Characterizing flow and transport in fractured geological media: A review

Among the current problems that hydrogeologists face, perhaps there is none as challenging as the characterization of fractured rock (Faybishenko and Benson 2000). This paper discusses issues associated with the quantification of flow and transport through fractured rocks on scales not exceeding those typically associated with single- and multi-well pressure (or flow) and tracer tests. As much of the corresponding literature has focused on fractured crystalline rocks and hard sedimentary rocks such as sandstones, limestones (karst is excluded) and chalk, so by default does this paper. Direct quantification of flow and transport in such rocks is commonly done on the basis of fracture geometric data coupled with pressure (or flow) and tracer tests, which therefore form the main focus. Geological, geophysical and geochemical (including isotope) data are critical for the qualitative conceptualization of flow and transport in fractured rocks, and are being gradually incorporated in quantitative flow and transport models, in ways that this paper unfortunately cannot describe but in passing. The hydrogeology of fractured aquifers and other earth science aspects of fractured rock hydrology merit separate treatments. All evidence suggests that rarely can one model flow and transport in a fractured rock consistently by treating it as a uniform or mildly nonuniform isotropic continuum. Instead, one must generally account for the highly erratic heterogeneity, directional dependence, dual or multicomponent nature and multiscale behavior of fractured rocks. One way is to depict the rock as a network of discrete fractures (with permeable or impermeable matrix blocks) and another as a nonuniform (single, dual or multiple) continuum. A third way is to combine these into a hybrid model of a nonuniform continuum containing a relatively small number of discrete dominant features. In either case the description can be deterministic or stochastic. The paper contains a brief assessment of these trends in light of recent experimental and theoretical findings, ending with a short list of prospects and challenges for the future.

Trends, prospects and challenges in quantifying flow and transport through fractured rocks

A large-scale investigation of fracture flow was recently conducted in a granite uranium mine at Fanay-Augeres, France. Its aim was to develop a methodology for the investigation of possible nuclear waste repository sites in crystalline environments, and thus to determine what measurements to make and what models to use in order to predict the flow and transport properties of the medium, i.e., their average behaviors and spatial variabilities at different scales. Four types of data were collected: (1) geometry of the fracture network; (2) local hydraulic properties measured by injection tests in boreholes; (3) global hydraulic behavior from flow rate and piezometric head distribution at a 106 m3 scale; and (4) tracer tests performed at a scale of up to 40 m. A stochastic fracture network model assuming negligible matrix permeability was developed and calibrated essentially on data 1 and 2 above; this was then used to predict data 3 and 4 in an attempt to validate both the parameters and the structure of the model. In this first part, only the flow problem (data 1) is discussed.

Modeling fracture flow with a stochastic discrete fracture network: calibration and validation: 1. The flow model

Heterogeneity can be dealt with by defining homogeneous equivalent properties, known as averaging, or by trying to describe the spatial variability of the rock properties from geologic observations and local measurements. The techniques available for these descriptions are mostly continuous Geostatistical models, or discontinuous facies models such as the Boolean, Indicator or Gaussian-Threshold models and the Markov chain model. These facies models are better suited to treating issues of rock strata connectivity, e.g. buried high permeability channels or low permeability barriers, which greatly affect flow and, above all, transport in aquifers. Genetic models provide new ways to incorporate more geology into the facies description, an approach that has been well developed in the oil industry, but not enough in hydrogeology. The conclusion is that future work should be focused on improving the facies models, comparing them, and designing new in situ testing procedures (including geophysics) that would help identify the facies geometry and properties. A world-wide catalog of aquifer facies geometry and properties, which could combine site genesis and description with methods used to assess the system, would be of great value for practical applications.

/pdf/dealing-with-spatial-heterogeneity-4d67dw7xwy.pdf

Dealing with spatial heterogeneity

http://uu.diva-portal.org/smash/get/diva2:1153724/FULLTEXT01

The use of discrete fracture networks for modelling coupled geomechanical and hydrological behaviour of fractured rocks

As part of the development of a methodology for investigating flow and transport in fractured rocks, a large-scale experiment was recently performed at Fanay-Augeres, France. In a companion paper (Cacas et al., this issue) (paper 1) the results of the flow measurements were analyzed. In this paper, the results of the tracer experiments are interpreted. A particle following is coupled to the flow model, described in paper 1. Microscopic dispersion in the fractures and retardation effects due to unevenness of the flow paths are taken into account. The transport model is calibrated on in situ tracer tests, whereas the parameters of the hydraulic model were initially fitted on structural and hydraulic measurements (paper 1). The dispersive properties of the model are reasonably comparable to those of the real site. It tends to confirm the validity of the preliminary hydraulic calibration of the model and thus to validate further the approach used to simulate hydraulic and transport phenomena.

P. Calmels

Papers

Modeling fracture flow with a stochastic discrete fracture network: Calibration and validation: 2. The transport model

Évaluation précoce de la microarchitecture osseuse et analyse en éléments finis par HRpQCT après un accident vasculaire cérébral avec hémiplégie