Environmental friendly bio-dyeing of silk using Alkanna tinctoria based Alkannin natural dye

Sustainability in all applied fields particularly in textiles is to protect our globe, environment, and community, where green dyed products are playing their role. For the current study, Esfand (Peganum harmala) has been explored using a green isolation tool, i.e., ultrasonic (U.S.) rays, and applied onto fabric. Different dyeing parameters have been explored statistically through response surface methodology by employing temperature (50-80°C), time (25-65 min), extract volume (15-55 mL), salt (1-5 g/100 mL), and dye bath pH (4-7) through series of experiments. For developing new shades, green mordants such as elaichi, neem, turmeric, and zeera have been utilized. It has been found that exposure of 35 mL extract of 7 pH containing 3 g/100 mL of salt as exhausting agent to U.S. rays for 30 min for the dyeing of silk at 70°C for 45 min has given maximum color strength with reddish-yellow shades. Color characteristics obtained in the CIE Lab system reveal that 5% of turmeric as meta bio-mordant has given good quality reddish-yellow shades. It is found that U.S. rays have not only good potential to isolate colorant followed by dyeing of silk under reduced condition but also the application of bio-mordants have made the process more greener, sustainable, and cleaner.

Eco-friendly approach towards isolation of colorant from Esfand for bio-mordanted silk dyeing.

Sustainable isolation of licorice (Glycyrrhiza glabra L.)-based yellow natural colorant for dyeing of bio-mordanted cotton

Clean dyeing of cotton fabrics by cationic colored nanospheres

ABSTRACT Environmental issues are rising day by day in the global community due to the cumulative effects of hazardous effluent load and due to the introduction of biological active natural products into all aspects of life. In this study, the waste tea-leaves-based tannin natural dye has been extracted under the influence of microwave treatment and employed onto bio-mordanted wool fabric. For extraction of dye, microwave (MW) irradiation up to 6 min has been employed and for improvement in color strength, bio-mordants in comparison with chemicals mordants. It has been found that acidic extract of tea leaves after MW treatment for 6 min has given excellent color depth (K/S) on MW treated wool at 80°C. Using bio-mordants, it has been found that 4% of acacia extract, 1% of pomegranate extract and 5% of turmeric extract as pre bio-mordant, whereas 5% of acacia and 2% of pomegranate and turmeric as post bio-mordants have given excellent color strength, whereas in comparison, ferrous sulfate (2%) has given excellent results. It has been concluded that microwave treatment as an environmentally sustainable tool has not only improved the color strength of tannins dye onto wool fabric but also with the addition of bio-mordants has made the process more sustainable.

https://doi.org/10.1080/15440478.2022.2136322

Sustainable Application of Microwave Assisted Extracted Tea Based Tannin Natural Dye for Chemical and Bio-Mordanted Wool Fabric

The worldwide resurgence of natural dyes in all fields is due to the carcinogenic effects of effluent loads shed by synthetic industries. Coconut coir (Cocos nucifera) containing tannin as a source of natural colorants has been selected for coloration of bio-mordanted silk under the influence of ultrasonic radiations at various dyeing conditions. For extraction of tannin dye from cocos powder, different media were employed, and dyeing variables such as dyeing time, dye bath pH, dyeing bath temperature, and the effect of salts on dyeing were optimized. For achieving new shades with excellent color characteristics, bio-mordants in comparison with chemical mordants were employed. It has been found that acid-solubilized extract after ultrasonic treatment for 45 min has yielded high color strength, when coconut coir extract of 4 pH from 6g of cocos powder, containing 5g/100mL salt solution as exhaust agent, was used to dye silk at 75°C for 65 min. Among bio-mordants turmeric (K/S=13.828) and among chemical mordants iron has shown excellent results (K/S=2.0856). Physiochemical analysis of fabric before and after US treatment shows that there is no change in the chemical structure of the fabric. It is found that ultrasonic waves have excellent potential to isolate the colorant followed by dyeing and environmental friendly mordanting at optimal conditions, but also the usage of herbal-based plant anchors, i.e., bio-mordants, has made the natural dyeing process more sustainable and clean.

Sajid Raza Habib

Papers

Ecofriendly application of coconut coir (Cocos nucifera) extract for silk dyeing