http://pubs.acs.org/doi/pdfplus/10.1021/cr300162p

Deep Eutectic Solvents (DESs) and Their Applications

Within the framework of green chemistry, solvents occupy a strategic place. To be qualified as a green medium, these solvents have to meet different criteria such as availability, non-toxicity, biodegradability, recyclability, flammability, and low price among others. Up to now, the number of available green solvents are rather limited. Here we wish to discuss a new family of ionic fluids, so-called Deep Eutectic Solvents (DES), that are now rapidly emerging in the current literature. A DES is a fluid generally composed of two or three cheap and safe components that are capable of self-association, often through hydrogen bond interactions, to form a eutectic mixture with a melting point lower than that of each individual component. DESs are generally liquid at temperatures lower than 100 °C. These DESs exhibit similar physico-chemical properties to the traditionally used ionic liquids, while being much cheaper and environmentally friendlier. Owing to these remarkable advantages, DESs are now of growing interest in many fields of research. In this review, we report the major contributions of DESs in catalysis, organic synthesis, dissolution and extraction processes, electrochemistry and material chemistry. All works discussed in this review aim at demonstrating that DESs not only allow the design of eco-efficient processes but also open a straightforward access to new chemicals and materials.

Deep eutectic solvents: syntheses, properties and applications

Deep Eutectic Solvents (DES) can be formed between a variety of quaternary ammonium salts and carboxylic acids. The physical properties are significantly affected by the structure of the carboxylic acid but the phase behavior of the mixtures can be simply modeled by taking account of the mole fraction of carboxylic acid in the mixture. The physical properties such as viscosity, conductivity, and surface tension of these DES are similar to ambient temperature ionic liquids and insight into the cause of these properties is gained using hole-theory. It is shown that the conductivity and viscosity of these liquids is controlled by ion mobility and the availability of voids of suitable dimensions, and this is consistent with the fluidity of other ionic liquids and molten salts. The DES are also shown to be good solvents for metal oxides, which could have potential application for metal extraction.

Deep Eutectic Solvents Formed between Choline Chloride and Carboxylic Acids: Versatile Alternatives to Ionic Liquids

2.5. Stabilization of IL Emulsions by Nanoparticles 2623 3. Hydrogenations in ILs 2623 3.1. Hydrogenation on IL-Stabilized Nanoparticles 2623 3.1.1. Hydrogenation of 1,3-Butadiene 2623 3.1.2. Hydrogenation of Alkenes and Arenes 2624 3.1.3. Hydrogenation of Ketones 2624 3.2. Homogeneous Catalytic Hydrogenation in ILs 2624 3.3. Hydrogenation of Functionalized ILs 2625 3.3.1. Selective Hydrogenation of Polymers 2625 3.4. Asymmetric Hydrogenations 2626 3.4.1. Enantioselective Hydrogenation 2626 3.5. Role of the ILs Purity in Hydrogenation Reactions 2628

Catalysis in ionic liquids

Sustainability, industrial ecology, eco-efficiency, and green chemistry are directing the development of the next generation of materials, products, and processes. Biodegradable plastics and biocompatible composites generated from renewable biomass feedstock are regarded as promising materials that could replace synthetic polymers and reduce global dependence on fossil fuel sources.1 It is estimated that the world is currently consuming petroleum at a rate 100 000 times faster than nature can replace it.2 The growing global environmental awareness and societal concern, high rate of depletion of petroleum resources, concepts of sustainability, and new environmental regulations have triggered the search for new products and processes that are more compatible with the environment. The most abundant natural polymer in our environment is cellulose. It has an estimated annual biosphere production of 90 × 109 metric tons and, consequently, represents the most obvious renewable resource for producing biocomposites.3 Its highly ordered structure is responsible for its desirable mechanical properties but makes it a challenge to find suitable solvents for its dissolution.4 The first attempts to dissolve cellulose date back to the early 1920s.5 Several aqueous and nonaqueous cellulose solvents have been discovered since then, but all of these solvents suffer either from high environmental toxicity or from insufficient solvation power.6 In general, the traditional cellulose dissolution processes require relatively harsh conditions and the use of expensive and uncommon solvents, which usually cannot be recovered after the process.6-10 However, a new class of solvents was opened to the cellulose research community, when in 2002 Swatloski et al. reported the use of an ionic liquid as solvent for cellulose both for the regeneration of cellulose and for the chemical modification of the polysaccharide.7 In 1934, Graenacher had discovered a solvent system with the ability to dissolve cellulose, but this was thought to be of little practical value at the time.11,12 Ionic liquids are a group of salts that exist as liquids at relatively low temperatures (<100 °C). They have many attractive properties, including chemical and thermal stability, nonflammability, and immeasurably low vapor pressure.12 First discovered in 1914 by Walden, their huge potential in industry and research was only realized within the last few decades.13,14 This review aims to provide a summary of our current state of knowledge on the structural features of wood * To whom correspondence should be addressed. E-mail: ken.marsh@ canterbury.ac.nz. Tel.: +64 3364 2140. Fax: +64 3364 2063. † Department of Chemical and Process Engineering. ‡ Department of Mechanical Engineering. Andre Pinkert was born in Schwabach, Germany, in 1981. He studied Chemistry at the University of Erlangen-Nurnberg, Germany, and received his prediploma and diploma degrees in 2004 and 2008, respectively. During 2005, he joined the Marine Natural Products Group, lead by Murray H. Munro and John W. Blunt, at the University of Canterbury (UoC), New Zealand, working on the isolation and characterization of bioactive metabolites. In early 2006, he returned to Germany and resumed his studies at the University of Erlangen-Nurnberg, finishing his degree under the supervision of Rudi van Eldik. Associated with his studies, during 2007, he worked for AREVA NP on radio-nuclear chemistry and computer modeling. Since 2008, he is studying towards a Ph.D. degree at UoC under the supervision of Shusheng Pang, Ken Marsh, and Mark Staiger. His research focuses on biocomposites from natural fibers, processed via ionic liquids. Chem. Rev. 2009, 109, 6712–6728 6712

Ray K. Rasheed

Papers

Quaternary ammonium zinc- or tin-containing ionic liquids: water insensitive, recyclable catalysts for Diels–Alder reactions