R
Rafael García
Researcher at Universidad Michoacana de San Nicolás de Hidalgo
Publications - 26
Citations - 259
Rafael García is an academic researcher from Universidad Michoacana de San Nicolás de Hidalgo. The author has contributed to research in topics: Welding & Heat-affected zone. The author has an hindex of 7, co-authored 26 publications receiving 223 citations. Previous affiliations of Rafael García include University of Nottingham.
Papers
More filters
Journal ArticleDOI
Effect of magnetic field applied during gas metal arc welding on the resistance to localised corrosion of the heat affected zone in AISI 304 stainless steel
TL;DR: In this article, the magnetic field during welding induced lower sensitivity to localised corrosion at the heat affected zone (HAZ) of AISI 304 stainless steel gas metal arc welded (GMAW) in presence of magnetic fields of different intensity.
Journal ArticleDOI
The microstructure and mechanical strength of Al-6061-T6 GMA welds obtained with the modified indirect electric arc joint
TL;DR: In this article, Al-6061-T6 with a thickness of 12.7 mm was welded with a non-heat treatable ER4043 electrode in four welding passes using the typical single V groove butt joint and in one pass using the modified indirect electric arc (MIEA) joint.
Journal ArticleDOI
A comparative study of the mechanical properties of 6061-T6 GMA welds obtained by the indirect electric arc (IEA) and the modified indirect electric arc (MIEA)
TL;DR: In this paper, a 6061-T6 aluminium alloy with 12.7mm in thickness was welded with the gas metal arc welding process (GMAW) using three different joint designs; a single V groove butt joint, the indirect electric arc (IEA) joint and the modified indirect electrical arc joint (MIEA), which requires preheating of the plates prior welding to achieve full penetration with an ER-4043 filler wire.
Journal ArticleDOI
A comparative study of the MIG welding of AI/TiC composites using direct and indirect electric arc processes
TL;DR: In this paper, metal inert gas welding of Al-1010/TiC/50p composites was carried out on 9 mm thick square bars by applying the electric arc directly and indirectly.
Journal ArticleDOI
Welding of Al-359/20%SiCp metal matrix composites by the novel MIG process with indirect electric arc (IEA)
TL;DR: An Al-based composite reinforced with 20%SiCp was welded using the MIG welding process with direct and indirect application of the electric arc (DEA and IEA) as mentioned in this paper.