of material inhomogeneity within the heat-affected zone and in the case of tempered martensite steels have been linked with regions of untransformed α (ferrite) phase or over-tempered martensite within the intercritical region of the heat-affected zone. In this work, two-dimensional Voronoi tessellation is used to construct polygonal Voronoi cells to represent the microstructure of the heat-affected zone of a weld in a tempered martensite steel. The Voronoi construction is treated as a representative volume element of the material and is discretised by 8-node linear brick elements, with periodic boundary conditions. The lattice orientation at each material point is specified by three Euler angles, which are assumed to be randomly distributed, to represent the initial lack of texture in the intercritical region of the heat-affected zone. The constitutive respo...

Influence of material inhomogeneity on the mechanical response of a tempered martensite steel

Qualification of Reeled Mechanically Lined Pipes for Fatigue Service

A comparison between fine and conventional blanking is carried out in this paper. In the fine blanking process, V-ring indentation is applied to create hydrostatic pressure and prevent premature fracture in an undesired direction. Furthermore, a small clearance between the punch and die is employed along with a counterforce punch that causes concentrated strain in the sheared band region. A fracture mechanics oriented finite element procedure has been employed in this research work in order to obtain the fracture path. The fracture path is found according to the stress and strain histories which are calculated in each element. The numerical results have shown that the sheared edge quality in the blanking process is strongly influenced by the fracture path. In fine blanking, there are various parameters affecting the sheared edge quality and dimensional accuracy. The finite element calculation is carried out for an axisymmetric model. The commercial finite element code ABAQUS V6.2 is employed along with a controlling program that is written in Visual BASIC.

Comparison of Fine and Conventional Blanking Based on Ductile Fracture Criteria

Residual stress distributions in ferritic steel weldments have been obtained using the neutron diffraction method. It is shown that the transverse residual stress distribution for different plate sizes and yield strength are of similar shape and magnitude when normalised appropriately and peak stresses are on the order of the material yield strength. The resultant linear elastic stress intensity factors for these stress distributions have been obtained using the finite element method. It has been shown that the use of the recommended residual stress distributions in UK structural integrity procedures leads to a conservative assessment. The stress intensity factors for the welded T-plate have been shown to be very similar to those obtained using a smooth edge cracked plate subjected to the same local stress field

Stress Intensity Factors Due to Residual Stresses in T-Plate Welds

In this work, a micromechanical finite element model is presented to investigate micro-plasticity evolution in crystalline materials, with a comprehensive consideration of microstructural interactions, including morphology-based intragranular stress-strain response and the strain gradient induced scale effect. A dislocation-mechanics based crystal plasticity formulation has been employed to account for slip based inelastic deformation. A polycrystalline model has been constructed using the Voronoi tessellation technique to represent the microstructure of a martensitic power plant steel, P91. The model has been validated through a uniaxial tensile test. The effects of strain gradient have been examined at both macroscopic and microscopic levels and the importance of accounting for strain gradient effects in the prediction of local deformation states is discussed for P91.Copyright © 2013 by ASME

Noel P. O’Dowd

Papers

Influence of material inhomogeneity on the mechanical response of a tempered martensite steel

Qualification of Reeled Mechanically Lined Pipes for Fatigue Service

Comparison of Fine and Conventional Blanking Based on Ductile Fracture Criteria

Stress Intensity Factors Due to Residual Stresses in T-Plate Welds

Modelling of Micro-Plasticity Evolution in Crystalline Materials