The adoption of a reconfigurable intelligent surface (RIS) for downlink multi-user communication from a multi-antenna base station is investigated in this paper. We develop energy-efficient designs for both the transmit power allocation and the phase shifts of the surface reflecting elements subject to individual link budget guarantees for the mobile users. This leads to non-convex design optimization problems for which to tackle we propose two computationally affordable approaches, capitalizing on alternating maximization, gradient descent search, and sequential fractional programming. Specifically, one algorithm employs gradient descent for obtaining the RIS phase coefficients, and fractional programming for optimal transmit power allocation. Instead, the second algorithm employs sequential fractional programming for the optimization of the RIS phase shifts. In addition, a realistic power consumption model for RIS-based systems is presented, and the performance of the proposed methods is analyzed in a realistic outdoor environment. In particular, our results show that the proposed RIS-based resource allocation methods are able to provide up to 300% higher energy efficiency in comparison with the use of regular multi-antenna amplify-and-forward relaying.

Reconfigurable Intelligent Surfaces for Energy Efficiency in Wireless Communication

The rapid uptake of mobile devices and the rising popularity of mobile applications and services pose unprecedented demands on mobile and wireless networking infrastructure. Upcoming 5G systems are evolving to support exploding mobile traffic volumes, real-time extraction of fine-grained analytics, and agile management of network resources, so as to maximize user experience. Fulfilling these tasks is challenging, as mobile environments are increasingly complex, heterogeneous, and evolving. One potential solution is to resort to advanced machine learning techniques, in order to help manage the rise in data volumes and algorithm-driven applications. The recent success of deep learning underpins new and powerful tools that tackle problems in this space. In this paper, we bridge the gap between deep learning and mobile and wireless networking research, by presenting a comprehensive survey of the crossovers between the two areas. We first briefly introduce essential background and state-of-the-art in deep learning techniques with potential applications to networking. We then discuss several techniques and platforms that facilitate the efficient deployment of deep learning onto mobile systems. Subsequently, we provide an encyclopedic review of mobile and wireless networking research based on deep learning, which we categorize by different domains. Drawing from our experience, we discuss how to tailor deep learning to mobile environments. We complete this survey by pinpointing current challenges and open future directions for research.

/pdf/deep-learning-in-mobile-and-wireless-networking-a-survey-ct8cy2kuqi.pdf

Deep Learning in Mobile and Wireless Networking: A Survey

The adoption of a Reconfigurable Intelligent Surface (RIS) for downlink multi-user communication from a multi-antenna base station is investigated in this paper. We develop energy-efficient designs for both the transmit power allocation and the phase shifts of the surface reflecting elements, subject to individual link budget guarantees for the mobile users. This leads to non-convex design optimization problems for which to tackle we propose two computationally affordable approaches, capitalizing on alternating maximization, gradient descent search, and sequential fractional programming. Specifically, one algorithm employs gradient descent for obtaining the RIS phase coefficients, and fractional programming for optimal transmit power allocation. Instead, the second algorithm employs sequential fractional programming for the optimization of the RIS phase shifts. In addition, a realistic power consumption model for RIS-based systems is presented, and the performance of the proposed methods is analyzed in a realistic outdoor environment. In particular, our results show that the proposed RIS-based resource allocation methods are able to provide up to $300\%$ higher energy efficiency, in comparison with the use of regular multi-antenna amplify-and-forward relaying.

As a powerful tool, the vehicular network has been built to connect human communication and transportation around the world for many years to come. However, with the rapid growth of vehicles, the vehicular network becomes heterogeneous, dynamic, and large scaled, which makes it difficult to meet the strict requirements, such as ultralow latency, high reliability, high security, and massive connections of the next-generation (6G) network. Recently, machine learning (ML) has emerged as a powerful artificial intelligence (AI) technique to make both the vehicle and wireless communication highly efficient and adaptable. Naturally, employing ML into vehicular communication and network becomes a hot topic and is being widely studied in both academia and industry, paving the way for the future intelligentization in 6G vehicular networks. In this article, we provide a survey on various ML techniques applied to communication, networking, and security parts in vehicular networks and envision the ways of enabling AI toward a future 6G vehicular network, including the evolution of intelligent radio (IR), network intelligentization, and self-learning with proactive exploration.

Future Intelligent and Secure Vehicular Network Toward 6G: Machine-Learning Approaches

Employing large intelligent surfaces (LISs) is a promising solution for improving the coverage and rate of future wireless systems. These surfaces comprise massive numbers of nearly-passive elements that interact with the incident signals, for example by reflecting them, in a smart way that improves the wireless system performance. Prior work focused on the design of the LIS reflection matrices assuming full channel knowledge. Estimating these channels at the LIS, however, is a key challenging problem. With the massive number of LIS elements, channel estimation or reflection beam training will be associated with (i) huge training overhead if all the LIS elements are passive (not connected to a baseband) or with (ii) prohibitive hardware complexity and power consumption if all the elements are connected to the baseband through a fully-digital or hybrid analog/digital architecture. This paper proposes efficient solutions for these problems by leveraging tools from compressive sensing and deep learning. First, a novel LIS architecture based on sparse channel sensors is proposed. In this architecture, all the LIS elements are passive except for a few elements that are active (connected to the baseband). We then develop two solutions that design the LIS reflection matrices with negligible training overhead. In the first approach, we leverage compressive sensing tools to construct the channels at all the LIS elements from the channels seen only at the active elements. In the second approach, we develop a deep-learning based solution where the LIS learns how to interact with the incident signal given the channels at the active elements, which represent the state of the environment and transmitter/receiver locations. We show that the achievable rates of the proposed solutions approach the upper bound, which assumes perfect channel knowledge, with negligible training overhead and with only a few active elements, making them promising for future LIS systems.

Enabling Large Intelligent Surfaces With Compressive Sensing and Deep Learning

Supporting high mobility in millimeter wave (mmWave) systems enables a wide range of important applications, such as vehicular communications and wireless virtual/augmented reality. Realizing this in practice, though, requires overcoming several challenges. First, the use of narrow beams and the sensitivity of mmWave signals to blockage greatly impact the coverage and reliability of highly-mobile links. Second, highly-mobile users in dense mmWave deployments need to frequently hand-off between base stations (BSs), which is associated with critical control and latency overhead. Furthermore, identifying the optimal beamforming vectors in large antenna array mmWave systems requires considerable training overhead, which significantly affects the efficiency of these mobile systems. In this paper, a novel integrated machine learning and coordinated beamforming solution is developed to overcome these challenges and enable highly-mobile mmWave applications. In the proposed solution, a number of distributed yet coordinating BSs simultaneously serve a mobile user. This user ideally needs to transmit only one uplink training pilot sequence that will be jointly received at the coordinating BSs using omni or quasi-omni beam patterns. These received signals draw a defining signature not only for the user location, but also for its interaction with the surrounding environment. The developed solution then leverages a deep learning model that learns how to use these signatures to predict the beamforming vectors at the BSs. This renders a comprehensive solution that supports highly mobile mmWave applications with reliable coverage, low latency, and negligible training overhead. Extensive simulation results based on accurate ray-tracing, show that the proposed deep-learning coordinated beamforming strategy approaches the achievable rate of the genie-aided solution that knows the optimal beamforming vectors with no training overhead. Compared with traditional beamforming solutions, the results show that the proposed deep learning-based strategy attains higher rates, especially in high-mobility large-array regimes.

Deep Learning Coordinated Beamforming for Highly-Mobile Millimeter Wave Systems

Supporting high mobility in millimeter wave (mmWave) systems enables a wide range of important applications such as vehicular communications and wireless virtual/augmented reality. Realizing this in practice, though, requires overcoming several challenges. First, the use of narrow beams and the sensitivity of mmWave signals to blockage greatly impact the coverage and reliability of highly-mobile links. Second, highly-mobile users in dense mmWave deployments need to frequently hand-off between base stations (BSs), which is associated with critical control and latency overhead. Further, identifying the optimal beamforming vectors in large antenna array mmWave systems requires considerable training overhead, which significantly affects the efficiency of these mobile systems. In this paper, a novel integrated machine learning and coordinated beamforming solution is developed to overcome these challenges and enable highly-mobile mmWave applications. In the proposed solution, a number of distributed yet coordinating BSs simultaneously serve a mobile user. This user ideally needs to transmit only one uplink training pilot sequence that will be jointly received at the coordinating BSs using omni or quasi-omni beam patterns. These received signals draw a defining signature not only for the user location, but also for its interaction with the surrounding environment. The developed solution then leverages a deep learning model that learns how to use these signatures to predict the beamforming vectors at the BSs. This renders a comprehensive solution that supports highly-mobile mmWave applications with reliable coverage, low latency, and negligible training overhead. Simulation results show that the proposed deep-learning coordinated beamforming strategy approaches the achievable rate of the genie-aided solution that knows the optimal beamforming vectors with no training overhead.

Wireless cellular networks have many parameters that are normally tuned upon deployment and re-tuned as the network changes. Many operational parameters affect reference signal received power (RSRP), reference signal received quality (RSRQ), signal-to-interference-plus-noise-ratio (SINR), and, ultimately, throughput. In this paper, we develop and compare two approaches for maximizing coverage and minimizing interference by jointly optimizing the transmit power and downtilt (elevation tilt) settings across sectors. To evaluate different parameter configurations offline, we construct a realistic simulation model that captures geographic correlations. Using this model, we evaluate two optimization methods: deep deterministic policy gradient (DDPG), a reinforcement learning (RL) algorithm, and multi-objective Bayesian optimization (BO). Our simulations show that both approaches significantly outperform random search and converge to comparable Pareto frontiers, but that BO converges with two orders of magnitude fewer evaluations than DDPG. Our results suggest that data-driven techniques can effectively self-optimize coverage and capacity in cellular networks.

Paul Varkey

Papers

Deep Learning Coordinated Beamforming for Highly-Mobile Millimeter Wave Systems

Deep Learning Coordinated Beamforming for Highly-Mobile Millimeter Wave Systems

Optimizing Coverage and Capacity in Cellular Networks using Machine Learning.

Optimizing Coverage and Capacity in Cellular Networks using Machine Learning

Aeroelastic Preliminary-Design Optimization of Communication Tower Structures