One of the greatest challenges faced by designers of digital systems is optimizing the communication and interconnection between system components. Interconnection networks offer an attractive and economical solution to this communication crisis and are fast becoming pervasive in digital systems. Current trends suggest that this communication bottleneck will be even more problematic when designing future generations of machines. Consequently, the anatomy of an interconnection network router and science of interconnection network design will only grow in importance in the coming years.

This book offers a detailed and comprehensive presentation of the basic principles of interconnection network design, clearly illustrating them with numerous examples, chapter exercises, and case studies. It incorporates hardware-level descriptions of concepts, allowing a designer to see all the steps of the process from abstract design to concrete implementation.

·Case studies throughout the book draw on extensive author experience in designing interconnection networks over a period of more than twenty years, providing real world examples of what works, and what doesn't.

·Tightly couples concepts with implementation costs to facilitate a deeper understanding of the tradeoffs in the design of a practical network.

·A set of examples and exercises in every chapter help the reader to fully understand all the implications of every design decision.

Table of Contents


Chapter 1 Introduction to Interconnection Networks 
1.1 Three Questions About Interconnection Networks 
1.2 Uses of Interconnection Networks 
1.3 Network Basics 
1.4 History 
1.5 Organization of this Book 

Chapter 2 A Simple Interconnection Network 
2.1 Network Specifications and Constraints 
2.2 Topology 
2.3 Routing 
2.4 Flow Control 
2.5 Router Design 
2.6 Performance Analysis 
2.7 Exercises 

Chapter 3 Topology Basics 
3.1 Nomenclature 
3.2 Traffic Patterns 
3.3 Performance 
3.4 Packaging Cost 
3.5 Case Study: The SGI Origin 2000 
3.6 Bibliographic Notes 
3.7 Exercises 

Chapter 4 Butterfly Networks 
4.1 The Structure of Butterfly Networks 
4.2 Isomorphic Butterflies 
4.3 Performance and Packaging Cost 
4.4 Path Diversity and Extra Stages 
4.5 Case Study: The BBN Butterfly 
4.6 Bibliographic Notes 
4.7 Exercises 

Chapter 5 Torus Networks 
5.1 The Structure of Torus Networks 
5.2 Performance 
5.3 Building Mesh and Torus Networks 
5.4 Express Cubes 
5.5 Case Study: The MIT J-Machine 
5.6 Bibliographic Notes 
5.7 Exercises 
Chapter 6 Non-Blocking Networks 
6.1 Non-Blocking vs. Non-Interfering Networks 
6.2 Crossbar Networks 
6.3 Clos Networks 
6.4 Benes Networks 
6.5 Sorting Networks 
6.6 Case Study: The Velio VC2002 (Zeus) Grooming Switch 
6.7 Bibliographic Notes 
6.8 Exercises 

Chapter 7 Slicing and Dicing 
7.1 Concentrators and Distributors 
7.2 Slicing and Dicing 
7.3 Slicing Multistage Networks 
7.4 Case Study: Bit Slicing in the Tiny Tera 
7.5 Bibliographic Notes 
7.6 Exercises 

Chapter 8 Routing Basics 
8.1 A Routing Example 
8.2 Taxonomy of Routing Algorithms 
8.3 The Routing Relation 
8.4 Deterministic Routing 
8.5 Case Study: Dimension-Order Routing in the Cray T3D 
8.6 Bibliographic Notes 
8.7 Exercises 

Chapter 9 Oblivious Routing 
9.1 Valiant's Randomized Routing Algorithm 
9.2 Minimal Oblivious Routing 
9.3 Load-Balanced Oblivious Routing 
9.4 Analysis of Oblivious Routing 
9.5 Case Study: Oblivious Routing in the
Avici Terabit Switch Router(TSR) 
9.6 Bibliographic Notes 
9.7 Exercises 

Chapter 10 Adaptive Routing 
10.1 Adaptive Routing Basics 
10.2 Minimal Adaptive Routing 
10.3 Fully Adaptive Routing 
10.4 Load-Balanced Adaptive Routing 
10.5 Search-Based Routing 
10.6 Case Study: Adaptive Routing in the
Thinking Machines CM-5 
10.7 Bibliographic Notes 
10.8 Exercises 

Chapter 11 Routing Mechanics 
11.1 Table-Based Routing 
11.2 Algorithmic Routing 
11.3 Case Study: Oblivious Source Routing in the
IBM Vulcan Network 
11.4 Bibliographic Notes 
11.5 Exercises 

Chapter 12 Flow Control Basics 
12.1 Resources and Allocation Units 
12.2 Bufferless Flow Control 
12.3 Circuit Switching 
12.4 Bibliographic Notes 
12.5 Exercises 

Chapter 13 Buffered Flow Control 
13.1 Packet-Buffer Flow Control 
13.2 Flit-Buffer Flow Control 
13.3 Buffer Management and Backpressure 
13.4 Flit-Reservation Flow Control 
13.5 Bibliographic Notes 
13.6 Exercises 

Chapter 14 Deadlock and Livelock 
14.1 Deadlock 
14.2 Deadlock Avoidance 
14.3 Adaptive Routing 
14.4 Deadlock Recovery 
14.5 Livelock 
14.6 Case Study: Deadlock Avoidance in the Cray T3E 
14.7 Bibliographic Notes 
14.8 Exercises 

Chapter 15 Quality of Service 
15.1 Service Classes and Service Contracts 
15.2 Burstiness and Network Delays 
15.3 Implementation of Guaranteed Services 
15.4 Implementation of Best-Effort Services 
15.5 Separation of Resources 
15.6 Case Study: ATM Service Classes 
15.7 Case Study: Virtual Networks in the Avici TSR 
15.8 Bibliographic Notes 
15.9 Exercises 

Chapter 16 Router Architecture 
16.1 Basic Router Architecture 
16.2 Stalls 
16.3 Closing the Loop with Credits 
16.4 Reallocating a Channel 
16.5 Speculation and Lookahead 
16.6 Flit and Credit Encoding 
16.7 Case Study: The Alpha 21364 Router 
16.8 Bibliographic Notes 
16.9 Exercises 

Chapter 17 Router Datapath Components 
17.1 Input Buffer Organization 
17.2 Switches 
17.3 Output Organization 
17.4 Case Study: The Datapath of the IBM Colony
Router 
17.5 Bibliographic Notes 
17.6 Exercises 

Chapter 18 Arbitration 
18.1 Arbitration Timing 
18.2 Fairness 
18.3 Fixed Priority Arbiter 
18.4 Variable Priority Iterative Arbiters 
18.5 Matrix Arbiter 
18.6 Queuing Arbiter 
18.7 Exercises 

Chapter 19 Allocation 
19.1 Representations
19.2 Exact Algorithms
19.3 Separable Allocators 
19.4 Wavefront Allocator 
19.5 Incremental vs. Batch Allocation 
19.6 Multistage Allocation 
19.7 Performance of Allocators 
19.8 Case Study: The Tiny Tera Allocator 
19.9 Bibliographic Notes 
19.10 Exercises

Chapter 20 Network Interfaces 
20.1 Processor-Network Interface 
20.2 Shared-Memory Interface 
20.3 Line-Fabric Interface 
20.4 Case Study: The MIT M-Machine Network Interface 
20.5 Bibliographic Notes 
20.6 Exercises 

Chapter 21 Error Control 411
21.1 Know Thy Enemy: Failure Modes and Fault Models 
21.2 The Error Control Process: Detection, Containment,
and Recovery 
21.3 Link Level Error Control 
21.4 Router Error Control 
21.5 Network-Level Error Control 
21.6 End-to-end Error Control 
21.7 Bibliographic Notes 
21.8 Exercises 

Chapter 22 Buses 
22.1 Bus Basics 
22.2 Bus Arbitration 
22.3 High Performance Bus Protocol 
22.4 From Buses to Networks 
22.5 Case Study: The PCI Bus 
22.6 Bibliographic Notes 
22.7 Exercises 

Chapter 23 Performance Analysis 
23.1 Measures of Interconnection Network Performance 
23.2 Analysis 
23.3 Validation
23.4 Case Study: Efficiency and Loss in the
BBN Monarch Network 
23.5 Bibliographic Notes 
23.6 Exercises 

Chapter 24 Simulation 
24.1 Levels of Detail 
24.2 Network Workloads 
24.3 Simulation Measurements 
24.4 Simulator Design 
24.5 Bibliographic Notes 
24.6 Exercises 

Chapter 25 Simulation Examples 495
25.1 Routing
25.2 Flow Control Performance 
25.3 Fault Tolerance 

Appendix A Nomenclature 
Appendix B Glossary 
Appendix C Network Simulator

Principles and Practices of Interconnection Networks

We describe Bro, a stand-alone system for detecting network intruders in real-time by passively monitoring a network link over which the intruder's traffic transits. We give an overview of the system's design, which emphasizes high-speed (FDDI-rate) monitoring, real-time notification, clear separation between mechanism and policy, and extensibility. To achieve these ends, Bro is divided into an "event engine" that reduces a kernel-filtered network traffic stream into a series of higher-level events, and a "policy script interpreter" that interprets event handlers written in a specialized language used to express a site's security policy. Event handlers can update state information, synthesize new events, record information to disk, and generate real-time notifications via syslog. We also discuss a number of attacks that attempt to subvert passive monitoring systems and defenses against these, and give particulars of how Bro analyzes the four applications integrated into it so far: Finger, FTP, Portmapper and Telnet. The system is publicly available in source code form.

Bro: a system for detecting network intruders in real-time

https://www.usenix.org/legacy/publications/library/proceedings/sec98/full_papers/paxson/paxson.pdf

While today's computer networks support only best-effort service, future packet-switching integrated-services networks will have to support real-time communication services that allow clients to transport information with performance guarantees expressed in terms of delay, delay jitter, throughput, and loss rate. An important issue in providing guaranteed performance service is the choice of the packet service discipline at switching nodes. In this paper, we survey several service disciplines that are proposed in the literature to provide per-connection end-to-end performance guarantees in packet-switching networks. We describe their mechanisms, their similarities and differences and the performance guarantees they can provide. Various issues and tradeoffs in designing service disciplines for guaranteed performance service are discussed, and a general framework for studying and comparing these disciplines are presented. >

/pdf/service-disciplines-for-guaranteed-performance-service-in-yk74mpzi11.pdf

Service disciplines for guaranteed performance service in packet-switching networks

We review different aspects of the simulation of spiking neural networks. We start by reviewing the different types of simulation strategies and algorithms that are currently implemented. We next review the precision of those simulation strategies, in particular in cases where plasticity depends on the exact timing of the spikes. We overview different simulators and simulation environments presently available (restricted to those freely available, open source and documented). For each simulation tool, its advantages and pitfalls are reviewed, with an aim to allow the reader to identify which simulator is appropriate for a given task. Finally, we provide a series of benchmark simulations of different types of networks of spiking neurons, including Hodgkin-Huxley type, integrate-and-fire models, interacting with current-based or conductance-based synapses, using clock-driven or event-driven integration strategies. The same set of models are implemented on the different simulators, and the codes are made available. The ultimate goal of this review is to provide a resource to facilitate identifying the appropriate integration strategy and simulation tool to use for a given modeling problem related to spiking neural networks.

Simulation of networks of spiking neurons: A review of tools and strategies

A new priority queue implementation for the future event set problem is described in this article. The new implementation is shown experimentally to be O(1) in queue size for the priority increment distributions recently considered by Jones in his review article. It displays hold times three times shorter than splay trees for a queue size of 10,000 events. The new implementation, called a calendar queue, is a very simple structure of the multiple list variety using a novel solution to the overflow problem.

R. Brown

Papers

Calendar queues: a fast 0(1) priority queue implementation for the simulation event set problem