Wetting phenomena are ubiquitous in nature and technology. A solid substrate exposed to the environment is almost invariably covered by a layer of fluid material. In this review, the surface forces that lead to wetting are considered, and the equilibrium surface coverage of a substrate in contact with a drop of liquid. Depending on the nature of the surface forces involved, different scenarios for wetting phase transitions are possible; recent progress allows us to relate the critical exponents directly to the nature of the surface forces which lead to the different wetting scenarios. Thermal fluctuation effects, which can be greatly enhanced for wetting of geometrically or chemically structured substrates, and are much stronger in colloidal suspensions, modify the adsorption singularities. Macroscopic descriptions and microscopic theories have been developed to understand and predict wetting behavior relevant to microfluidics and nanofluidics applications. Then the dynamics of wetting is examined. A drop, placed on a substrate which it wets, spreads out to form a film. Conversely, a nonwetted substrate previously covered by a film dewets upon an appropriate change of system parameters. The hydrodynamics of both wetting and dewetting is influenced by the presence of the three-phase contact line separating "wet" regions from those that are either dry or covered by a microscopic film only. Recent theoretical, experimental, and numerical progress in the description of moving contact line dynamics are reviewed, and its relation to the thermodynamics of wetting is explored. In addition, recent progress on rough surfaces is surveyed. The anchoring of contact lines and contact angle hysteresis are explored resulting from surface inhomogeneities. Further, new ways to mold wetting characteristics according to technological constraints are discussed, for example, the use of patterned surfaces, surfactants, or complex fluids.

/pdf/wetting-and-spreading-56ditqbfmj.pdf

Wetting and Spreading

We study the stability of steady sliding between elastically deformable continua using rate and state dependent friction laws That is done for both elastically identical and elastically dissimilar solids The focus is on linearized response to perturbations of steady-state sliding, and on studying how the positive direct effect (instantaneous increase or decrease of shear strength in response to a respective instantaneous increase or decrease of slip rate) of those laws allows the existence of a quasi-static range of response to perturbations at sufficiently low slip rate We discuss the physical basis of rate and state laws, including the likely basis for the direct effect in thermally activated processes allowing creep slippage at asperity contacts, and estimate activation parameters for quartzite and granite Also, a class of rate and state laws suitable for variable normal stress is presented As part of the work, we show that compromises from the rate and state framework for describing velocity-weakening friction lead to paradoxical results, like supersonic propagation of slip perturbations, or to ill-posedness, when applied to sliding between elastically deformable solids The case of sliding between elastically dissimilar solids has the inherently destabilizing feature that spatially inhomogeneous slip leads to an alteration of normal stress, hence of frictional resistance We show that the rate and state friction laws nevertheless lead to stability of response to sufficiently short wavelength perturbations, at very slow slip rates Further, for slow sliding between dissimilar solids, we show that there is a critical amplitude of velocity-strengthening above which there is stability to perturbations of all wavelengths

http://esag.harvard.edu/rice/197_Rice_Lap_Ranj_JMPS_01.pdf

Rate and state dependent friction and the stability of sliding between elastically deformable solids

We evaluate the effect of coseismic stress changes on the fault slip at midcrustal depth, assuming a velocity-strengthening brittle creep rheology. We show that this model can help reconcile the time evolution of afterslip, as measured from geodesy, with aftershocks decay. We propose an analytical expression for slip of the brittle creeping fault zone (BCFZ) that applies to any dynamic or static stress perturbation, including shear stress and normal stress changes. The model predicts an initial logarithmic increase of slip with time. Postseismic slip rate decays over a characteristic time t_r = aσ/τ that does not depend on the amplitude of the stress perturbation, and it asymptotically joins the long-term creep imposed by interseismic stress buildup τ. Given that the seismicity rate might be considered proportional to the sliding velocity of the BCFZ, the model predicts a decay rate of aftershocks that follows Omori's law, with a mathematical formalism identical to that of Dieterich [1994] although based on a different mechanical rationale. Our model also differs from Dieterich's model in that it requires that aftershock sequences and deep afterslip, as constrained from geodetic measurements, should follow the same temporal evolution. We test this for the 1999 Chi-Chi earthquake, M_w = 7.6 and find that both sets of data are consistent with a model of afterslip due to the response of the BCFZ. The inferred relaxation time t_r = 8.5 years requires a value for a = ∂μ/∂log(V) (μ being the coefficient of friction) in the range between 1.3 10^(−3) and 10^(−2).

/pdf/postseismic-relaxation-driven-by-brittle-creep-a-possible-15qo2flo4s.pdf

Postseismic relaxation driven by brittle creep: A possible mechanism to reconcile geodetic measurements and the decay rate of aftershocks, application to the Chi-Chi earthquake, Taiwan

The dynamics of friction have been studied for hundreds of years, yet many aspects of these everyday processes are not understood. One such aspect is the onset of frictional motion (slip). First described more than 200 years ago as the transition from static to dynamic friction, the onset of slip is central to fields as diverse as physics1,2,3, tribology4,5, mechanics of earthquakes6,7,8,9,10,11 and fracture12,13,14. Here we show that the onset of frictional slip is governed by three different types of coherent crack-like fronts: these are observed by real-time visualization of the net contact area that forms the interface separating two blocks of like material. Two of these fronts, which propagate at subsonic and intersonic velocities, have been the subject of intensive recent interest12,13,14,15,16,17. We show that a third type of front, which propagates an order of magnitude more slowly, is the dominant mechanism for the rupture of the interface. No overall motion (sliding) of the blocks occurs until either of the slower two fronts traverses the entire interface.

Detachment fronts and the onset of dynamic friction

We review the present state of understanding of solid friction at low velocities and for systems with negligibly small wear effects. We first analyze in detail the behavior of friction at interfaces between macroscopic hard rough solids, whose main dynamical features are well described by the Rice–Ruina rate and state-dependent constitutive law. We show that it results from two combined effects: (i) the threshold rheology of nanometer-thick junctions jammed under confinement into a soft glassy structure and (ii) the geometric aging, i.e. slow growth of the real area of contact via asperity creep interrupted by sliding. Closer analysis leads to identifying a second aging-rejuvenation process, at work within the junctions themselves. We compare the effects of structural aging at such multicontact, very highly confined, interfaces with those met under different confinement levels, namely boundary lubricated contacts and extended adhesive interfaces involving soft materials (hydrogels, elastomers). This leads...

Solid friction from stick–slip down to pinning and aging

We report an extensive study of dynamic friction at nonlubricated multicontact interfaces between nominally flat bodies, rough on the micrometer scale, made of identical polymer glasses. This work, which complements a previous study of static friction on the same systems, has been performed at temperatures ranging from $20\ifmmode^\circ\else\textdegree\fi{}\mathrm{C}$ to close below the glass transitions. The data are analyzed within the framework of the Rice-Ruina state- and rate-dependent friction model. We show that this phenomenology is equivalent to a generalized Tabor decomposition of the friction force into the product of an age-dependent load-bearing area and of a velocity-strengthening interfacial shear stress. Quantitative analysis of this latter term leads to associate velocity strengthening with thermal activation of basic dynamical units of nanometer dimensions. We interpret our results with the help of a model due to Persson, in which shear is localized in a nanometer-thick interfacial adhesive layer, pinned elastically at a low shear level. Sliding proceeds via uncorrelated depinning of ``nanoblocks'' which constitute the layer. It is the competition between the drive-induced loading of these blocks up to their depinning stress and the thermally activated premature depinning events which leads to the velocity-strengthening contribution to the interfacial strength. In our interpretation, friction therefore appears as the localized elastoplastic response of a confined amorphous interfacial layer.

Physical analysis of the state- and rate-dependent friction law. II. Dynamic friction

This paper discusses the time-dependent mechanical response of poly(methyl methacrylate) (PMMA) and polystyrene (PS) subjected to a shallow indentation made by a 750 µm radius steel ball at 25 °C. The penetration depth was measured as a time-response to a prescribed loading history of the indenter. The tests were performed in the intermediate elastic-plastic regime, which is of paramount importance when dealing with the mechanics of a multicontact interface between rough bodies. The creep characteristics under constant load were analysed with an Eyring law relating the average stress and the strain rate in the deformed volume. The results were compared to data obtained by a standard uniaxial compression test on the bulk material. We have deduced a simple empirical rule which accounts for the heterogeneous stress and strain fields under the indenter and reduces the intricate problem of elastic-plastic indentation creep to an effective scalar rule.

https://iopscience.iop.org/article/10.1088/0022-3727/32/22/315/pdf

Elastic-plastic indentation creep of glassy poly(methyl methacrylate) and polystyrene: characterization using uniaxial compression and indentation tests

P. Berthoud

Papers

Physical analysis of the state- and rate-dependent friction law. II. Dynamic friction

Elastic-plastic indentation creep of glassy poly(methyl methacrylate) and polystyrene: characterization using uniaxial compression and indentation tests