One of the greatest challenges faced by designers of digital systems is optimizing the communication and interconnection between system components. Interconnection networks offer an attractive and economical solution to this communication crisis and are fast becoming pervasive in digital systems. Current trends suggest that this communication bottleneck will be even more problematic when designing future generations of machines. Consequently, the anatomy of an interconnection network router and science of interconnection network design will only grow in importance in the coming years.

This book offers a detailed and comprehensive presentation of the basic principles of interconnection network design, clearly illustrating them with numerous examples, chapter exercises, and case studies. It incorporates hardware-level descriptions of concepts, allowing a designer to see all the steps of the process from abstract design to concrete implementation.

·Case studies throughout the book draw on extensive author experience in designing interconnection networks over a period of more than twenty years, providing real world examples of what works, and what doesn't.

·Tightly couples concepts with implementation costs to facilitate a deeper understanding of the tradeoffs in the design of a practical network.

·A set of examples and exercises in every chapter help the reader to fully understand all the implications of every design decision.

Table of Contents


Chapter 1 Introduction to Interconnection Networks 
1.1 Three Questions About Interconnection Networks 
1.2 Uses of Interconnection Networks 
1.3 Network Basics 
1.4 History 
1.5 Organization of this Book 

Chapter 2 A Simple Interconnection Network 
2.1 Network Specifications and Constraints 
2.2 Topology 
2.3 Routing 
2.4 Flow Control 
2.5 Router Design 
2.6 Performance Analysis 
2.7 Exercises 

Chapter 3 Topology Basics 
3.1 Nomenclature 
3.2 Traffic Patterns 
3.3 Performance 
3.4 Packaging Cost 
3.5 Case Study: The SGI Origin 2000 
3.6 Bibliographic Notes 
3.7 Exercises 

Chapter 4 Butterfly Networks 
4.1 The Structure of Butterfly Networks 
4.2 Isomorphic Butterflies 
4.3 Performance and Packaging Cost 
4.4 Path Diversity and Extra Stages 
4.5 Case Study: The BBN Butterfly 
4.6 Bibliographic Notes 
4.7 Exercises 

Chapter 5 Torus Networks 
5.1 The Structure of Torus Networks 
5.2 Performance 
5.3 Building Mesh and Torus Networks 
5.4 Express Cubes 
5.5 Case Study: The MIT J-Machine 
5.6 Bibliographic Notes 
5.7 Exercises 
Chapter 6 Non-Blocking Networks 
6.1 Non-Blocking vs. Non-Interfering Networks 
6.2 Crossbar Networks 
6.3 Clos Networks 
6.4 Benes Networks 
6.5 Sorting Networks 
6.6 Case Study: The Velio VC2002 (Zeus) Grooming Switch 
6.7 Bibliographic Notes 
6.8 Exercises 

Chapter 7 Slicing and Dicing 
7.1 Concentrators and Distributors 
7.2 Slicing and Dicing 
7.3 Slicing Multistage Networks 
7.4 Case Study: Bit Slicing in the Tiny Tera 
7.5 Bibliographic Notes 
7.6 Exercises 

Chapter 8 Routing Basics 
8.1 A Routing Example 
8.2 Taxonomy of Routing Algorithms 
8.3 The Routing Relation 
8.4 Deterministic Routing 
8.5 Case Study: Dimension-Order Routing in the Cray T3D 
8.6 Bibliographic Notes 
8.7 Exercises 

Chapter 9 Oblivious Routing 
9.1 Valiant's Randomized Routing Algorithm 
9.2 Minimal Oblivious Routing 
9.3 Load-Balanced Oblivious Routing 
9.4 Analysis of Oblivious Routing 
9.5 Case Study: Oblivious Routing in the
Avici Terabit Switch Router(TSR) 
9.6 Bibliographic Notes 
9.7 Exercises 

Chapter 10 Adaptive Routing 
10.1 Adaptive Routing Basics 
10.2 Minimal Adaptive Routing 
10.3 Fully Adaptive Routing 
10.4 Load-Balanced Adaptive Routing 
10.5 Search-Based Routing 
10.6 Case Study: Adaptive Routing in the
Thinking Machines CM-5 
10.7 Bibliographic Notes 
10.8 Exercises 

Chapter 11 Routing Mechanics 
11.1 Table-Based Routing 
11.2 Algorithmic Routing 
11.3 Case Study: Oblivious Source Routing in the
IBM Vulcan Network 
11.4 Bibliographic Notes 
11.5 Exercises 

Chapter 12 Flow Control Basics 
12.1 Resources and Allocation Units 
12.2 Bufferless Flow Control 
12.3 Circuit Switching 
12.4 Bibliographic Notes 
12.5 Exercises 

Chapter 13 Buffered Flow Control 
13.1 Packet-Buffer Flow Control 
13.2 Flit-Buffer Flow Control 
13.3 Buffer Management and Backpressure 
13.4 Flit-Reservation Flow Control 
13.5 Bibliographic Notes 
13.6 Exercises 

Chapter 14 Deadlock and Livelock 
14.1 Deadlock 
14.2 Deadlock Avoidance 
14.3 Adaptive Routing 
14.4 Deadlock Recovery 
14.5 Livelock 
14.6 Case Study: Deadlock Avoidance in the Cray T3E 
14.7 Bibliographic Notes 
14.8 Exercises 

Chapter 15 Quality of Service 
15.1 Service Classes and Service Contracts 
15.2 Burstiness and Network Delays 
15.3 Implementation of Guaranteed Services 
15.4 Implementation of Best-Effort Services 
15.5 Separation of Resources 
15.6 Case Study: ATM Service Classes 
15.7 Case Study: Virtual Networks in the Avici TSR 
15.8 Bibliographic Notes 
15.9 Exercises 

Chapter 16 Router Architecture 
16.1 Basic Router Architecture 
16.2 Stalls 
16.3 Closing the Loop with Credits 
16.4 Reallocating a Channel 
16.5 Speculation and Lookahead 
16.6 Flit and Credit Encoding 
16.7 Case Study: The Alpha 21364 Router 
16.8 Bibliographic Notes 
16.9 Exercises 

Chapter 17 Router Datapath Components 
17.1 Input Buffer Organization 
17.2 Switches 
17.3 Output Organization 
17.4 Case Study: The Datapath of the IBM Colony
Router 
17.5 Bibliographic Notes 
17.6 Exercises 

Chapter 18 Arbitration 
18.1 Arbitration Timing 
18.2 Fairness 
18.3 Fixed Priority Arbiter 
18.4 Variable Priority Iterative Arbiters 
18.5 Matrix Arbiter 
18.6 Queuing Arbiter 
18.7 Exercises 

Chapter 19 Allocation 
19.1 Representations
19.2 Exact Algorithms
19.3 Separable Allocators 
19.4 Wavefront Allocator 
19.5 Incremental vs. Batch Allocation 
19.6 Multistage Allocation 
19.7 Performance of Allocators 
19.8 Case Study: The Tiny Tera Allocator 
19.9 Bibliographic Notes 
19.10 Exercises

Chapter 20 Network Interfaces 
20.1 Processor-Network Interface 
20.2 Shared-Memory Interface 
20.3 Line-Fabric Interface 
20.4 Case Study: The MIT M-Machine Network Interface 
20.5 Bibliographic Notes 
20.6 Exercises 

Chapter 21 Error Control 411
21.1 Know Thy Enemy: Failure Modes and Fault Models 
21.2 The Error Control Process: Detection, Containment,
and Recovery 
21.3 Link Level Error Control 
21.4 Router Error Control 
21.5 Network-Level Error Control 
21.6 End-to-end Error Control 
21.7 Bibliographic Notes 
21.8 Exercises 

Chapter 22 Buses 
22.1 Bus Basics 
22.2 Bus Arbitration 
22.3 High Performance Bus Protocol 
22.4 From Buses to Networks 
22.5 Case Study: The PCI Bus 
22.6 Bibliographic Notes 
22.7 Exercises 

Chapter 23 Performance Analysis 
23.1 Measures of Interconnection Network Performance 
23.2 Analysis 
23.3 Validation
23.4 Case Study: Efficiency and Loss in the
BBN Monarch Network 
23.5 Bibliographic Notes 
23.6 Exercises 

Chapter 24 Simulation 
24.1 Levels of Detail 
24.2 Network Workloads 
24.3 Simulation Measurements 
24.4 Simulator Design 
24.5 Bibliographic Notes 
24.6 Exercises 

Chapter 25 Simulation Examples 495
25.1 Routing
25.2 Flow Control Performance 
25.3 Fault Tolerance 

Appendix A Nomenclature 
Appendix B Glossary 
Appendix C Network Simulator

Principles and Practices of Interconnection Networks

A deadlock-free routing algorithm can be generated for arbitrary interconnection networks using the concept of virtual channels. A necessary and sufficient condition for deadlock-free routing is the absence of cycles in a channel dependency graph. Given an arbitrary network and a routing function, the cycles of the channel dependency graph can be removed by splitting physical channels into groups of virtual channels. This method is used to develop deadlock-free routing algorithms for k-ary n-cubes, for cube-connected cycles, and for shuffle-exchange networks.

/pdf/deadlock-free-message-routing-in-multiprocessor-12k3wv8len.pdf

Deadlock-Free Message Routing in Multiprocessor Interconnection Networks

A calculus is developed for obtaining bounds on delay and buffering requirements in a communication network operating in a packet switched mode under a fixed routing strategy. The theory developed is different from traditional approaches to analyzing delay because the model used to describe the entry of data into the network is nonprobabilistic. It is supposed that the data stream entered into the network by any given user satisfies burstiness constraints. A data stream is said to satisfy a burstiness constraint if the quantity of data from the stream contained in any interval of time is less than a value that depends on the length of the interval. Several network elements are defined that can be used as building blocks to model a wide variety of communication networks. Each type of network element is analyzed by assuming that the traffic entering it satisfies bursting constraints. Under this assumption, bounds are obtained on delay and buffering requirements for the network element; burstiness constraints satisfied by the traffic that exits the element are derived. >

A calculus for network delay. I. Network elements in isolation

A deadlock-free routing algorithm can be generated for arbitrary interconnection networks using the concept of virtual channels. A necessary and sufficient condition for deadlockfree routing is the absence of cycles in the channel dependency graph. Given an arbitrary network and a routing function, the cycles of the channel dependency graph can be removed by splitting physical channels into groups of virtual channels. This method is used to develop deadlock-free routing algorithms for k-ary n-cubes, for cube connected cycles, and for shuffle? exchange networks.
(This is a revised version of 5206-tr-86)

Deadlock-free message routing in multiprocessor interconnection networks

To support bursty traffic on the Internet (and especially WWW) efficiently, optical burst switching (OBS) is proposed as a way to streamline both protocols and hardware in building the future generation Optical Internet. By leveraging the attractive properties of optical communications and at the same time, taking into account its limitations, OBS combines the best of optical circuit-switching and packet/cell switching. In this paper, the general concept of OBS protocols and in particular, those based on Just-Enough-Time (JET), is described, along with the applicability of OBS protocols to IP over WDM. Specific issues such as the use of fiber delay-lines (FDLs) for accommodating processing delay and/or resolving conflicts are also discussed. In addition, the performance of JET-based OBS protocols which use an offset time along with delayed reservation to achieve efficient utilization of both bandwidth and FDLs as well as to support priority-based routing is evaluated.

Optical burst switching (OBS) - a new paradigm for an optical Internet

https://www.lk.cs.ucla.edu/data/files/Kermani/Virtual%20Cut-through%20A%20New%20Computer%20Communication%20Switching.pdf

Virtual cut-through: A new computer communication switching technique

This paper is concerned with a comparison study of three switching techniques used in computer-based communication networks: circuit switching, message (packet) switching, and cut-through switching. Our comparison is based on the delay performance as obtained through analytic models of these techniques. For circuit switching, the model reflects the phenomenon of channel reservation through which it can be shown that when circuit switching is used, data communication networks saturate rapidly. Through numerical examples, it is shown that the boundary between the areas of relative effectiveness of these switching techniques depends very much on the network topology (more precisely the path length of communication), the message length, and the useful utilization.

Parviz Kermani

Papers

Virtual cut-through: A new computer communication switching technique

A tradeoff study of switching systems in computer communication networks

Reprint of “Virtual cut-through: A new computer communication switching technique”

Professor Leonard Kleinrock – Tribute Volume