Use of the real-time polymerase chain reaction (PCR) to amplify cDNA products reverse transcribed from mRNA is on the way to becoming a routine tool in molecular biology to study low abundance gene expression. Real-time PCR is easy to perform, provides the necessary accuracy and produces reliable as well as rapid quantification results. But accurate quantification of nucleic acids requires a reproducible methodology and an adequate mathematical model for data analysis. This study enters into the particular topics of the relative quantification in real-time RT–PCR of a target gene transcript in comparison to a reference gene transcript. Therefore, a new mathematical model is presented. The relative expression ratio is calculated only from the real-time PCR efficiencies and the crossing point deviation of an unknown sample versus a control. This model needs no calibration curve. Control levels were included in the model to standardise each reaction run with respect to RNA integrity, sample loading and inter-PCR variations. High accuracy and reproducibility (<2.5% variation) were reached in LightCycler PCR using the established mathematical model.

/pdf/a-new-mathematical-model-for-relative-quantification-in-real-2rwc9jj6m2.pdf

A new mathematical model for relative quantification in real-time RT-PCR.

Gene-expression analysis is increasingly important in biological research, with real-time reverse transcription PCR (RT-PCR) becoming the method of choice for high-throughput and accurate expression profiling of selected genes. Given the increased sensitivity, reproducibility and large dynamic range of this methodology, the requirements for a proper internal control gene for normalization have become increasingly stringent. Although housekeeping gene expression has been reported to vary considerably, no systematic survey has properly determined the errors related to the common practice of using only one control gene, nor presented an adequate way of working around this problem. We outline a robust and innovative strategy to identify the most stably expressed control genes in a given set of tissues, and to determine the minimum number of genes required to calculate a reliable normalization factor. We have evaluated ten housekeeping genes from different abundance and functional classes in various human tissues, and demonstrated that the conventional use of a single gene for normalization leads to relatively large errors in a significant proportion of samples tested. The geometric mean of multiple carefully selected housekeeping genes was validated as an accurate normalization factor by analyzing publicly available microarray data. The normalization strategy presented here is a prerequisite for accurate RT-PCR expression profiling, which, among other things, opens up the possibility of studying the biological relevance of small expression differences.

/pdf/accurate-normalization-of-real-time-quantitative-rt-pcr-data-34rwzsvnu5.pdf

Accurate normalization of real-time quantitative RT-PCR data by geometric averaging of multiple internal control genes

Background: Currently, a lack of consensus exists on how best to perform and interpret quantitative real-time PCR (qPCR) experiments. The problem is exacerbated by a lack of sufficient experimental detail in many publications, which impedes a reader’s ability to evaluate critically the quality of the results presented or to repeat the experiments.

Content: The Minimum Information for Publication of Quantitative Real-Time PCR Experiments (MIQE) guidelines target the reliability of results to help ensure the integrity of the scientific literature, promote consistency between laboratories, and increase experimental transparency. MIQE is a set of guidelines that describe the minimum information necessary for evaluating qPCR experiments. Included is a checklist to accompany the initial submission of a manuscript to the publisher. By providing all relevant experimental conditions and assay characteristics, reviewers can assess the validity of the protocols used. Full disclosure of all reagents, sequences, and analysis methods is necessary to enable other investigators to reproduce results. MIQE details should be published either in abbreviated form or as an online supplement.

Summary: Following these guidelines will encourage better experimental practice, allowing more reliable and unequivocal interpretation of qPCR results.

/pdf/the-miqe-guidelines-minimum-information-for-publication-of-27m8n04lrd.pdf

The MIQE Guidelines: Minimum Information for Publication of Quantitative Real-Time PCR Experiments

Real-time reverse transcription followed by polymerase chain reaction (RT–PCR) is the most suitable method for the detection and quantification of mRNA. It offers high sensitivity, good reproducibility and a wide quantification range. Today, relative expression is increasingly used, where the expression of a target gene is standardised by a non-regulated reference gene. Several mathematical algorithms have been developed to compute an expression ratio, based on real-time PCR efficiency and the crossing point deviation of an unknown sample versus a control. But all published equations and available models for the calculation of relative expression ratio allow only for the determination of a single transcription difference between one control and one sample. Therefore a new software tool was established, named REST© (relative expression software tool), which compares two groups, with up to 16 data points in a sample and 16 in a control group, for reference and up to four target genes. The mathematical model used is based on the PCR efficiencies and the mean crossing point deviation between the sample and control group. Subsequently, the expression ratio results of the four investigated transcripts are tested for significance by a randomisation test. Herein, development and application of REST© is explained and the usefulness of relative expression in real-time PCR using REST© is discussed. The latest software version of REST© and examples for the correct use can be downloaded at http://www.wzw.tum.de/gene-quantification/.

/pdf/relative-expression-software-tool-rest-for-group-wise-42xnca1758.pdf

Relative expression software tool (REST©) for group-wise comparison and statistical analysis of relative expression results in real-time PCR

We have developed novel nucleic acid probes that recognize and report the presence of specific nucleic acids in homogeneous solutions. These probes undergo a spontaneous fluorogenic conformational change when they hybridize to their targets. Only perfectly complementary targets elicit this response, as hybridization does not occur when the target contains a mismatched nucleotide or a deletion. The probes are particularly suited for monitoring the synthesis of specific nucleic acids in real time. When used in nucleic acid amplification assays, gene detection is homogeneous and sensitive, and can be carried out in a sealed tube. When introduced into living cells, these probes should enable the origin, movement, and fate of specific mRNAs to be traced.

Molecular Beacons: Probes that Fluoresce upon Hybridization

We describe a simple, quantitative assay for any amplifiable DNA sequence that uses a video camera to monitor multiple polymerase chain reactions (PCRs) simultaneously over the course of thermocycling. The video camera detects the accumulation of double-stranded DNA (dsDNA) in each PCR using the increase in the fluorescence of ethidium bromide (EtBr) that results from its binding duplex DNA. The kinetics of fluorescence accumulation during thermocycling are directly related to the starting number of DNA copies. The fewer cycles necessary to produce a detectable fluorescence, the greater the number of target sequences. Results obtained with this approach indicate that a kinetic approach to PCR analysis can quantitate DNA sensitively, selectively and over a large dynamic range. This approach also provides a means of determining the effect of different reaction conditions on the efficacy of the amplification and so can provide insight into fundamental PCR processes.

Kinetic PCR Analysis: Real-time Monitoring of DNA Amplification Reactions

A process of detecting a target nucleic acid using labeled oligonucleotides uses the 5′ to 3′ nuclease activity of a nucleic acid polymerase to cleave annealed labeled oligonucleotide from hybridized duplexes and release labeled oligonucleotide fragments for detection. This process is easily incorporated into a PCR amplification, assay.

Homogeneous assay system

An apparatus for monitoring multiple nucleic acid amplifications simultaneously. In order to provide real-time monitoring of the amplification product of multiple nucleic acid amplifications simultaneously the apparatus is characterized in that it comprises a thermal cycler (12) including a heat conducting member having multiple recesses formed therein; and a sensor (16a) arranged for detecting light emitted from said recesses, simultaneously.

Monitoring multiple reactions simultaneously and analyzing same

http://www.gene-quantification.org/lee-opt-2002.pdf

Quantitation of residual WBCs in filtered blood components by high-throughput, real-time kinetic PCR

Publisher Summary The real-time monitoring of polymerase chain reaction (PCR) amplifications, or kinetic PCR analysis, allows one to follow PCR DNA replication on a cycle-by-cycle basis. In contrast with other ways of quantitation based on PCR, kinetic PCR has the advantages of being a "closed-tube" assay, including mechanical simplicity, high throughput, and containment of potential carryover contamination. It also has the ability to quantify over a range of many logs of target concentration without the sample dilution needed by other methods. This chapter discusses the various approaches to monitor the PCR amplifications including cycle-by-cycle monitoring. Cycle-by-cycle monitoring allows one to trace a "growth curve" or profile for a PCR that is perfectly analogous to that of a bacterial culture's growth. The chapter empathizes on the use of a charged-coupled device (CCD) camera, which is a simpler, less expensive method of monitoring multiple PCRs. It does the quantitative, digital imaging of the PCRs as they sit in the thermocycler block. A thermocycler block is a compact, light-tight enclosure, fitted over a thermal cycler, avoids the need for a darkroom. It requires less space, and decreases the distance between the camera and the samples, making the collection of fluorescence more efficient. The chapter illustrates several figures and diagrams for the better understanding of the machines.

/pdf/kinetic-pcr-analysis-using-a-ccd-camera-and-without-using-e0jclqht2k.pdf

Robert M. Watson

Papers

Kinetic PCR Analysis: Real-time Monitoring of DNA Amplification Reactions

Homogeneous assay system

Monitoring multiple reactions simultaneously and analyzing same

Quantitation of residual WBCs in filtered blood components by high-throughput, real-time kinetic PCR

Kinetic PCR analysis using a CCD camera and without using oligonucleotide probes