The resonant modes of plasmonic nanoparticle structures made of gold or silver endow them with an ability to manipulate light at the nanoscale. However, owing to the high light losses caused by metals at optical wavelengths, only a small fraction of plasmonics applications have been realized. Kuznetsov et al. review how high-index dielectric nanoparticles can offer a substitute for these metals, providing a highly flexible and low-loss route to the manipulation of light at the nanoscale.

Science , this issue p. [10.1126/science.aag2472][1]

 [1]: /lookup/doi/10.1126/science.aag2472

http://science.sciencemag.org/content/sci/354/6314/aag2472.full.pdf

Optically resonant dielectric nanostructures

Wireless power technology offers the promise of cutting the last cord, allowing users to seamlessly recharge mobile devices as easily as data are transmitted through the air. Initial work on the use of magnetically coupled resonators for this purpose has shown promising results. We present new analysis that yields critical insight into the design of practical systems, including the introduction of key figures of merit that can be used to compare systems with vastly different geometries and operating conditions. A circuit model is presented along with a derivation of key system concepts, such as frequency splitting, the maximum operating distance (critical coupling), and the behavior of the system as it becomes undercoupled. This theoretical model is validated against measured data and shows an excellent average coefficient of determination of 0.9875. An adaptive frequency tuning technique is demonstrated, which compensates for efficiency variations encountered when the transmitter-to-receiver distance and/or orientation are varied. The method demonstrated in this paper allows a fixed-load receiver to be moved to nearly any position and/or orientation within the range of the transmitter and still achieve a near-constant efficiency of over 70% for a range of 0-70 cm.

/pdf/analysis-experimental-results-and-range-adaptation-of-2xhdldcpe3.pdf

Analysis, Experimental Results, and Range Adaptation of Magnetically Coupled Resonators for Wireless Power Transfer

Metamaterials are composed of periodic subwavelength metal/dielectric structures that resonantly couple to the electric and/or magnetic components of the incident electromagnetic fields, exhibiting properties that are not found in nature. This class of micro- and nano-structured artificial media have attracted great interest during the past 15 years and yielded ground-breaking electromagnetic and photonic phenomena. However, the high losses and strong dispersion associated with the resonant responses and the use of metallic structures, as well as the difficulty in fabricating the micro- and nanoscale 3D structures, have hindered practical applications of metamaterials. Planar metamaterials with subwavelength thickness, or metasurfaces, consisting of single-layer or few-layer stacks of planar structures, can be readily fabricated using lithography and nanoprinting methods, and the ultrathin thickness in the wave propagation direction can greatly suppress the undesirable losses. Metasurfaces enable a spatially varying optical response (e.g. scattering amplitude, phase, and polarization), mold optical wavefronts into shapes that can be designed at will, and facilitate the integration of functional materials to accomplish active control and greatly enhanced nonlinear response. This paper reviews recent progress in the physics of metasurfaces operating at wavelengths ranging from microwave to visible. We provide an overview of key metasurface concepts such as anomalous reflection and refraction, and introduce metasurfaces based on the Pancharatnam-Berry phase and Huygens' metasurfaces, as well as their use in wavefront shaping and beam forming applications, followed by a discussion of polarization conversion in few-layer metasurfaces and their related properties. An overview of dielectric metasurfaces reveals their ability to realize unique functionalities coupled with Mie resonances and their low ohmic losses. We also describe metasurfaces for wave guidance and radiation control, as well as active and nonlinear metasurfaces. Finally, we conclude by providing our opinions of opportunities and challenges in this rapidly developing research field.

A review of metasurfaces: physics and applications.

Metamaterials are artificial structures that can be designed to exhibit specific electromagnetic properties not commonly found in nature. Recently, metamaterials with simultaneously negative permittivity (/spl epsiv/) and permeability (/spl mu/), more commonly referred to as left-handed (LH) materials, have received substantial attention in the scientific and engineering communities. The unique properties of LHMs have allowed novel applications, concepts, and devices to be developed. In this article, the fundamental electromagnetic properties of LHMs and the physical realization of these materials are reviewed based on a general transmission line (TL) approach. The general TL approach provides insight into the physical phenomena of LHMs and provides an efficient design tool for LH applications. LHMs are considered to be a more general model of composite right/left hand (CRLH) structures, which also include right-handed (RH) effects that occur naturally in practical LHMs. Characterization, design, and implementation of one-dimensional and two-dimensional CRLH TLs are examined. In addition, microwave devices based on CRLH TLs and their applications are presented.

Composite right/left-handed transmission line metamaterials

Metamaterials are composed of periodic subwavelength metal/dielectric structures that resonantly couple to the electric and/or magnetic components of the incident electromagnetic fields, exhibiting properties that are not found in nature. Planar metamaterials with subwavelength thickness, or metasurfaces, consisting of single-layer or few-layer stacks of planar structures, can be readily fabricated using lithography and nanoprinting methods, and the ultrathin thickness in the wave propagation direction can greatly suppress the undesirable losses. Metasurfaces enable a spatially varying optical response, mold optical wavefronts into shapes that can be designed at will, and facilitate the integration of functional materials to accomplish active control and greatly enhanced nonlinear response. This paper reviews recent progress in the physics of metasurfaces operating at wavelengths ranging from microwave to visible. We provide an overview of key metasurface concepts such as anomalous reflection and refraction, and introduce metasurfaces based on the Pancharatnam-Berry phase and Huygens' metasurfaces, as well as their use in wavefront shaping and beam forming applications, followed by a discussion of polarization conversion in few-layer metasurfaces and their related properties. An overview of dielectric metasurfaces reveals their ability to realize unique functionalities coupled with Mie resonances and their low ohmic losses. We also describe metasurfaces for wave guidance and radiation control, as well as active and nonlinear metasurfaces. Finally, we conclude by providing our opinions of opportunities and challenges in this rapidly developing research field.

A review of metasurfaces: physics and applications

Open dielectric resonators (DRs) offer attractive features as antenna elements. These include their small size, mechanical simplicity, high radiation efficiency due to no inherent conductor loss, relatively large bandwidth, simple coupling schemes to nearly all commonly used transmission lines, and the advantage of obtaining different radiation characteristics using different modes of the resonator. In this article, we give a comprehensive review of the modes and the radiation characteristics of DRs of different shapes, such as cylindrical, cylindrical ring, spherical, and rectangular. Further, accurate closed form expressions are derived for the resonant frequencies, radiation Q-factors, and the inside fields of a cylindrical DR. These design expressions are valid over a wide range of DR parameters. Finally, the techniques used to feed DR antennas are discussed. © 1994 John Wiley & Sons, Inc.

Dielectric resonator antennas—a review and general design relations for resonant frequency and bandwidth

Introduction. Microwave Network Theory. Characteristics of Planar Transmission Lines. Analysis of Uniformerly Coupled Lines. Broadband Forward-Wave Directional Couplers. Parallel-Coupled TEM Directional Couplers. Nonuniform Broadband TEM Directional Couplers. Tight Couplers. Coupled-Line Filter Fundamentals. Advanced Coupled-Line Filters. Filters for Advanced Materials and Technologies. Coupled-Line Circuit Components. Baluns.

RF and microwave coupled-line circuits

A dielectric resonator antenna system is disclosed wherein a dielectric material having a high dielectric constant is placed between a dielectric resonator antenna (DRA) and the antenna feed. Preferably the dielectric material having a high dielectric constant is either in the form of an insert within a cavity of the DRA or alternatively is in the form of a thin layer between the feed and the DRA for enhancing coupling therebetween. It is preferred that the high dielectric constant material be at least twice the value of the dielectric resonator antenna.

Broadband nonhomogeneous multi-segmented dielectric resonator antenna system

Low profile rectangular dielectric resonator antennas, fabricated out of a very high permittivity material ( epsilon /sub r/=100) are reported. An antenna having a height of approximately 0.026 lambda /sub 0/ and a bandwidth of 3% is demonstrated.<
 >

Low profile dielectric resonator antennas using a very high permittivity material

Radiation efficiency (due to conduction and dielectric losses) of dielectric resonator antennas has been measured. Results show that for dielectric resonators placed directly on a metallic plane, the conduction losses are quite small. A radiation efficiency of >98% has been measured for dielectric resonator antennas operated in the dominant hybrid (HE/sub 11/spl delta//) mode. Theoretical considerations show scope of further improvement in the radiation efficiency by choosing optimum resonator parameters. >

R.K. Mongia

Papers

Dielectric resonator antennas—a review and general design relations for resonant frequency and bandwidth

RF and microwave coupled-line circuits

Broadband nonhomogeneous multi-segmented dielectric resonator antenna system

Low profile dielectric resonator antennas using a very high permittivity material

Measurement of radiation efficiency of dielectric resonator antennas