Advancements of wave energy converters based on power take off (PTO) systems: A review

Ocean waves are a promising source of renewable energy In this paper, we briefly introduce the characteristics of ocean wave energy and summarize the principles of harvesting ocean energy by wave 

/pdf/review-of-control-strategies-for-wave-energy-conversion-2zougsa133.pdf

Review of control strategies for wave energy conversion systems and their validation: the wave-to-wire approach

The Wavestar Wave Energy Converter (WEC) is a multiple absorber concept, consisting of 20 hemisphere shaped floats attached to a single platform. The heart of the Wavestar WEC is the Power Take-Off (PTO) system, converting the wave induced motion of the floats into a steady power output to the grid. In the present work, a PTO based on a novel discrete displacement fluid power technology is explored for the Wavestar WEC. Absorption of power from the floats is performed by hydraulic cylinders, supplying power to a common fixed pressure system with accumulators for energy smoothing. The stored pressure energy is converted into electricity at a steady pace by hydraulic motors and generators. The storage, thereby, decouples the complicated process of wave power absorption from power generation. The core for enabling this PTO technology is implementing a near loss-free force control of the energy absorbing cylinders. This is achieved by using special multi-chambered cylinders, where the different chambers may be connected to the available system pressures using fast on/off valves. Resultantly, a Discrete Displacement Cylinder (DDC) is created, allowing near loss free discrete force control. This paper presents a complete PTO system for a 20 float Wavestar based on the DDC. The WEC and PTO is rigorously modeled from incident waves to the electric output to the grid. The resulting model of +600 states is simulated in different irregular seas, showing that power conversion efficiencies above 70% from input power to electrical power is achievable for all relevant sea conditions.

Discrete Displacement Hydraulic Power Take-Off System for the Wavestar Wave Energy Converter

https://digitalcommons.mtu.edu/cgi/viewcontent.cgi?article=1767&context=etdr

Optimal control of wave energy converters

Power take-off concept for wave energy converters based on oil-hydraulic transformer units

This paper presents the construction, mathematical modeling and testing of a scaled universal hydraulic Power Take-Off (PTO) device for Wave Energy Converters (WECs). A specific prototype and test bench were designed and built to carry out the tests. The results obtained from these tests were used to adjust an in-house mathematical model. The PTO was initially designed to be coupled to a scaled wave energy capture device with a low speed and high torque oscillating motion and high power fluctuations. Any Energy Capture Device (ECD) that fulfils these requirements can be coupled to this PTO, provided that its scale is adequately defined depending on the rated power of the full scale prototype. The initial calibration included estimation of the pressure drops in the different components, the pressurization time of the oil inside the hydraulic cylinders and the volumetric efficiency of the complete circuit. Since the overall efficiency measured during the tests ranged from 0.69 to 0.8 and the dynamic performance of the PTO was satisfactory, the results are really promising and it is believed that this solution might prove effective in real devices.

/pdf/design-construction-and-testing-of-a-hydraulic-power-take-3u90vjjf0b.pdf

Design, Construction and Testing of a Hydraulic Power Take-Off for Wave Energy Converters

One of the key systems of a Wave Energy Converter for extraction of wave energy is the Power Take-Off (PTO) device. This device transforms the mechanical energy of a moving body into electrical energy. This paper describes the model of an innovative PTO based on independently activated double-acting hydraulic cylinders array. The model has been developed using a simulation tool, based on a port-based approach to model hydraulics systems. The components and subsystems used in the model have been parameterized as real components and their values experimentally obtained from an existing prototype. In fact, the model takes into account most of the hydraulic losses of each component. The simulations show the flexibility to apply different restraining torques to the input movement depending on the geometrical configuration and the hydraulic cylinders on duty, easily modified by a control law. The combination of these two actions allows suitable flexibility to adapt the device to different sea states whilst optimizing the energy extraction. The model has been validated using a real test bench showing good correlations between simulation and experimental tests.

https://www.mdpi.com/1996-1073/8/3/2230/pdf

Modeling Innovative Power Take-Off Based on Double-Acting Hydraulic Cylinders Array for Wave Energy Conversion

This document describes and demonstrates the features of a new innovative hydraulic Power take-Off (PTO) to be used for Wave Energy Conversion. This device is able to transform low frequency oscillating movement into a continuous high frequency angular speed, absorbing high fluctuated torque at the input shaft, which can reach up to 8000Nm. Moreover, the major breakthrough of this device is that it can control the braking torque through the modification of some geometrical parameters, L and R, and through the activation of more than one hydraulic cylinder together with the pressure. The output shaft of the PTO is able to rotate at different continuous rated speed through the actuation on a specific control valve at the inlet of the hydraulic motor. Tests to check the behavior of the PTO related to the smoothening of the power output and concerning the time needed to increase the high pressure and the time available after the accumulation of some quantity of energy in different initial conditions are presented.

Patxi Estensoro

Papers

Design, Construction and Testing of a Hydraulic Power Take-Off for Wave Energy Converters

Modeling Innovative Power Take-Off Based on Double-Acting Hydraulic Cylinders Array for Wave Energy Conversion

Innovative Hydraulic Power Take-Off Construction and Performance Tests for Wave Energy Conversion

Construction of a Universal Hydraulic Power Take-Off for Wave Energy Converters. Mathematical Modelling and Validation Testing