Wide-band-gap GaN and Ga-rich InGaN alloys, with energy gaps covering the blue and near-ultraviolet parts of the electromagnetic spectrum, are one group of the dominant materials for solid state lighting and lasing technologies and consequently, have been studied very well. Much less effort has been devoted to InN and In-rich InGaN alloys. A major breakthrough in 2002, stemming from much improved quality of InN films grown using molecular beam epitaxy, resulted in the bandgap of InN being revised from 1.9 eV to a much narrower value of 0.64 eV. This finding triggered a worldwide research thrust into the area of narrow-band-gap group-III nitrides. The low value of the InN bandgap provides a basis for a consistent description of the electronic structure of InGaN and InAlN alloys with all compositions. It extends the fundamental bandgap of the group III-nitride alloy system over a wider spectral region, ranging from the near infrared at ∼1.9 μm (0.64 eV for InN) to the ultraviolet at ∼0.36 μm (3.4 eV for GaN...

When group-III nitrides go infrared: New properties and perspectives

In this perspective, we take a critical look at the research progress within the nanowire community for the past decade We discuss issues on the discovery of fundamentally new phenomena versus performance benchmarking for many of the nanowire applications We also notice that both the bottom-up and top-down approaches have played important roles in advancing our fundamental understanding of this new class of nanostructures Finally we attempt to look into the future and offer our personal opinions on what the future trends will be in nanowire research

/pdf/semiconductor-nanowire-what-s-next-3b24320mit.pdf

Semiconductor nanowire: what's next?

Over the past decade, advances in LEDs have enabled the potential for wide-scale replacement of traditional lighting with solid-state light sources. If LED performance targets are realized, solid-state lighting will provide significant energy savings, important environmental benefits, and dramatically new ways to utilize and control light. In this paper, we review LED performance targets that are needed to achieve these benefits and highlight some of the remaining technical challenges. We describe recent advances in LED materials and novel device concepts that show promise for realizing the full potential of LED-based white lighting.

LEDs for Solid-State Lighting: Performance Challenges and Recent Advances

The manipulation of optical energy in structures smaller than the wavelength of light is key to the development of integrated photonic devices for computing, communications and sensing. Wide band gap semiconductor nanostructures with near-cylindrical geometry and large dielectric constants exhibit two-dimensional ultraviolet and visible photonic confinement (i.e. waveguiding). Combined with optical gain, the waveguiding behavior facilitates highly directional lasing at room temperature in controlled-growth nanowires with favorable resonant feedback. We have further explored the properties and functions of individual ultralong crystalline oxide nanoribbons that act as subwavelength optical waveguides, nonlinear frequency converter and assess their applicability as nanoscale photonic elements and scanning probes. Semiconductor nanowires offer a versatile photonic platform due to the ability to specify material size, shape, and composition. The integration of multiple unique materials with distinct optical properties promises to enable advances for several applications ranging from solid state lighting, biochemical sensing to imaging and spectroscopy.

http://ieeexplore.ieee.org/iel5/4302825/4302826/04302854.pdf

Nanowire Photonics

The nanowire geometry provides potential advantages over planar waferbased or thin-film solar cells in every step of the photoconversion process. These advantages include reduced reflection, extreme light trapping, improved band gap tuning, facile strain relaxation, and increased defect tolerance. These benefits are not expected to increase the maximum efficiency above standard limits; instead, they reduce the quantity and quality of material necessary to approach those limits, allowing for substantial cost reductions. Additionally, nanowires provide opportunities to fabricate complex single-crystalline semiconductor devices directly on low-cost substrates and electrodes such as aluminum foil, stainless steel, and conductive glass, addressing another major cost in current photovoltaic technology. This review describes nanowire solar cell synthesis and fabrication, important characterization techniques unique to nanowire systems, and advantages of the nanowire geometry.

Nanowire Solar Cells

The III nitrides have been intensely studied in recent years because of their huge potential for everything from high-efficiency solid-state lighting and photovoltaics to high-power and temperature electronics. In particular, the InGaN ternary alloy is of interest for solid-state lighting and photovoltaics because of the ability to tune the direct bandgap of this material from the near-ultraviolet to the near-infrared region. In an effort to synthesize InGaN nitride, researchers have tried many growth techniques. Nonetheless, there remains considerable difficulty in making high-quality InGaN films and/or freestanding nanowires with tunability across the entire range of compositions. Here we report for the first time the growth of single-crystalline In(x)Ga(1-x)N nanowires across the entire compositional range from x=0 to 1; the nanowires were synthesized by low-temperature halide chemical vapour deposition and were shown to have tunable emission from the near-ultraviolet to the near-infrared region. We propose that the exceptional composition tunability is due to the low process temperature and the ability of the nanowire morphology to accommodate strain-relaxed growth, which suppresses the tendency toward phase separation that plagues the thin-film community.

/pdf/complete-composition-tunability-of-ingan-nanowires-using-a-1xx4mphgso.pdf

Philipp Ulrich

Papers

Complete composition tunability of InGaN nanowires using a combinatorial approach