A review of anode catalysis in the direct methanol fuel cell

4.2. Solid-Supported Electrolytes 2280 4.3. Solid-Supported Mediators 2282 4.4. Supported Substrate-Product Capture 2283 4.5. A Unique Electrolyte/Solvent System 2285 5. Reaction Conditions 2285 5.1. Supercritical Fluids 2285 5.1.1. Electrochemical Properties of scCO2 2285 5.1.2. Electroreductive Carboxylation in scCO2 2286 5.1.3. Electrochemical Polymerization in scCO2 2286 5.2. The Cation-Pool Method 2286 5.2.1. Generation of N-Acyliminium Ion Pools 2286 5.2.2. Generation of Alkoxycarbenium Ion Pools 2287 5.2.3. Generation of Diarylcarbenium Ion Pools 2288 5.2.4. Generation of Other Cation Pools 2289 6. Electrochemical Devices 2289 6.1. Electrode Materials 2289 6.2. Ultrasound and Centrifugal Fields 2290 6.3. Electrochemical Microflow Systems 2290 7. Combinatorial Electrochemical Synthesis 2292 7.1. Parallel Electrolysis Using a Macrosystem 2292 7.2. Parallel Electrolysis Using a Microsystem 2293 7.3. Serial Electrolysis Using a Microsystem 2294 8. Conclusions 2294 9. Acknowledgments 2294 10. References 2294

Modern Strategies in Electroorganic Synthesis

Carbon supported platinum is commonly used as anode and cathode electrocatalyst in low-temperature fuel cells fuelled with hydrogen or low molecular weight alcohols. The cost of Pt and the limited world supply are significant barriers to the widespread use of these types of fuel cells. Moreover, platinum used as anode material is readily poisoned by carbon monoxide, present in the reformate gas used as H2 carrier in the case of polymer electrolyte fuel cells, and a byproduct of alcohol oxidation in the case of direct alcohol fuel cells. In addition, Pt alone does not present satisfactory activity for the oxygen reduction reaction when used as cathode material. For all these reasons, binary and ternary platinum-based catalysts and non-platinum-based catalysts have been tested as electrode materials for low temperature fuel cells. Palladium and platinum have very similar properties because they belong to the same group in the periodic table. The activity for the oxygen reduction reaction (ORR) of Pd is only slightly lower than that of Pt, and by addition of a suitable metal, such as Co or Fe, the ORR activity of Pd can overcome that of Pt. Conversely, the activity for the hydrogen oxidation reaction (HOR) of Pd is considerably lower than that of Pt, but by adding of a very small amount (5 at%) of Pt, the HOR activity of Pd attains that of pure Pt. This paper presents an overview of Pd and Pd-containing catalysts, tested both as anode and cathode materials for low-temperature fuel cells.

Palladium in fuel cell catalysis

The controllable incorporation of multiple immiscible elements into a single nanoparticle merits untold scientific and technological potential, yet remains a challenge using conventional synthetic techniques. We present a general route for alloying up to eight dissimilar elements into single-phase solid-solution nanoparticles, referred to as high-entropy-alloy nanoparticles (HEA-NPs), by thermally shocking precursor metal salt mixtures loaded onto carbon supports [temperature ~2000 kelvin (K), 55-millisecond duration, rate of ~10 5 K per second]. We synthesized a wide range of multicomponent nanoparticles with a desired chemistry (composition), size, and phase (solid solution, phase-separated) by controlling the carbothermal shock (CTS) parameters (substrate, temperature, shock duration, and heating/cooling rate). To prove utility, we synthesized quinary HEA-NPs as ammonia oxidation catalysts with ~100% conversion and >99% nitrogen oxide selectivity over prolonged operations.

Carbothermal shock synthesis of high-entropy-alloy nanoparticles

Electrooxidation of methanol in sulfuric acid solution was studied using Pt, Pt/Ni(1:1 and 3:1), Pt/Ru/Ni(5:4:1 and 6:35:05), and Pt/Ru(1:1) alloy nanoparticle catalysts, in relation to methanol oxidation processes in the direct oxidation methanol fuel cell The Pt/Ni and Pt/Ru/Ni alloys showed excellent catalytic activities compared to those of pure Pt and Pt/Ru The role of Ni as a catalytically enhancing agent in the oxidation process was interrogated using cyclic voltammetry, chronoamperometry, X-ray photoelectron spectroscopy, transmission electron microscopy, and X-ray diffraction X-ray diffraction data showed alloy formation for all Pt/Ni, Pt/Ru/Ni, and Pt/Ru nanoparticles, whereas X-ray photoelectron spectroscopy confirmed that chemical states of Pt were exclusively metallic The presence of metallic Ni, NiO, Ni(OH)2, NiOOH, metallic Ru, RuO2, and RuO3 was also confirmed We found that the Pt4f binding energies for the Pt/Ni and Pt/Ru/Ni alloy nanoparticles were lower than those for clean Pt na

Chemical and Electronic Effects of Ni in Pt/Ni and Pt/Ru/Ni Alloy Nanoparticles in Methanol Electrooxidation

Combinatorial screening of electrochemical catalysts by current-voltage methods can be unwieldy for large sample sizes. By converting the ions generated in an electrochemical half-cell reaction to a fluorescence signal, the most active compositions in a large electrode array have been identified. A fluorescent acid-base indicator was used to image high concentrations of hydrogen ions, which were generated in the electrooxidation of methanol. A 645-member electrode array containing five elements (platinum, ruthenium, osmium, iridium, and rhodium), 80 binary, 280 ternary, and 280 quaternary combinations was screened to identify the most active regions of phase space. Subsequent “zoom” screens pinpointed several very active compositions, some in ternary and quaternary regions that were bounded by rather inactive binaries. The best catalyst, platinum(44)/ruthenium(41)/osmium(10)/iridium(5) (numbers in parentheses are atomic percent), was significantly more active than platinum(50)/ruthenium(50) in a direct methanol fuel cell operating at 60°C, even though the latter catalyst had about twice the surface area of the former.

https://science.sciencemag.org/content/sci/280/5370/1735.full.pdf

Rameshkrishnan Viswanathan

Papers

Combinatorial Electrochemistry: A Highly Parallel, Optical Screening Method for Discovery of Better Electrocatalysts